Firmware 4.9.11311 - Page 7

lightbulbjim · 07-21-2018, 03:36 AM

My H2O2 mk1 (silly naming scheme) updated itself last night and I’m also not seeing the top margin bug. All I use are epubs but they’re working just fine...

Ansl · 07-21-2018, 05:53 AM

Another little fix with this fw is that the letter following a full stop is again a capital one by default. That and the improved search definitely mark this an update worth trying in my eyes ;-)

davidfor · 07-21-2018, 07:13 AM

Quote:

Originally Posted by Ansl

Another little fix with this fw is that the letter following a full stop is again a capital one by default.

What do you mean by this? Or where do you see this?

Ansl · 07-21-2018, 07:29 AM

Quote:

Originally Posted by davidfor

What do you mean by this? Or where do you see this?

I seem to have deleted arguably the most important part of my post... I was talking about annotations with text. I use those a lot and this has been annoying me, perhaps unreasonably so, in the last few releases.

GeoffR · 07-21-2018, 08:17 AM

Quote:

Originally Posted by Ripplinger

I'm not seeing that problem at all on the Glo HD, but then I have small line spacing and very little margins either on the top or the sides. Maybe it's some specific setting in an epub causing it that the 5 books I tried just doesn't have that setting? But I see no problem with the top margins in either epubs or kepubs.

There are normally two or three top 'margins' in ePubs, but I haven't installed this firmware and I don't know which one the bug affects. If someone could test and find out I would be very interested to know:

One is the @page margin set in the book's CSS stylesheet (or by one of the ePub top/bottom margin patches). If the bug affects this then on an unpatched device some books will be affected and others won't, depending on whether the publisher has set the @page margin.

The other 'margin' is actually a built-in 15px header at the top of the screen. This header is not present in full-screen mode, so if the bug affects this then it will only be seen in normal reading mode.

(There may also be a third top margin set in the book's XPGT stylesheet in some books, which could further complicate things.)

sashimimi · 07-22-2018, 06:16 AM

Quote:

Originally Posted by Ripplinger

I just installed it on my Glo HD and there's no problems at all that I can see. The fast page turns do work on the kepubs, but not on epubs. Searching brings up all entries within the book, not just the first 100 like it used to. Other than those 2 changes, I don't see anything else different, normal page turns don't seem to be any faster.

I don't know what the comments about the top navigation bar refer to, I don't see any issue. I do patch though, and especially love getting rid of the 3rd row on the home screen now. Thanks to the many people who always put in the time to give us these useful patches.

Which fw did you install on your Glo HD please ?

Ripplinger · 07-22-2018, 07:56 AM

Quote:

Originally Posted by sashimimi

Which fw did you install on your Glo HD please ?

I installed Firmware 4.9.11311. The Glo HD is a Mark 6 device.

ReaLx3m · 07-23-2018, 12:02 PM

Quote:

Originally Posted by oren64

It's only for devices:
Kobo Aura H2O Edition 2 v1 Mark 6
Kobo Aura ONE (not LE) Mark 6
Kobo Aura Edition 2 v1 Mark 6
Kobo Aura ONE LE Mark 6
Kobo Aura H2O Edition 2 v2 Mark 7
Kobo Aura Edition 2 v2 Mark 7
Clara HD Mark 7

Release Notes:

Download links:

Mark 4 firmware 4.9.11314 build number (8c2fd38797).
Mark 5 firmware 4.9.11314 build number (8c2fd38797).
Mark 6 firmware 4.9.11311 build number (112578920c).
Mark 7 firmware 4.9.11311 build number (112578920c).

*Mark 3 not available.

Im somewhat confused.On the wiki it says that the firmware is not compatible with the original H20, yet there is link for mark5 devices(which the h2o is).
So is it ok to flash the original h2o with the firmware from the mark5 link in your post?

oren64 · 07-23-2018, 12:39 PM

It doesn't say it not compatible it say "Not for...H2O", although firmware 4.9.11311 is not officially release to H2O, Mark 4 and Mark 5 are available to download.
Sometime Kobo release firmware marks that are not officially release to devises or that are planing to release officially on a latter day.

I didn't see any complaints about installing mark 4 or 5.

JSWolf · 07-23-2018, 02:43 PM

Quote:

Originally Posted by GeoffR

There are normally two or three top 'margins' in ePubs, but I haven't installed this firmware and I don't know which one the bug affects. If someone could test and find out I would be very interested to know:

One is the @page margin set in the book's CSS stylesheet (or by one of the ePub top/bottom margin patches). If the bug affects this then on an unpatched device some books will be affected and others won't, depending on whether the publisher has set the @page margin.

The other 'margin' is actually a built-in 15px header at the top of the screen. This header is not present in full-screen mode, so if the bug affects this then it will only be seen in normal reading mode.

(There may also be a third top margin set in the book's XPGT stylesheet in some books, which could further complicate things.)

