Kobo Patcher - Page 25

jackie_w · 11-08-2013, 10:08 AM

Quote:

Originally Posted by JSWolf

What about the top/bottom margins patch? Has that been found?

Just FYI, there has never been a top margin Patch, only a bottom margin. In the previous fw, standard epubs only displayed a top margin if the css specified one. Whereas, as far as I know, kepubs have always had one and continue to do so.

gong · 11-08-2013, 03:51 PM

Hello,

I have a kobo mini with fw 2.6.2 and I'm not sure whether the patcher is available (Unofficial support for 2.8.1B) or not for this version. I mean, are 2.6.2 and 2.8.1b the same or not?
What's written in the FW sticky about 2.6.2 and 2.8.1b is not totally clear to me...

ShellShock · 11-09-2013, 04:54 AM

The CSS in libnickel.so.1.0.0 that we use to change the bottom margin height seems to have disappeared in 2.10.0. Perhaps it is now encrypted?

PeterT · 11-09-2013, 09:08 AM

A lot of the CSS has moved into nickel itself.

ShellShock · 11-09-2013, 09:28 AM

Yes, it has been moved to nickel but I could not find the ReadingFooter in nickel either.

GeoffR · 11-09-2013, 10:49 AM

Quote:

Originally Posted by gong

I have a kobo mini with fw 2.6.2 and I'm not sure whether the patcher is available (Unofficial support for 2.8.1B) or not for this version. I mean, are 2.6.2 and 2.8.1b the same or not?
What's written in the FW sticky about 2.6.2 and 2.8.1b is not totally clear to me...

2.6.1, 2.6.1b, 2.6.2, 2.8.1, 2.8.1b are all different firmware, you can't use the patches for one of them on any other one.

I think it is possible to sideload fimware 2.8.1b to the Mini though, and if you did that then you could apply the patches for 2.8.1b. I haven't done this myself though, so you might want to get confirmation that it works from someone who has done it.

JSWolf · 11-09-2013, 11:21 AM

I may have to hold off on looking at the Aura if the ReadingFooter cannot be found. I don't want a large gap at the bottom of the screen.

lordofazeroth · 11-09-2013, 06:24 PM

does anybody owning a kobo mini have played with the margins?
Would it possible to post the kpg.conf file, please?

Thanks in Advance

PeterT · 11-09-2013, 11:12 PM

@lordofazeroth: What f/w level?

lordofazeroth · 11-10-2013, 02:35 AM

2.8.1

Nick_1964 · 11-10-2013, 06:08 AM

I Have seen something odd... Changing the font, is also changing the font of the line page 12 of 264 ( example) at the end of the page.
Even when the font in the epub can't be changed by rules in the css file of the epub, the font of that last line does.
When you pic up out a strange font, else then Amasis, It will even get out of the screen.
So how to change, or stop this.. fw 2.8.1

tshering · 11-10-2013, 07:42 AM

Quote:

Originally Posted by Nick_1964

I Have seen something odd... Changing the font, is also changing the font of the line page 12 of 264 ( example) at the end of the page.
Even when the font in the epub can't be changed by rules in the css file of the epub, the font of that last line does.
When you pic up out a strange font, else then Amasis, It will even get out of the screen.
So how to change, or stop this.. fw 2.8.1

Try defining the font-family in "Custom reading footer style", there is enough place for adding the definition.

Nick_1964 · 11-10-2013, 10:05 AM

Quote:

Originally Posted by tshering

Try defining the font-family in "Custom reading footer style", there is enough place for adding the definition.

Hmm a good one... but how... Amasis is perfect but an intern font.. This is the part of my code:

Code:


