PRS+: Enhanced firmware for Sony Reader, Folders, Games & more - Page 133

kartu · 04-06-2011, 10:29 AM

ewandeep
PRS+ doesn't need any folders in IM after installation.
Some PRS+ config files could be put into /database/system/PRSPlus and that's it.

There might be something wrong with the sites you are trying to download from. Could you share the link?

ewandeep · 04-06-2011, 11:44 AM

Quote:

Originally Posted by kartu

ewandeep
PRS+ doesn't need any folders in IM after installation.
Some PRS+ config files could be put into /database/system/PRSPlus and that's it.

There might be something wrong with the sites you are trying to download from. Could you share the link?

It's a website (but I also tried to download files from my dropbox account too) from which I download my newspaper.

http://simplicissimus.lastampa.it/abbonati/?act=home
I sent you a temporary password and username for test purpose by pm.
Please also send me a website working, so I can test it.

kartu · 04-06-2011, 11:58 AM

ewandeep
Sites with authentication won't work (hopefully "yet").
Try to download from Guttenberg Project

ewandeep · 04-06-2011, 12:18 PM

Kartu
Thank you,
Download newspaper and books from website with login, was one of the reasons, I replaced the 650 with the 950.
I hope the very good prs+ enhancement will also add this feature in the next few months.

combat2k · 04-15-2011, 03:44 AM

hello guys, me again ;-)

after 2 months of using normally my PRS-600 with the previous version of PRS+ CFW, I've encountered a strange behavior. By strange I mean that 2 days ago, after the battery was exhausted, the PRS+ disappeared and the original Sony FW was installed. Someone can give me a hint why this happened? :-)

I'll try tonight, hopefully, the new kartu's CFW, but if I did something wrong until today, please let me know ;-)

TIA.

kartu · 04-15-2011, 04:00 AM

combat2k

It's "safe mode" I guess. If reader is connected to USB during boot, PRS+ doesn't start.

combat2k · 04-15-2011, 04:14 AM

Well, if that happened first time after battery was empty, it still happens right now when starting/restarting not connected to USB.

kartu · 04-15-2011, 04:29 AM

Quote:

Originally Posted by combat2k

Well, if that happened first time after battery was empty, it still happens right now when starting/restarting not connected to USB.

Are you sure you mean full shutdown / startup and not simply on/off switch?

combat2k · 04-15-2011, 04:38 AM

so, just to sum up:

- first I've noticed that no power on on/off switch;
- I've connected the PRS to USB for loading, it was charging and it started in default Sony FW (at that time I even didn't noticed that it was the default FW :-))) )
- after a while, I've noticed that :-), and I did a full shutdown/restart without connecting it to USB, but the default FW was still there..

So... Do you need extra info or smthg else?

Thank you in advance for your quick answer, your involvement and all your help!

Regards,
Dan.

kartu · 04-15-2011, 04:51 AM

Please try to do full shutdown / boot again, without connecting it to USB.

combat2k · 04-15-2011, 05:03 AM

no way, it worked!!! but why?? because I've restart it yesterday without being connected to a PC (did I ? or I just have to take some medicine for my memory??) :-)))

Anyway, jeez, wrong moments for me to panic ;-)) problem solved, my PRS+ 2.0.5alpha back in business ;-)

kartu, do you recommend me to upgrate to latest PRS+ alpha?

Thanks again for you help.

kartu · 04-15-2011, 05:07 AM

Well, check changelog wiki page on the project site, if anything new appeals to you, update.

combat2k · 04-15-2011, 05:18 AM

I was just about to read them, thank you, you're the man! ;-)

elcreative · 04-17-2011, 08:59 AM

Just a quick query... will the enhanced mount return in the final version of PRS+2.0.10... I just installed the alpha on my 505 and lost access to about half of the 7-8GB on the card, just like original problem with large card/data usage so have had to revert to 1.1.3 to restore this. Given a choice of reading direct from card or accessing whole contents but reading from IM then the latter wins at the moment...

kartu · 04-17-2011, 09:55 AM

Yes, it will return. Both "hard" disabling of scan and "via mount".

04-15-2011, 04:38 AM	#1989
combat2k Member Posts: 15 Karma: 10 Join Date: Nov 2010 Device: PRS600	so, just to sum up: - first I've noticed that no power on on/off switch; - I've connected the PRS to USB for loading, it was charging and it started in default Sony FW (at that time I even didn't noticed that it was the default FW :-))) ) - after a while, I've noticed that :-), and I did a full shutdown/restart without connecting it to USB, but the default FW was still there.. So... Do you need extra info or smthg else? Thank you in advance for your quick answer, your involvement and all your help! Regards, Dan. Last edited by combat2k; 04-15-2011 at 04:39 AM. Reason: more things to add

