PRS+: Enhanced firmware for Sony Reader, Folders, Games & more - Page 123

kartu · 03-16-2011, 04:59 PM

Quote:

Originally Posted by Bob in Alberta

Back button seemed to work - maybe I can be the cover picture when you do the Dummy's guide to PRS300 upgrading?

Nah, it wasn't you but rather unlucky coincidence. I'll have to rework installer for 300 for such situations, when rootfs needs to be reflashed.

Bob in Alberta · 03-16-2011, 05:37 PM

One hopefully last question. Do I now delete the installer folder? I've tried turning the reader off and on a couple of times and it has come on with the choice of language to install screen at least once.

kartu · 03-16-2011, 05:58 PM

Quote:

Originally Posted by Bob in Alberta

One hopefully last question. Do I now delete the installer folder? I've tried turning the reader off and on a couple of times and it has come on with the choice of language to install screen at least once.

1) Settings -> Advanced Settings -> Shutdown
2) Switch on and immediately connect to USB
3) Delete mentioned folder

theomeier · 03-16-2011, 07:00 PM

Problem with PRS-950/ PRSlus alpha 2.0.1.0 installer firmware installation: missing folder structure and config-files for installation of alternative epub font.

I would like to install alternative fonts. The required database\system\.... folder however does not exist and I also cannot find a configuration files. Will the font installation instruction as described in the WIKI work if I just create the missing folder structure ? Where do I get the config files ?

Bob in Alberta · 03-16-2011, 07:31 PM

Thanks for all of the help. Everything looks good so I'll try to go away and stop bugging you.

qhlixpfh · 03-16-2011, 09:05 PM

Excuse me, kartu, I have a question to ask.
I have a PRS-950, and I installed boroda's CFW, version 1.05m, can I use the old "PRSP_x50_Launcher_boroda" to install PRS+ 2.0.10alpha?

kartu · 03-17-2011, 03:27 AM

Quote:

Originally Posted by theomeier

Will the font installation instruction as described in the WIKI work if I just create the missing folder structure ?

Yes.

Quote:

Where do I get the config files ?

http://prs-plus.googlecode.com/hg/in...ntsAsInLRF.css
http://prs-plus.googlecode.com/hg/in...ers.cfg.sample

Quote:

Originally Posted by qhlixpfh

Excuse me, kartu, I have a question to ask.
I have a PRS-950, and I installed boroda's CFW, version 1.05m, can I use the old "PRSP_x50_Launcher_boroda" to install PRS+ 2.0.10alpha?

Yes you can, if installing "manually" (i.. unpack PRSPInstaller etc). If you use ...setup.exe boroda's firmware will get overwritten with PRS+. (among other changes it will change custom epub style path, from /epub to /database/system/PRSPlus/epub)

MiK77 · 03-17-2011, 04:45 AM

I've completed the German translation, but I'm unsure about some texts. Who did the current translation and how can I contact him?

kartu · 03-17-2011, 04:53 AM

Translator: Duglum, klawong, Mark Nord

All registered on this forum.

MiK77 · 03-17-2011, 05:53 AM

The last translations seem to be from "SomeDeepBlue". But this name is not found in this forum. So I contacted Mark Nord first.

qhlixpfh · 03-17-2011, 08:30 AM

Thanks for your help, kartu. Now I known how to deal with it.

noxx · 03-17-2011, 12:24 PM

i found this Bugs in 2.0.10

- Buttonsetting / Other Buttons
---> i miss the setup for the Button NEXT and PREV (only Home/Menu/Zoom there)

- German Translation

kartu · 03-17-2011, 02:46 PM

Missing next/prev events is not a bug.
Yes, translations need fixes, will be done during beta test, too yearly to do it now.

joe996 · 03-17-2011, 02:47 PM

i installed prs+ for 650 with the installer. after that i tried to config the css files for epub fonts, but i don't have a /database/system folder.
is this intended?

kartu · 03-17-2011, 02:53 PM

Quote:

Originally Posted by joe996

i installed prs+ for 650 with the installer. after that i tried to config the css files for epub fonts, but i don't have a /database/system folder.
is this intended?

Yes, it's intended, unless you've used ...setup.exe. The stuff in system folder is optional. What's copied there are sample files.
Check this post.