replace_zlib = 1205FF4, `ReadingFooter {\n\tmin-height: 70px;\n\tmax-height: 70px;\n\tqproperty-footerMargin: 40;\n}\n\nReadingFooter[deviceCodeName="kraken"], \nReadingFooter[deviceCodeName="phoenix"] {\n\tmin-height: 82px;\n\tmax-height: 82px;\n\tqproperty-footerMargin: 110;\n}\n\nReadingFooter[deviceCodeName="dragon"] {\n\tmin-height: 120px;\n\tmax-height: 120px;\n\tqproperty-footerMargin: 20;\n}\n\n* {\n\tfont-size: 16px;\n}\n\n[deviceCodeName="kraken"], \n[deviceCodeName="phoenix"] {\n\tfont-size: 20px;\n}\n\n[deviceCodeName="dragon"] {\n\tfont-size: 26px;\n}\n\n[localeName="ja_JP"] {\n\tfont-family: A-OTF Gothic MB101 Pr6N;\n}`, `ReadingFooter {\n\tmin-height: 70px;\n\tmax-height: 70px;\n\tqproperty-footerMargin: 40;\n}\n\nReadingFooter[deviceCodeName="kraken"], \nReadingFooter[deviceCodeName="phoenix"] {\n\tmin-height: 40px;\n\tmax-height: 40px;\n\tqproperty-footerMargin: 40;\n}\n\nReadingFooter[deviceCodeName="dragon"] {\n\tmin-height: 70px;\n\tmax-height: 70px;\n\tqproperty-footerMargin: 20;\n}\n\n* {\n\tfont-size: 16px;\n}\n\n[deviceCodeName="kraken"], \n[deviceCodeName="phoenix"] {\n\tfont-size: 20px;\n}\n\n[deviceCodeName="dragon"] {\n\tfont-size: 31px;\n}\n\n[localeName="ja_JP"] {\n\tfont-family: A-OTF Gothic MB101 Pr6N;\n}`

I am just a bit scare to just enter amasis somewhere .

tshering · 11-10-2013, 02:21 PM

Quote:

Originally Posted by Nick_1964

Hmm a good one... but how... Amasis is perfect but an intern font.. This is the part of my code:

Code:


replace_zlib = 1205FF4, `ReadingFooter {\n\tmin-height: 70px;\n\tmax-height: 70px;\n\tqproperty-footerMargin: 40;\n}\n\nReadingFooter[deviceCodeName="kraken"], \nReadingFooter[deviceCodeName="phoenix"] {\n\tmin-height: 82px;\n\tmax-height: 82px;\n\tqproperty-footerMargin: 110;\n}\n\nReadingFooter[deviceCodeName="dragon"] {\n\tmin-height: 120px;\n\tmax-height: 120px;\n\tqproperty-footerMargin: 20;\n}\n\n* {\n\tfont-size: 16px;\n}\n\n[deviceCodeName="kraken"], \n[deviceCodeName="phoenix"] {\n\tfont-size: 20px;\n}\n\n[deviceCodeName="dragon"] {\n\tfont-size: 26px;\n}\n\n[localeName="ja_JP"] {\n\tfont-family: A-OTF Gothic MB101 Pr6N;\n}`, `ReadingFooter {\n\tmin-height: 70px;\n\tmax-height: 70px;\n\tqproperty-footerMargin: 40;\n}\n\nReadingFooter[deviceCodeName="kraken"], \nReadingFooter[deviceCodeName="phoenix"] {\n\tmin-height: 40px;\n\tmax-height: 40px;\n\tqproperty-footerMargin: 40;\n}\n\nReadingFooter[deviceCodeName="dragon"] {\n\tmin-height: 70px;\n\tmax-height: 70px;\n\tqproperty-footerMargin: 20;\n}\n\n* {\n\tfont-size: 16px;\n}\n\n[deviceCodeName="kraken"], \n[deviceCodeName="phoenix"] {\n\tfont-size: 20px;\n}\n\n[deviceCodeName="dragon"] {\n\tfont-size: 31px;\n}\n\n[localeName="ja_JP"] {\n\tfont-family: A-OTF Gothic MB101 Pr6N;\n}`

I am just a bit scare to just enter amasis somewhere .

For the sake of brevity and better readability I give only the replacement part (that which follows the comma).

Code:

`ReadingFooter {\n\tmin-height: 70px;\n\tmax-height: 70px;\n\tqproperty-footerMargin: 20;\n}\n\n* {\n\tfont-size: 31px;\n\tfont-family: Amasis;\n}\n\n[localeName="ja_JP"] {\n\tfont-family: A-OTF Gothic MB101 Pr6N;\n}`

I think this should be working. I did however not try myself, since my reader is not on FW 2.8.1.

Nick_1964 · 11-10-2013, 02:47 PM

Quote:

Originally Posted by tshering

For the sake of brevity and better readability I give only the replacement part (that which follows the comma).

