Trying out the pre-rooted update - Page 4

Driaz · 01-30-2011, 03:51 AM

Success going from 1.0.1 autonootered (not the latest version, I rooted a couple days before the last release) to 1.1.0 via this method. I have not had any issues at all. I think those that have had problems are using this method from rooted 1.0.0.

I'll have to go to BN tomorrow and see if read in store works....

....I've never actually read in store, but for those expiring library books, might as well finish the book for free in BN....

gtriever · 01-30-2011, 06:27 AM

Thanks go out to volwrath for the heads up on r2.

After several hours of running the 1.1 Pre-Root, I started experiencing some odd behavior. A quick reflash with the r2 release seems to have solved everything. In fact, the NC seems a bit more responsive than it was on the 1.0.1 release.

volwrath · 01-30-2011, 11:52 AM

Quote:

Originally Posted by Driaz

Success going from 1.0.1 autonootered (not the latest version, I rooted a couple days before the last release) to 1.1.0 via this method. I have not had any issues at all. I think those that have had problems are using this method from rooted 1.0.0..

That is not a correct statement (sadly) I went from 1.0.1 to 1.1.0 r1 and have run into many of the same issues. Currently getting ready to try again with r2, although based on some reading at xda, i do not have the highest of hopes.

emt · 01-30-2011, 12:30 PM

Everything works very nicely if you use SetCPU - my observations:
************************************************** ************
I updated to Dolphin HD 4.3 - Pinch/Zoom does not work well - just as well since I don't really like Dolphin so I'm going to try either stock or XScope - any advice will be appreciated
************************************************** ******
This 1100 MHz kernel is really faster IMHO
************************************************** ******
SetCPU settings per XDA as follows

General is min 600 MHz, max 1100 MHz, ondemand, set on boot
Battery off is max 600 MHz, min 300 MHz, ondemand, set on boot
Advanced is sampling 150000

************************************************** *********

Last book read icon works perfectly!

************************************************** *********

Initial screen sensitivity was awful but on one or two reboots, it is now flawless and nicely sensitive - apps pop right up much faster than before.

************************************************** ***********

New market is sized properly for screen - all buttons show perfectly

************************************************** *******

Button Savior no longer works (except the Home Button does work)

SCION · 01-30-2011, 02:08 PM

Quote:

Originally Posted by emt

...

Button Savior no longer works (except the Home Button does work)

Try going into the app itself and select Kill/Start Button Savior Service. This happened to me last night. I was ready to uninstall/reinstall, then I remembered reading somewhere that the app stops working and needs to be reset. Another reason could be that you lost USB Debugging. Go into the NOOKcolor Tools app >All Settings > Development > USB Debugging (check the box).

PegS · 01-30-2011, 02:19 PM

Huh, Button Savior seems to work the same for me. Glad I dodged that one!

I'm noticing that Ultra Keyboard doesn't stay installed after a reboot. I have to go back, find the apk, re-install it, and re-choose it as my default keyboard. Is anyone having that problem with SlideIt, etc.?

Also, when I charge the NC, the light on the cord doesn't turn to green when fully charged. This was an issue I had when I first did the faux build.prop. I know it's not the cord itself because it still works for my husband's NC.

ETA: Okay, I just manually deleted the apk and reinstalled it from the new Market. It seems to have stuck after rebooting this time, so we'll see. However, No Lock isn't sticking after rebooting, and that's one that wasn't sideloaded originally.

emt · 01-30-2011, 03:13 PM

Quote:

Originally Posted by SCION

Try going into the app itself and select Kill/Start Button Savior Service. This happened to me last night. I was ready to uninstall/reinstall, then I remembered reading somewhere that the app stops working and needs to be reset. Another reason could be that you lost USB Debugging. Go into the NOOKcolor Tools app >All Settings > Development > USB Debugging (check the box).

It was the loss of USB debugging - thanks for the hint!

aagstn · 01-30-2011, 05:10 PM

I gave up the rooting and just went back to the stock 1.1. I'm honestly fine with the built in web browser now and most of the apps I had downloaded were for things I can bring up in the web browser. I may root again down the road, but first I want to see the app options B&N gives us. I'm very happy with the 1.1 update, though I still have books that don't show the covers. I wish I could figure that one out since many of my books show covers that didn't before the 1.1 update.

rogerperk · 01-30-2011, 06:41 PM

Quote:

Originally Posted by PegS

Huh, Button Savior seems to work the same for me. Glad I dodged that one!

I'm noticing that Ultra Keyboard doesn't stay installed after a reboot. I have to go back, find the apk, re-install it, and re-choose it as my default keyboard.

I downloaded UK but can't see where to select it. All I see is the default.

SCION · 01-30-2011, 07:00 PM

Quote:

Originally Posted by rogerperk

I downloaded UK but can't see where to select it. All I see is the default.

Did you put it in /system/app. It automatically goes into /data/app. You have to move it if you want to select it with NOOKcolor Tools.

Driaz · 01-30-2011, 07:51 PM

Quote:

Originally Posted by volwrath

That is not a correct statement (sadly) I went from 1.0.1 to 1.1.0 r1 and have run into many of the same issues. Currently getting ready to try again with r2, although based on some reading at xda, i do not have the highest of hopes.

Bummer....I wonder why some have no problems and others have so many? It seems that coming from the same software version should have similar results, but not so.

Did you have better luck with r2?

Driaz · 01-30-2011, 07:53 PM

Quote:

Originally Posted by gtriever

Thanks go out to volwrath for the heads up on r2.