03-16-2011, 07:00 PM	#1834
theomeier Junior Member Posts: 8 Karma: 10 Join Date: Sep 2008 Device: Sony PRS-950	alpha 2.0.1.0 installer: not system folder for installation of alternative epub font Problem with PRS-950/ PRSlus alpha 2.0.1.0 installer firmware installation: missing folder structure and config-files for installation of alternative epub font. I would like to install alternative fonts. The required database\system\.... folder however does not exist and I also cannot find a configuration files. Will the font installation instruction as described in the WIKI work if I just create the missing folder structure ? Where do I get the config files ? Last edited by theomeier; 03-17-2011 at 02:36 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using HD Folders as Collections on Sony PRS-505	fglaysher	Calibre	8	07-26-2010 09:55 PM
Enhanced Firmware for V3	keng2000	HanLin eBook	12	04-12-2010 09:30 AM
Poll: Sony Reader PRS-505 upgrade to Sony PRS-700	Kris777	Sony Reader	70	02-18-2009 06:34 PM
Sony Reader PRS-505 upgrade to Sony PRS-700	Kris777	Sony Reader	23	12-08-2008 06:56 AM
Sub folders in firmware v1.08	Prince Hal	Amazon Kindle	28	10-23-2008 03:20 PM

03-16-2011, 05:37 PM	#1832
Bob in Alberta Member Posts: 18 Karma: 10 Join Date: Aug 2010 Device: Sony PRS-300	One hopefully last question. Do I now delete the installer folder? I've tried turning the reader off and on a couple of times and it has come on with the choice of language to install screen at least once.

03-16-2011, 07:31 PM	#1835
Bob in Alberta Member Posts: 18 Karma: 10 Join Date: Aug 2010 Device: Sony PRS-300	Thanks for all of the help. Everything looks good so I'll try to go away and stop bugging you.

03-16-2011, 09:05 PM	#1836
qhlixpfh Junior Member Posts: 2 Karma: 10 Join Date: Nov 2010 Device: prs 950	Excuse me, kartu, I have a question to ask. I have a PRS-950, and I installed boroda's CFW, version 1.05m, can I use the old "PRSP_x50_Launcher_boroda" to install PRS+ 2.0.10alpha?

03-17-2011, 04:45 AM	#1838
MiK77 Enthusiast Posts: 49 Karma: 638 Join Date: Mar 2011 Device: Sony PRS 650	I've completed the German translation, but I'm unsure about some texts. Who did the current translation and how can I contact him?

03-17-2011, 04:53 AM	#1839
kartu PRS+ author Posts: 1,637 Karma: 2446233 Join Date: Dec 2007 Device: Sony PRS-300, 505, 600, 650, 950	Translator: Duglum, klawong, Mark Nord All registered on this forum.

03-17-2011, 05:53 AM	#1840
MiK77 Enthusiast Posts: 49 Karma: 638 Join Date: Mar 2011 Device: Sony PRS 650	The last translations seem to be from "SomeDeepBlue". But this name is not found in this forum. So I contacted Mark Nord first.

03-17-2011, 08:30 AM	#1841
qhlixpfh Junior Member Posts: 2 Karma: 10 Join Date: Nov 2010 Device: prs 950	Thanks for your help, kartu. Now I known how to deal with it.

03-17-2011, 12:24 PM	#1842
noxx Enthusiast Posts: 42 Karma: 36 Join Date: Dec 2010 Location: germany Device: Sony PRS-650	i found this Bugs in 2.0.10 - Buttonsetting / Other Buttons ---> i miss the setup for the Button NEXT and PREV (only Home/Menu/Zoom there) - German Translation

03-17-2011, 02:46 PM	#1843
kartu PRS+ author Posts: 1,637 Karma: 2446233 Join Date: Dec 2007 Device: Sony PRS-300, 505, 600, 650, 950	Missing next/prev events is not a bug. Yes, translations need fixes, will be done during beta test, too yearly to do it now.

03-17-2011, 02:47 PM	#1844
joe996 Junior Member Posts: 9 Karma: 10 Join Date: Oct 2010 Device: PRS-650	i installed prs+ for 650 with the installer. after that i tried to config the css files for epub fonts, but i don't have a /database/system folder. is this intended?

Advert

Advert