Accessories ALL ABOUT COVERS!!! Welcome New Kindle Owners! Ask your Cover questions here! - Page 23

mysteryoustrvlr · 03-04-2011, 12:22 PM

Thank you Kindle Kitten! I am having a lot of fun just browsing and reading! I am sure I will find many excellent resources here!

Quote:

Originally Posted by kindlekitten

welcome to the forums Ivy!

if a pattern exists I am willing to bet that one of our intrepid members will discover it!

kindlekitten · 03-04-2011, 01:18 PM

Quote:

Originally Posted by mysteryoustrvlr

Thank you Kindle Kitten! I am having a lot of fun just browsing and reading! I am sure I will find many excellent resources here!

enjoy! and please ask any questions!

Yolina · 03-05-2011, 10:10 AM

mysteryoustrvlr: you could always try and make your own pattern if you can't find one

probably way beyond my abilities to be honest! While I was deciding which Oberon cover to get (and then waited for it to arrive via a friend in NY) I made a quick DIY sleeve with some bubble wrap, strong cardboard and tape, then (badly) sewed a fabric envelope and asked my mum to embroider it in colours matching the skin on my Kindle

Scarpad · 03-06-2011, 11:18 PM

Quote:

Originally Posted by txoof

Ahh yes, from what I can tell from the interwebs and the amazon pages, the K3 covers without lights had a chintzy powder coat on the clips that wore off and eventually created a short across the power ports. This drained the battery and caused all sorts of problems.
The lighted cover do not appear to have this problem as the clips drain through the light as they should.

Which cover was this I wonder if this caused my screen to go defective?

Pushka · 03-06-2011, 11:36 PM

I have just received the MEdge Jacket with the new mounted system and I love it. The kindle is very firmly held in place, and the mounting system just disappears. It gives a great clean look to the kindle as I really do not like anything with straps. I dont mind the hinge system, but this new mounting system really works for me. Now, they need to improve their colour selection, and if this is available for the new "design your own" covers, I am going to be first in line to buy. Highly recommend this new mounting system.

kranu · 03-07-2011, 12:35 AM

Quote:

Originally Posted by Pushka

I have just received the MEdge Jacket with the new mounted system and I love it. The kindle is very firmly held in place, and the mounting system just disappears. It gives a great clean look to the kindle as I really do not like anything with straps. I dont mind the hinge system, but this new mounting system really works for me. Now, they need to improve their colour selection, and if this is available for the new "design your own" covers, I am going to be first in line to buy. Highly recommend this new mounting system.

Are you talking about the M-Edge Latitude with a Molded Mounting System? If so, I'm glad you like it

I've been wanting one for a while, but I want to wait until they sell it on Amazon because of their trusty customer support.

Pushka · 03-07-2011, 06:44 AM

Quote:

Originally Posted by kranu

Are you talking about the M-Edge Latitude with a Molded Mounting System? If so, I'm glad you like it

I've been wanting one for a while, but I want to wait until they sell it on Amazon because of their trusty customer support.

yes, that's the one. The kindle fits inside very snugly and I am really happy with it.

ProfCrash · 03-07-2011, 09:59 AM

I believe that MEdge has zippered cases and Patagonia. There are some hand made covers on ecty (I know I have that wrong but am hoping others know what I am talking about and correct it) that are zippered.

kindlekitten · 03-07-2011, 05:25 PM

that's a lovely case! is the front cover padded at all?

PG4003 · 03-08-2011, 02:41 PM

Quote:

Originally Posted by mysteryoustrvlr

Hi All,

Just became a new Kindle 3 owner and am miffed at the lack of decent covers out there for this wonderful device.

I was hoping to find a pattern so I can customize one for myself. Does anyone know if a pattern exists for a zippered case pattern? The kind that is similar to zippered book covers they made for paperback books back in the day. You could zip open the cover and read your book with the cover still on and when you were done, bookmarked it and zipped it back up. It protected your book when the case was closed.

Hoping to make one like this for my Kindle and wondering if there was a pattern out there anyone can point me to?