After several hours of running the 1.1 Pre-Root, I started experiencing some odd behavior. A quick reflash with the r2 release seems to have solved everything. In fact, the NC seems a bit more responsive than it was on the 1.0.1 release.

I never tried r1, only used r2 last night with great success. Hopefully r2 worked for volwrath too.

rogerperk · 01-30-2011, 09:07 PM

Quote:

Originally Posted by SCION

Did you put it in /system/app. It automatically goes into /data/app. You have to move it if you want to select it with NOOKcolor Tools.

Of course. I am using ES File Explorer so I hope I can do it with that.

volwrath · 01-31-2011, 09:44 AM

Quote:

Originally Posted by Driaz

Bummer....I wonder why some have no problems and others have so many? It seems that coming from the same software version should have similar results, but not so.

Did you have better luck with r2?

No actually same problems exist. They are minor, but since my nandroid restore a)bricked my nc the first time and b) had a md5 mismatch the second time I think I will stick to 1.1 for a bit

rogerperk · 01-31-2011, 02:26 PM

Quote:

Originally Posted by rogerperk

Of course. I am using ES File Explorer so I hope I can do it with that.

It doesn't show anywhere on ES File Explorer, card or device. Anyone know what the program name is? I see everything else but that but I can access it and such. Its there somewhere!

01-30-2011, 12:30 PM	#49
emt Nameless Being	Running 1.1 and 1.1 GHz Screamer Everything works very nicely if you use SetCPU - my observations: ************************************************ ******** I updated to Dolphin HD 4.3 - Pinch/Zoom does not work well - just as well since I don't really like Dolphin so I'm going to try either stock or XScope - any advice will be appreciated ********************************************** ** This 1100 MHz kernel is really faster IMHO ********************************************** ** SetCPU settings per XDA as follows General is min 600 MHz, max 1100 MHz, ondemand, set on boot Battery off is max 600 MHz, min 300 MHz, ondemand, set on boot Advanced is sampling 150000 ********************************************** ***** Last book read icon works perfectly! ********************************************** ***** Initial screen sensitivity was awful but on one or two reboots, it is now flawless and nicely sensitive - apps pop right up much faster than before. ********************************************** ******* New market is sized properly for screen - all buttons show perfectly ********************************************** ***** Button Savior no longer works (except the Home Button does work) Last edited by emt; 01-30-2011 at 12:50 PM. Reason: Forgot Something

01-30-2011, 02:19 PM	#51
PegS Connoisseur Posts: 83 Karma: 345 Join Date: Dec 2010 Device: NOOKcolor	Huh, Button Savior seems to work the same for me. Glad I dodged that one! I'm noticing that Ultra Keyboard doesn't stay installed after a reboot. I have to go back, find the apk, re-install it, and re-choose it as my default keyboard. Is anyone having that problem with SlideIt, etc.? Also, when I charge the NC, the light on the cord doesn't turn to green when fully charged. This was an issue I had when I first did the faux build.prop. I know it's not the cord itself because it still works for my husband's NC. ETA: Okay, I just manually deleted the apk and reinstalled it from the new Market. It seems to have stuck after rebooting this time, so we'll see. However, No Lock isn't sticking after rebooting, and that's one that wasn't sideloaded originally. Last edited by PegS; 01-30-2011 at 02:27 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rooted Nook with 2.5.1	Care	Nook Developer's Corner	4	12-03-2010 01:43 PM
How can I update creation time for a title when I update the book info or convert it	setherd	Calibre	3	10-30-2010 02:51 PM
Firmware Update Can I reinstall the official amazon update after the update file from this site ?	yuenslhk	Amazon Kindle	2	06-20-2010 12:24 PM
Update on Google eBook Sales Plan Update	poohbear_nc	News	6	05-05-2010 10:00 AM
PRS-500 What file to change to re-update reader with latest update?	pitolee	Sony Reader Dev Corner	2	05-25-2007 12:56 AM

01-30-2011, 03:51 AM	#46
Driaz Next Big Nothing Posts: 11 Karma: 10 Join Date: Dec 2010 Location: Tucson, AZ Device: nook, nook color(rooted)	Success going from 1.0.1 autonootered (not the latest version, I rooted a couple days before the last release) to 1.1.0 via this method. I have not had any issues at all. I think those that have had problems are using this method from rooted 1.0.0. I'll have to go to BN tomorrow and see if read in store works.... ....I've never actually read in store, but for those expiring library books, might as well finish the book for free in BN....

01-30-2011, 06:27 AM	#47
gtriever Addict Posts: 286 Karma: 2125576 Join Date: Sep 2010 Device: Kobo Forma	Thanks go out to volwrath for the heads up on r2. After several hours of running the 1.1 Pre-Root, I started experiencing some odd behavior. A quick reflash with the r2 release seems to have solved everything. In fact, the NC seems a bit more responsive than it was on the 1.0.1 release.

01-30-2011, 05:10 PM	#53
aagstn Evangelist Posts: 422 Karma: 1004351 Join Date: Jun 2007 Device: Kindle Paperwhite 3, iPad mini 2	I gave up the rooting and just went back to the stock 1.1. I'm honestly fine with the built in web browser now and most of the apps I had downloaded were for things I can bring up in the web browser. I may root again down the road, but first I want to see the app options B&N gives us. I'm very happy with the 1.1 update, though I still have books that don't show the covers. I wish I could figure that one out since many of my books show covers that didn't before the 1.1 update.