There are hardly any new ePub eBooks these days that use an XPGT file. Also, of the ones that did that I've read, they did not set a top margin. They only set a left.right margin.

avresbo · 08-01-2018, 12:12 PM

Quote:

Originally Posted by oren64

It's only for devices:
Kobo Aura H2O Edition 2 v1 Mark 6
Kobo Aura ONE (not LE) Mark 6
Kobo Aura Edition 2 v1 Mark 6
Kobo Aura ONE LE Mark 6
Kobo Aura H2O Edition 2 v2 Mark 7
Kobo Aura Edition 2 v2 Mark 7
Clara HD Mark 7

Release Notes:

Download links:

Mark 4 firmware 4.9.11314 build number (8c2fd38797).
Mark 5 firmware 4.9.11314 build number (8c2fd38797).
Mark 6 firmware 4.9.11311 build number (112578920c).
Mark 7 firmware 4.9.11311 build number (112578920c).

*Mark 3 not available.

Which one for Glo HD?
Thank you

Ripplinger · 08-01-2018, 12:54 PM

Quote:

Originally Posted by avresbo

Which one for Glo HD?
Thank you

Quote:

Originally Posted by Ripplinger

I installed Firmware 4.9.11311. The Glo HD is a Mark 6 device.

Install this one for the Glo HD:
Mark 6 firmware 4.9.11311 build number (112578920c).

JSWolf · 08-01-2018, 07:59 PM

4.9.11314 is a mistake. It should be 4.9.11311.

DNSB · 08-01-2018, 08:10 PM

Quote:

Originally Posted by JSWolf

4.9.11314 is a mistake. It should be 4.9.11311.

Jon, Jon... The firmware .zip filename says 11311 but the installed version says 11314.

carpodacus · 08-15-2018, 05:34 PM

A bug appeared with this new update: While reading a book or an article, when I tap on the middle of the screen (in order to show the sidebars), my ebook freezes, the led blinks, and the ebook reboots. This means I cannot resume my reading without going to the end of the book or forcing a crash of the ebook. It has a 100% reproduction rate. I reinitialised my ebook, it worked great again, until I was asked and installed again the new firmware (4.9.11311). I am on a Kobo Aura H2O Edition 2, I don't know if anyone else has this same bug appearing.

07-23-2018, 12:39 PM	#99
oren64 I need a chapter break Posts: 4,042 Karma: 56058267 Join Date: Mar 2015 Location: Israel Device: Kobo Glo	It doesn't say it not compatible it say "Not for...H2O", although firmware 4.9.11311 is not officially release to H2O, Mark 4 and Mark 5 are available to download. Sometime Kobo release firmware marks that are not officially release to devises or that are planing to release officially on a latter day. I didn't see any complaints about installing mark 4 or 5. Last edited by oren64; 07-23-2018 at 03:52 PM.

08-15-2018, 05:34 PM	#105
carpodacus Junior Member Posts: 2 Karma: 10 Join Date: Aug 2018 Device: Kobo Aura H2O Edition 2	New Bug on Kobo Aura H2O Edition 2 A bug appeared with this new update: While reading a book or an article, when I tap on the middle of the screen (in order to show the sidebars), my ebook freezes, the led blinks, and the ebook reboots. This means I cannot resume my reading without going to the end of the book or forcing a crash of the ebook. It has a 100% reproduction rate. I reinitialised my ebook, it worked great again, until I was asked and installed again the new firmware (4.9.11311). I am on a Kobo Aura H2O Edition 2, I don't know if anyone else has this same bug appearing.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Firmware Update Instructions and the latest Firmware Versions	mitchwah	Ectaco jetBook	113	10-24-2023 09:02 PM
Firmware glitch - typing text slow on some firmware+device combinations	mdp	Onyx Boox	11	11-11-2017 12:48 AM
Firmware 2.0.3 Pocketbook IQ - another firmware is release for IQ	tvpupsik	PocketBook	26	12-13-2010 03:03 PM
UK Firmware	duckbill	Sony Reader	6	03-30-2010 04:47 AM
SMARTQ7: firmware 5 VS .92 firmware 5.1?	wwang	Alternative Devices	2	12-17-2009 12:41 PM

07-21-2018, 03:36 AM	#91
lightbulbjim Enthusiast Posts: 37 Karma: 37518 Join Date: Aug 2011 Location: Australia Device: Kobo	My H2O2 mk1 (silly naming scheme) updated itself last night and I’m also not seeing the top margin bug. All I use are epubs but they’re working just fine...

07-21-2018, 05:53 AM	#92
Ansl Enthusiast Posts: 33 Karma: 5322 Join Date: Apr 2014 Location: Northern European utopia Device: Kobo H2O2v1	Another little fix with this fw is that the letter following a full stop is again a capital one by default. That and the improved search definitely mark this an update worth trying in my eyes ;-)

08-01-2018, 07:59 PM	#103
JSWolf Resident Curmudgeon Posts: 79,743 Karma: 145864619 Join Date: Nov 2006 Location: Roslindale, Massachusetts Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3	4.9.11314 is a mistake. It should be 4.9.11311.

Advert

Advert