Thank you!
Ivy

Ivy, I make several different Kindle cases/covers and I've yet to find a pattern for one that zips all the way around. On About.com there are instructions to make a Bible cover that zips around, maybe could be adapted for a Kindle, but it's not really what I'm looking for. M-edge sells some cases that zip like that and can be folded back for reading, have you looked at them?

bitsandpieces · 03-11-2011, 02:39 AM

I too got a custom cover made here in India. kindle original cover seemed way too expensive to me, plus it didnt fold back easily, so was a pain to use too.

Tried out getting a kindle cover from dealextreme, in hope that it might be better. but still that wasn't kinda satisfactory as the inside material was kinda velvetly which i didnt seem to like much, plus it was rexin and not real leather on the outside. Kinda has a cheapo feel to it.

So went around Kolkata, sourced a bit of leather, and handed over to a local guy my original kindle cover + the leather.

The first attempt he made something that didnt work out, but second one was prety good job. here are the pics

[Images violate posting guidelines for size - MODERATOR]

(The pebble grain finish cover is the original amazon leather cover, the other one is the one locally made. Just had both in frame for comparisions.)

I couldn't source the pebble grain leather used for kindle cover, so got the local plain black ones and added a thin sponge layer between the leather and the board.

used four corner straps to hold it in place. They were made a bit thicker, which causes it to cover the unlock switch and the navipad key, but well, I felt that was better than using a thin strap and risking the kindle falling out.

the original kindle cover wouldn't fold back easily, so opted to have no board on the side, to allow easily folding back of front cover.

And the bottom line, all this cost me about 12-14 dollars to make using real leather

Kinetikat · 03-13-2011, 03:44 AM

I bought myself a Kindle 3, and ordered a DecalGirl skin for it, then realised with dismay that all the covers I fancied - the Tuff-Luv Antique, for instance - would almost completely obscure the gorgeous skin if I left the Kindle in the case when using it, which is kind of the idea with that 'book-type' case.

I havered madly for a week, torn between unsatisfying alternatives, and in the meantime, I kept my Kindle in an A5 Jiffy Bag-type postal envelope padded with bubble wrap and fastened with a small bulldog clip at the top.
I spent a few days experimenting with the whole cut-a-hole-in-a-book DIY approach, but didn't like the results, though someone with more patience could make a fabulous hard cover from one of the PaperBlanks notebooks. Those things are lush!
Then, gradually, light began to dawn.

I spotted a crystal case made by Tuff-Luv which would allow the full glory of my DecalGirl skin to shine through (it's the 'Before the Storm' one, if anybody wants to know), and ordered it. It arrived neck and neck with the skin, and I decorated and protected my lovely Kindle in one satisfying half hour. I really can recommend the Decalgirl skins, they're astoundingly easy to use, and truly are repositionable even after being rubbed down, with a bit of care.
So I looked at my little post-bag Kindle case, and thought, well, why not? So off I went to the local charity shops (thrift shops to you US Kindlers) to find a garment or two I could cut up and use to decorate the envelope. One chenille jumper (sweater) and a silk/viscose shell top later, and I was in business. As I am sans sewing machine at the moment, I had to do a bit of hand sewing, which with my skills means that things are a tad clunky and imprecise in places, but I basically sewed an envelope-sized, er, envelope from the jumper, stuck double-sided tape all over the outside of the postal envelope, inserted it into its woolly sleeve and pressed it all down to my satisfaction. Then made a 'flap' from the exuberantly-bobbly collar of the jumper, lined it with the orange-red silky viscose (a bit more hand sewing, and in hindsight, I should have inserted some stiffening, maybe even the original card envelope flap), and used my hot glue gun to stick it to the back panel of the woolly sleeve (I had had my fill of sewing at this point).
I braided some canvas-work wool in toning colours to make a loop, and sewed it to the flap. Covered the attachment point with a little brass button I had in my box with 'Ladybird' written on it - thought that was a nice touch, as Ladybird Books are well-loved children's books here in the UK - and added a horn toggle to finish the fastening. Another time, I might go for an elasticated loop. I may yet add a couple more buttons to disguise the slightly improvised top corner glueing, and perhaps a line of braid or ribbon across the top with a carrying loop or something.
But on the whole I am very happy with how my Kindle Cardi (TM... or soon will be!) has turned out. Pictures attached! (The first photo is closer to the actual colouring, as I used flash)

kindlekitten · 03-13-2011, 08:33 AM

very creative!

welcome to the forums!

