Freda - ebook reader program for Windows Mobile - Page 25

Jim Chapman · 07-21-2010, 02:39 AM

Quote:

Originally Posted by starrigger

Just a quick note to say that I've been using the release version of 2.0 and it seems to be working very well. I had a few glitches right after installing, but they haven't repeated.

Oh--I remember one thing--for some reason there were book entries in the library for a couple of titles, but no actual book files. Freda didn't like that, and crashed. Took a few times before I figured out the problem.

Thanks for the report. I'm not sure how Freda could get into a state where it has library entries for non-existent book files - but I'll look into it, and at least make sure that in that case Freda (1) tidies up the library (2) doesn't crash.

Houndx · 07-21-2010, 10:01 PM

I just checked out the latest WinCE build and I love it! It's surpassed AlReader as my favorite reading software.

I'd like to make one suggestion/request. The option to show the remaining battery percentage at the bottom. WinCE devices don't have a meter on the status bar so seeing this inside the reader is a HUGE convenience.

Thanks again for the awesome software!

DarkJoker · 07-22-2010, 06:59 AM

Apptodate support in Freda 2.0

Hi Jim,
you did a fantastic job with Freda 2.0. It's one of the best ebook reader programs I know (and I use a lot of them).

You introduced apptodate support in Freda 1.0, which I used sometimes. Apptodate was unable to update Freda 1.1 to Freda 2.0 (what IMHO is OK for a new major release), but I'd like to know if you are going to support apptodate with the 2.0 release line for minor fixes.

many thanks for your work

DarkJoker · 07-22-2010, 07:14 AM

Strange x-mas tree formatting in "Eternity's End"

Hi Jim,

I noticed a change in formatting after updating from Freda 1.1 to Freda 2.0. I like the books from starrigger, and his "Eternity's End" novel looks strange in Freda 2.0. I'm only able to get a centered formatting of this book - independent of the setting "Force alignment". I can't remember the settings I had for this book in Freda 1, but it definitely looked better. Is there something I'm missing? You can find the book at starriggers site.

many thanks in advance

Jim Chapman · 07-22-2010, 07:28 AM

Quote:

Originally Posted by DarkJoker

Strange x-mas tree formatting in "Eternity's End"

Odd. I am looking into it.

emai7s2 · 07-23-2010, 05:35 AM

Quote:

Originally Posted by Jim Chapman

Freda v2 is now ready for general release.

I deleted Freda v. 1.1 from my Dell Axim X50v running WM2003SE and then installed Freda version 2.0. Version 2 won't even launch on my Axim - I just get a series of error messages.

I then deleted v. 2.0 and reinstalled v. 1.1, and everything seems to work fine again.

Jim Chapman · 07-23-2010, 06:27 AM

Quote:

Originally Posted by emai7s2

Version 2 won't even launch on my Axim - I just get a series of error messages.

My guess is that this is because you need an updated version of the .Net Compact Framework on your Axim (if you can give more detail about the errors messages, I can verify that suspicion). v1.1 of Freda would work with version 2 of the .NetCF, but v2.0 needs version 3.5 of the .NetCF.
The solution is: look on Microsoft's website for ".Net Compact Framework Redistributable". Follow the link to download and install version 3.5. Try running Freda 2.0 again.

starrigger · 07-23-2010, 04:02 PM

Quote:

Originally Posted by DarkJoker

Strange x-mas tree formatting in "Eternity's End"

Hi Jim,

I noticed a change in formatting after updating from Freda 1.1 to Freda 2.0. I like the books from starrigger, and his "Eternity's End" novel looks strange in Freda 2.0. I'm only able to get a centered formatting of this book - independent of the setting "Force alignment". I can't remember the settings I had for this book in Freda 1, but it definitely looked better. Is there something I'm missing? You can find the book at starriggers site.

many thanks in advance

Hm. Maybe I should take a look at that, too.

Yes, I see what you mean. I have Freda set to force left alignment, but Eternity's End still displays with everything centered.

It looks correct in the Calibre viewer, for what that's worth. And thanks, DarkJoker, for bringing it to our attention!

starrigger · 08-29-2010, 03:05 PM

Jim -- I don't remember if this issue has been raised already or not. I've got some stuff I recently acquired in epub, and it displays fine in both ADE and in Calibre viewer. But Freda squishes out all the blank line spaces and crams the text together. Is this an issue you're already working on? I can email you an example, if you like.

Thanks.

Jim Chapman · 08-31-2010, 05:23 AM

Quote:

Originally Posted by starrigger

Jim -- I don't remember if this issue has been raised already or not. I've got some stuff I recently acquired in epub, and it displays fine in both ADE and in Calibre viewer. But Freda squishes out all the blank line spaces and crams the text together. Is this an issue you're already working on? I can email you an example, if you like.

Thanks.

No I am not aware of that issue with Freda. Possibly it might be a CSS (style sheet) issue - the default Freda setup will ignore all but the first 100 rules in a style sheet, to avoid performance issues. You can override this behaviour by changing the 'Max rulesets in stylesheet' setting ('0' means 'read the whole style sheet, no matter how long it is').

In any case, please email me an example (home@jim-chapman.net) and I will take a look. It may take me a while, as my top priority just now is to be ready with the Windows Phone 7 build in time for the WP7 launch in October ...

jacka123 · 09-10-2010, 08:58 AM

Jim, your epub reader looks grate, however, why I cannot download the cab file, it reported that the link has been lost.

Jim Chapman · 09-10-2010, 05:42 PM

Quote:

Originally Posted by jacka123

Jim, your epub reader looks grate, however, why I cannot download the cab file, it reported that the link has been lost.