Code:

`ReadingFooter {\n\tmin-height: 70px;\n\tmax-height: 70px;\n\tqproperty-footerMargin: 20;\n}\n\n* {\n\tfont-size: 31px;\n\tfont-family: Amasis;\n}\n\n[localeName="ja_JP"] {\n\tfont-family: A-OTF Gothic MB101 Pr6N;\n}`

I think this should be working. I did however not try myself, since my reader is not on FW 2.8.1.

I gonna try it this evening

/edit Works like a charm, you are fantastic !

11-08-2013, 03:51 PM	#362
gong Enthusiast Posts: 47 Karma: 384 Join Date: Nov 2013 Device: Kobo Mini (f/w 3.4.1) + Aura (f/w 3.12.1)	Hello, I have a kobo mini with fw 2.6.2 and I'm not sure whether the patcher is available (Unofficial support for 2.8.1B) or not for this version. I mean, are 2.6.2 and 2.8.1b the same or not? What's written in the FW sticky about 2.6.2 and 2.8.1b is not totally clear to me... Last edited by gong; 11-08-2013 at 04:05 PM. Reason: clearer question

11-09-2013, 09:28 AM	#365
ShellShock Wizard Posts: 1,178 Karma: 2431850 Join Date: Sep 2008 Device: IPad Mini 2 Retina	Yes, it has been moved to nickel but I could not find the ReadingFooter in nickel either. Last edited by ShellShock; 11-09-2013 at 10:04 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Glo How to import reading Life Statistics from Kobo Touch to Kobo Glo?	the_m	Kobo Reader	5	12-13-2012 04:40 PM
$25 gift card w. purchase of Kobo Touch or Kobo Vox at Frys	sufue	Deals and Resources (No Self-Promotion or Affiliate Links)	0	07-15-2012 11:39 AM
Touch Kobo Touch defective after 3 months and Kobo Customer Support useless	shaf	Kobo Reader	5	12-04-2011 06:10 PM
Touch Kobo Touch not ejecting cleanly with Calibre OR Kobo Desktop - Windows 7	JBlyth	Kobo Reader	11	08-03-2011 06:38 PM
Kobo Touch not disconnecting properly from Calibre OR Kobo Desktop - Windows 7	JBlyth	Devices	1	08-03-2011 07:50 AM

11-09-2013, 04:54 AM	#363
ShellShock Wizard Posts: 1,178 Karma: 2431850 Join Date: Sep 2008 Device: IPad Mini 2 Retina	The CSS in libnickel.so.1.0.0 that we use to change the bottom margin height seems to have disappeared in 2.10.0. Perhaps it is now encrypted?

11-09-2013, 09:08 AM	#364
PeterT Grand Sorcerer Posts: 13,698 Karma: 79983758 Join Date: Nov 2007 Location: Toronto Device: Libra H2O, Libra Colour	A lot of the CSS has moved into nickel itself.

11-09-2013, 11:21 AM	#367
JSWolf Resident Curmudgeon Posts: 80,784 Karma: 150249619 Join Date: Nov 2006 Location: Roslindale, Massachusetts Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3	I may have to hold off on looking at the Aura if the ReadingFooter cannot be found. I don't want a large gap at the bottom of the screen.

11-09-2013, 06:24 PM	#368
lordofazeroth Connoisseur Posts: 70 Karma: 10 Join Date: Dec 2008 Device: kobo mini and kindle touch	does anybody owning a kobo mini have played with the margins? Would it possible to post the kpg.conf file, please? Thanks in Advance

11-09-2013, 11:12 PM	#369
PeterT Grand Sorcerer Posts: 13,698 Karma: 79983758 Join Date: Nov 2007 Location: Toronto Device: Libra H2O, Libra Colour	@lordofazeroth: What f/w level?

11-10-2013, 02:35 AM	#370
lordofazeroth Connoisseur Posts: 70 Karma: 10 Join Date: Dec 2008 Device: kobo mini and kindle touch	2.8.1

11-10-2013, 06:08 AM	#371
Nick_1964 Bookworm Posts: 975 Karma: 768585 Join Date: Aug 2010 Location: Netherlands Device: Sony prs-650, Kobo Glo HD (2x), Kobo Glo	I Have seen something odd... Changing the font, is also changing the font of the line page 12 of 264 ( example) at the end of the page. Even when the font in the epub can't be changed by rules in the css file of the epub, the font of that last line does. When you pic up out a strange font, else then Amasis, It will even get out of the screen. So how to change, or stop this.. fw 2.8.1

Advert

Advert