PG4003 · 03-13-2011, 09:02 AM

Kinetikat, you should be proud! I love it when people are so creative in coming up with a cover or case that is uniquely theirs. Good job!

FF2 · 03-13-2011, 11:32 AM

Kinetikat:

Very well-done.

My only concern with cases with "buttons" (bone fragment or tooth) is that they can present a pressure point against the screen if placed in another carrying case like an attache case or backpack.

03-05-2011, 10:10 AM	#333
Yolina Wizard Posts: 1,179 Karma: 11573197 Join Date: Feb 2011 Location: London, UK Device: Voyage	mysteryoustrvlr: you could always try and make your own pattern if you can't find one probably way beyond my abilities to be honest! While I was deciding which Oberon cover to get (and then waited for it to arrive via a friend in NY) I made a quick DIY sleeve with some bubble wrap, strong cardboard and tape, then (badly) sewed a fabric envelope and asked my mum to embroider it in colours matching the skin on my Kindle Attached Thumbnails

03-11-2011, 02:39 AM	#341
bitsandpieces Member Posts: 13 Karma: 18 Join Date: Jan 2011 Location: Bangalore Device: Kindle Touch, paperwhite	I too got a custom cover made here in India. kindle original cover seemed way too expensive to me, plus it didnt fold back easily, so was a pain to use too. Tried out getting a kindle cover from dealextreme, in hope that it might be better. but still that wasn't kinda satisfactory as the inside material was kinda velvetly which i didnt seem to like much, plus it was rexin and not real leather on the outside. Kinda has a cheapo feel to it. So went around Kolkata, sourced a bit of leather, and handed over to a local guy my original kindle cover + the leather. The first attempt he made something that didnt work out, but second one was prety good job. here are the pics [Images violate posting guidelines for size - MODERATOR] (The pebble grain finish cover is the original amazon leather cover, the other one is the one locally made. Just had both in frame for comparisions.) I couldn't source the pebble grain leather used for kindle cover, so got the local plain black ones and added a thin sponge layer between the leather and the board. used four corner straps to hold it in place. They were made a bit thicker, which causes it to cover the unlock switch and the navipad key, but well, I felt that was better than using a thin strap and risking the kindle falling out. the original kindle cover wouldn't fold back easily, so opted to have no board on the side, to allow easily folding back of front cover. And the bottom line, all this cost me about 12-14 dollars to make using real leather Last edited by Dr. Drib; 02-01-2015 at 05:19 PM.

03-13-2011, 03:44 AM	#342
Kinetikat Junior Member Posts: 5 Karma: 10 Join Date: Mar 2011 Location: Northumberland, UK Device: Kindle 3 UK	Kindle Cover Dilemmas! I bought myself a Kindle 3, and ordered a DecalGirl skin for it, then realised with dismay that all the covers I fancied - the Tuff-Luv Antique, for instance - would almost completely obscure the gorgeous skin if I left the Kindle in the case when using it, which is kind of the idea with that 'book-type' case. I havered madly for a week, torn between unsatisfying alternatives, and in the meantime, I kept my Kindle in an A5 Jiffy Bag-type postal envelope padded with bubble wrap and fastened with a small bulldog clip at the top. I spent a few days experimenting with the whole cut-a-hole-in-a-book DIY approach, but didn't like the results, though someone with more patience could make a fabulous hard cover from one of the PaperBlanks notebooks. Those things are lush! Then, gradually, light began to dawn. I spotted a crystal case made by Tuff-Luv which would allow the full glory of my DecalGirl skin to shine through (it's the 'Before the Storm' one, if anybody wants to know), and ordered it. It arrived neck and neck with the skin, and I decorated and protected my lovely Kindle in one satisfying half hour. I really can recommend the Decalgirl skins, they're astoundingly easy to use, and truly are repositionable even after being rubbed down, with a bit of care. So I looked at my little post-bag Kindle case, and thought, well, why not? So off I went to the local charity shops (thrift shops to you US Kindlers) to find a garment or two I could cut up and use to decorate the envelope. One chenille jumper (sweater) and a silk/viscose shell top later, and I was in business. As I am sans sewing machine at the moment, I had to do a bit of hand sewing, which with my skills means that things are a tad clunky and imprecise in places, but I basically sewed an envelope-sized, er, envelope from the jumper, stuck double-sided tape all over the outside of the postal envelope, inserted it into its woolly sleeve and pressed it all down to my satisfaction. Then made a 'flap' from the exuberantly-bobbly collar of the jumper, lined it with the orange-red silky viscose (a bit more hand sewing, and in hindsight, I should have inserted some stiffening, maybe even the original card envelope flap), and used my hot glue gun to stick it to the back panel of the woolly sleeve (I had had my fill of sewing at this point). I braided some canvas-work wool in toning colours to make a loop, and sewed it to the flap. Covered the attachment point with a little brass button I had in my box with 'Ladybird' written on it - thought that was a nice touch, as Ladybird Books are well-loved children's books here in the UK - and added a horn toggle to finish the fastening. Another time, I might go for an elasticated loop. I may yet add a couple more buttons to disguise the slightly improvised top corner glueing, and perhaps a line of braid or ribbon across the top with a carrying loop or something. But on the whole I am very happy with how my Kindle Cardi (TM... or soon will be!) has turned out. Pictures attached! (The first photo is closer to the actual colouring, as I used flash) Attached Thumbnails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Buy EOI: M-Edge covers for Sony 505/600 Aussie owners	ozron	Flea Market	2	04-04-2010 10:00 PM
Some questions for PB-301+ owners	Dodo	PocketBook	3	11-25-2009 10:40 PM
3 Questions to kindle 2 or DX owners?	TheMayan	Amazon Kindle	9	11-07-2009 07:22 AM
PRS-700 Owners, M-Edge Covers are on the way!	Andybaby	Sony Reader	63	05-17-2009 12:02 AM
Questions for new Iliad owners!	CommanderROR	iRex	388	08-02-2007 11:18 AM