I just checked, and it looks like the links (at least the Dropbox) ones on http://www.turnip.demon.co.uk/jim/fr...l/download.htm are working at the moment. Please let me know if you're still having problems.

jacka123 · 09-19-2010, 11:49 PM

Hi JIm, I have got the Freda V2.0 and tried it out, it is perfect within the reader after doing some correct settings. however, I encountered some difficulties when lookup words using the dictionary POWERWORD: first the new word wouldn't past into the lookup window automaticly; second it seems that it wouldn't return to the reader from the DIC. It will open and load the dic as a new application into the memery and the dic. window disappearers in a split second or even wouldn't turn out any more while lookup a new word again. So could you please look into this and make the reader to send a copy of the new word to the clip board which allow it to be quoted by other application smoothly. Thanks.

jacka123 · 09-19-2010, 11:58 PM

One more quesiton. How to set the Library appearance like this illustration below:

Bald Eagle · 09-25-2010, 05:16 AM

Hello Jim,

I'm trying to read 'Grantville Gazette 31' on my HD2. There pops up a message saying "Trying to recover memory..." which went away after a short while in the first story. It does not so in the second (Lion's Tower), obscuring the upper part of the screen which somewhat detracts from the reading experience.
Is there an option to turn it off?
I'm using Freda 2.0 build 104.

Thanks
Eagle

09-19-2010, 11:58 PM	#374
jacka123 Junior Member Posts: 3 Karma: 10 Join Date: Sep 2010 Device: Hp212	One more quesiton. How to set the Library appearance like this illustration below: Last edited by jacka123; 09-28-2010 at 11:29 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Freda Ebook Reader for Windows and Android	Jim Chapman	Reading and Management	140	08-05-2024 05:30 AM
Freda Ebook Reader now available as a Windows 10 Univeral App	Jim Chapman	Windows Devices	7	05-02-2016 03:59 PM
Freda ebook software for Windows Mobile release version 1.	pilotbob	News	5	12-13-2009 09:32 AM

07-21-2010, 10:01 PM	#362
Houndx Groupie Posts: 159 Karma: 149 Join Date: Jul 2009 Device: A81 MID, Dell Streak	I just checked out the latest WinCE build and I love it! It's surpassed AlReader as my favorite reading software. I'd like to make one suggestion/request. The option to show the remaining battery percentage at the bottom. WinCE devices don't have a meter on the status bar so seeing this inside the reader is a HUGE convenience. Thanks again for the awesome software!

07-22-2010, 06:59 AM	#363
DarkJoker Junior Member Posts: 3 Karma: 10 Join Date: Jan 2010 Device: HTC HD2	Apptodate support in Freda 2.0 Hi Jim, you did a fantastic job with Freda 2.0. It's one of the best ebook reader programs I know (and I use a lot of them). You introduced apptodate support in Freda 1.0, which I used sometimes. Apptodate was unable to update Freda 1.1 to Freda 2.0 (what IMHO is OK for a new major release), but I'd like to know if you are going to support apptodate with the 2.0 release line for minor fixes. many thanks for your work

07-22-2010, 07:14 AM	#364
DarkJoker Junior Member Posts: 3 Karma: 10 Join Date: Jan 2010 Device: HTC HD2	Strange x-mas tree formatting in "Eternity's End" Hi Jim, I noticed a change in formatting after updating from Freda 1.1 to Freda 2.0. I like the books from starrigger, and his "Eternity's End" novel looks strange in Freda 2.0. I'm only able to get a centered formatting of this book - independent of the setting "Force alignment". I can't remember the settings I had for this book in Freda 1, but it definitely looked better. Is there something I'm missing? You can find the book at starriggers site. many thanks in advance

08-29-2010, 03:05 PM	#369
starrigger Jeffrey A. Carver Posts: 1,355 Karma: 1107383 Join Date: Aug 2008 Location: Massachusetts, USA Device: Lenovo Yoga Tab Plus, Droid phone, Nook HD+	Jim -- I don't remember if this issue has been raised already or not. I've got some stuff I recently acquired in epub, and it displays fine in both ADE and in Calibre viewer. But Freda squishes out all the blank line spaces and crams the text together. Is this an issue you're already working on? I can email you an example, if you like. Thanks.

09-10-2010, 08:58 AM	#371
jacka123 Junior Member Posts: 3 Karma: 10 Join Date: Sep 2010 Device: Hp212	Jim, your epub reader looks grate, however, why I cannot download the cab file, it reported that the link has been lost.

09-19-2010, 11:49 PM	#373
jacka123 Junior Member Posts: 3 Karma: 10 Join Date: Sep 2010 Device: Hp212	Hi JIm, I have got the Freda V2.0 and tried it out, it is perfect within the reader after doing some correct settings. however, I encountered some difficulties when lookup words using the dictionary POWERWORD: first the new word wouldn't past into the lookup window automaticly; second it seems that it wouldn't return to the reader from the DIC. It will open and load the dic as a new application into the memery and the dic. window disappearers in a split second or even wouldn't turn out any more while lookup a new word again. So could you please look into this and make the reader to send a copy of the new word to the clip board which allow it to be quoted by other application smoothly. Thanks.

09-25-2010, 05:16 AM	#375
Bald Eagle Connoisseur Posts: 93 Karma: 1228255 Join Date: May 2009 Device: Aura H2O, Aura One, Libra Colour	Hello Jim, I'm trying to read 'Grantville Gazette 31' on my HD2. There pops up a message saying "Trying to recover memory..." which went away after a short while in the first story. It does not so in the second (Lion's Tower), obscuring the upper part of the screen which somewhat detracts from the reading experience. Is there an option to turn it off? I'm using Freda 2.0 build 104. Thanks Eagle

Advert

Advert