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using HD Folders as Collections on Sony PRS-505	fglaysher	Calibre	8	07-26-2010 10:55 PM
Enhanced Firmware for V3	keng2000	HanLin eBook	12	04-12-2010 10:30 AM
Poll: Sony Reader PRS-505 upgrade to Sony PRS-700	Kris777	Sony Reader	70	02-18-2009 07:34 PM
Sony Reader PRS-505 upgrade to Sony PRS-700	Kris777	Sony Reader	23	12-08-2008 07:56 AM
Sub folders in firmware v1.08	Prince Hal	Amazon Kindle	28	10-23-2008 04:20 PM

04-06-2011, 10:29 AM	#1981
kartu PRS+ author Posts: 1,637 Karma: 2446233 Join Date: Dec 2007 Device: Sony PRS-300, 505, 600, 650, 950	ewandeep PRS+ doesn't need any folders in IM after installation. Some PRS+ config files could be put into /database/system/PRSPlus and that's it. There might be something wrong with the sites you are trying to download from. Could you share the link?

04-06-2011, 11:58 AM	#1983
kartu PRS+ author Posts: 1,637 Karma: 2446233 Join Date: Dec 2007 Device: Sony PRS-300, 505, 600, 650, 950	ewandeep Sites with authentication won't work (hopefully "yet"). Try to download from Guttenberg Project

04-06-2011, 12:18 PM	#1984
ewandeep Zealot Posts: 110 Karma: 5368 Join Date: Apr 2010 Location: Italy Device: Sony PRS-T1 Sony PRS-350 Nook Touch Glow	Kartu Thank you, Download newspaper and books from website with login, was one of the reasons, I replaced the 650 with the 950. I hope the very good prs+ enhancement will also add this feature in the next few months.

04-15-2011, 03:44 AM	#1985
combat2k Member Posts: 15 Karma: 10 Join Date: Nov 2010 Device: PRS600	hello guys, me again ;-) after 2 months of using normally my PRS-600 with the previous version of PRS+ CFW, I've encountered a strange behavior. By strange I mean that 2 days ago, after the battery was exhausted, the PRS+ disappeared and the original Sony FW was installed. Someone can give me a hint why this happened? :-) I'll try tonight, hopefully, the new kartu's CFW, but if I did something wrong until today, please let me know ;-) TIA.

04-15-2011, 04:00 AM	#1986
kartu PRS+ author Posts: 1,637 Karma: 2446233 Join Date: Dec 2007 Device: Sony PRS-300, 505, 600, 650, 950	combat2k It's "safe mode" I guess. If reader is connected to USB during boot, PRS+ doesn't start.

04-15-2011, 04:14 AM	#1987
combat2k Member Posts: 15 Karma: 10 Join Date: Nov 2010 Device: PRS600	Well, if that happened first time after battery was empty, it still happens right now when starting/restarting not connected to USB.

04-15-2011, 04:51 AM	#1990
kartu PRS+ author Posts: 1,637 Karma: 2446233 Join Date: Dec 2007 Device: Sony PRS-300, 505, 600, 650, 950	Please try to do full shutdown / boot again, without connecting it to USB.

04-15-2011, 05:03 AM	#1991
combat2k Member Posts: 15 Karma: 10 Join Date: Nov 2010 Device: PRS600	no way, it worked!!! but why?? because I've restart it yesterday without being connected to a PC (did I ? or I just have to take some medicine for my memory??) :-))) Anyway, jeez, wrong moments for me to panic ;-)) problem solved, my PRS+ 2.0.5alpha back in business ;-) kartu, do you recommend me to upgrate to latest PRS+ alpha? Thanks again for you help.

04-15-2011, 05:07 AM	#1992
kartu PRS+ author Posts: 1,637 Karma: 2446233 Join Date: Dec 2007 Device: Sony PRS-300, 505, 600, 650, 950	Well, check changelog wiki page on the project site, if anything new appeals to you, update.

04-15-2011, 05:18 AM	#1993
combat2k Member Posts: 15 Karma: 10 Join Date: Nov 2010 Device: PRS600	I was just about to read them, thank you, you're the man! ;-)

04-17-2011, 08:59 AM	#1994
elcreative Wizard Posts: 2,888 Karma: 5875940 Join Date: Dec 2007 Device: PRS505, 600, 350, 650, Nexus 7, Note III, iPad 4 etc	Just a quick query... will the enhanced mount return in the final version of PRS+2.0.10... I just installed the alpha on my 505 and lost access to about half of the 7-8GB on the card, just like original problem with large card/data usage so have had to revert to 1.1.3 to restore this. Given a choice of reading direct from card or accessing whole contents but reading from IM then the latter wins at the moment...

04-17-2011, 09:55 AM	#1995
kartu PRS+ author Posts: 1,637 Karma: 2446233 Join Date: Dec 2007 Device: Sony PRS-300, 505, 600, 650, 950	Yes, it will return. Both "hard" disabling of scan and "via mount".