03-06-2011, 11:36 PM	#335
Pushka Wizard Posts: 1,119 Karma: 1019140 Join Date: Oct 2009 Location: Australia Device: kindle, Ipad, Iphone, Nexus and PPW	I have just received the MEdge Jacket with the new mounted system and I love it. The kindle is very firmly held in place, and the mounting system just disappears. It gives a great clean look to the kindle as I really do not like anything with straps. I dont mind the hinge system, but this new mounting system really works for me. Now, they need to improve their colour selection, and if this is available for the new "design your own" covers, I am going to be first in line to buy. Highly recommend this new mounting system.

03-07-2011, 09:59 AM	#338
ProfCrash Tea Enthusiast Posts: 8,554 Karma: 75384937 Join Date: Jul 2010 Location: Somewhere in the USA Device: Kindle1, Kindle DX Graphite, K3 3G, IPad 3, PW2	I believe that MEdge has zippered cases and Patagonia. There are some hand made covers on ecty (I know I have that wrong but am hoping others know what I am talking about and correct it) that are zippered.

03-07-2011, 05:25 PM	#339
kindlekitten Professional Adventuress Posts: 13,368 Karma: 50260224 Join Date: Sep 2009 Location: The Olympic Peninsula on the OTHER Washington! (the big green clean one on the west coast!) Device: Kindle, the original! Times Two! and gifting an International Kindle	that's a lovely case! is the front cover padded at all?

03-13-2011, 08:33 AM	#343
kindlekitten Professional Adventuress Posts: 13,368 Karma: 50260224 Join Date: Sep 2009 Location: The Olympic Peninsula on the OTHER Washington! (the big green clean one on the west coast!) Device: Kindle, the original! Times Two! and gifting an International Kindle	very creative! welcome to the forums!

03-13-2011, 09:02 AM	#344
PG4003 Addict Posts: 381 Karma: 987250 Join Date: Mar 2010 Location: Kentucky Device: Kindle PW I & II, Kindle Voyage, Fire HD 7", Fire HD 8.9"	Kinetikat, you should be proud! I love it when people are so creative in coming up with a cover or case that is uniquely theirs. Good job!

03-13-2011, 11:32 AM	#345
FF2 Wizard Posts: 1,105 Karma: 1025784 Join Date: Oct 2010 Device: WiFi Kindle3	Kinetikat: Very well-done. My only concern with cases with "buttons" (bone fragment or tooth) is that they can present a pressure point against the screen if placed in another carrying case like an attache case or backpack.

Advert

Advert