Sony PRS-300 large PDFs viewing

beniof · 07-09-2010, 04:53 AM

Hi! I have bought Sony PRS-300 reader two months ago and still can't use it for reading. I have many large PDFs which contain tables etc.
and I wanted to read them. For sure, it is impossible to read these PDFs as PDFs because changing the pages is very, very slow. I spent a lot of time with different programmes, but only get more frustratied.
What really helped was to convert them to .LRF using Calibre. Despite of the time it takes to convert 6mb file (more than one hour) and that it makes a
6mb to a file 40mb, it works fine. But, the problem is, that the letters were too smal and they can't be resized on the reader.
So, what I decided to do, was to resize pages using Foxit PDF Editor
manually. It took about 0,5 h for every 100 pages. I saved the PDF and everything was fine in an Acrobat Reader. Then I converted it to .LRF using Calibre and send to my reader...the pages were not resized, only the cover... Why? I tried different settings, didn't help. Below you can see how I resized the page.

JSWolf · 07-09-2010, 05:38 AM

The problem is that a 5" eink screen is just way too small for large PDF. Even a 6" screen won't do.

beniof · 07-09-2010, 06:05 AM

hmm, perhaps it is hard to understand what I wrote, but will try to explain it clear. The problem is with converted .LRF file. When I send to my reader the .PDF file which was resized manually using FOXIT PDF EDITOR it is shown as I would like it to be shown: can read it easily. But the problem is that changing the pages is very, very slow. When I convert that resized PDF file to .LRF only the cover is resized, all other pages - not. So it is not a problem with Sony PRS reader.

darknessangel · 07-09-2010, 07:30 AM

What you did was bad and you should feel bad about it. Subjecting a poor 5" screen to large pdfs with tables *shakes head*. Not even on my 505.

On your conversion thingie... I'm not an expert but have you tried converting to... epub or rtf? And perhaps you should post in the Calibre forum or somewhere else but related to "format conversion" not large pdf viewing cause everyone thinks about large ebook readers when they see that.

GJMS

ebookapps · 07-09-2010, 06:08 PM

Try our software, which can be just dropped to Sony Reader over USB, no device flashing is required. You will be able to read PDF files more effectively that on the original PDF viewer

Software can be downloaded from www.ebookapplications.com

07-09-2010, 04:53 AM	#1
beniof Junior Member Posts: 3 Karma: 10 Join Date: Jul 2010 Device: PRS-300	Sony PRS-300 large PDFs viewing Hi! I have bought Sony PRS-300 reader two months ago and still can't use it for reading. I have many large PDFs which contain tables etc. and I wanted to read them. For sure, it is impossible to read these PDFs as PDFs because changing the pages is very, very slow. I spent a lot of time with different programmes, but only get more frustratied. What really helped was to convert them to .LRF using Calibre. Despite of the time it takes to convert 6mb file (more than one hour) and that it makes a 6mb to a file 40mb, it works fine. But, the problem is, that the letters were too smal and they can't be resized on the reader. So, what I decided to do, was to resize pages using Foxit PDF Editor manually. It took about 0,5 h for every 100 pages. I saved the PDF and everything was fine in an Acrobat Reader. Then I converted it to .LRF using Calibre and send to my reader...the pages were not resized, only the cover... Why? I tried different settings, didn't help. Below you can see how I resized the page. Attached Thumbnails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sony PRS-300 vs. Nook wifi for PDFs	flyash	Which one should I buy?	2	06-22-2010 11:57 AM
prs-300 or prs-600 for pdfs?	schmolch	Sony Reader	8	09-17-2009 07:16 AM
Canadian perspective of the recent Sony ebook readers - PRS-300/PRS-600/PRS-2121	nrapallo	News	1	08-29-2009 10:38 AM
Viewing scientific pdfs with sony prs 700	b0n1	Sony Reader	2	08-04-2009 06:20 AM
Sony PRS-505 Resets When Viewing Calibre Generated Content	mjm2705	Calibre	6	11-23-2008 06:10 PM

07-09-2010, 05:38 AM	#2
JSWolf Resident Curmudgeon Posts: 78,914 Karma: 143095300 Join Date: Nov 2006 Location: Roslindale, Massachusetts Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3	The problem is that a 5" eink screen is just way too small for large PDF. Even a 6" screen won't do.

07-09-2010, 06:05 AM	#3
beniof Junior Member Posts: 3 Karma: 10 Join Date: Jul 2010 Device: PRS-300	hmm, perhaps it is hard to understand what I wrote, but will try to explain it clear. The problem is with converted .LRF file. When I send to my reader the .PDF file which was resized manually using FOXIT PDF EDITOR it is shown as I would like it to be shown: can read it easily. But the problem is that changing the pages is very, very slow. When I convert that resized PDF file to .LRF only the cover is resized, all other pages - not. So it is not a problem with Sony PRS reader.

07-09-2010, 07:30 AM	#4
darknessangel Addict Posts: 297 Karma: 1018140 Join Date: Feb 2009 Device: PRS-505, iPad	What you did was bad and you should feel bad about it. Subjecting a poor 5" screen to large pdfs with tables shakes head. Not even on my 505. On your conversion thingie... I'm not an expert but have you tried converting to... epub or rtf? And perhaps you should post in the Calibre forum or somewhere else but related to "format conversion" not large pdf viewing cause everyone thinks about large ebook readers when they see that. GJMS

07-09-2010, 06:08 PM	#5
ebookapps Enthusiast Posts: 49 Karma: 432 Join Date: Jun 2010 Location: USA Device: Sony PRS–300, Sony PRS-505	Try our software, which can be just dropped to Sony Reader over USB, no device flashing is required. You will be able to read PDF files more effectively that on the original PDF viewer Software can be downloaded from www.ebookapplications.com

Advert

Advert