DR1000 a wall charger for irex dr1000s?

KingDani · 07-01-2010, 07:40 AM

i recently bought from DealExtreme a wall charger for ipods , it is a clone of oroginal , and it states on it it 1A and 5Vs. i used it to charge the ipod for a couple of times with no hassle , and i used it one DR1000s as well , but i noticed that when it is plugged , the LED on top of reader glows orange , and at least 2-3 touch keys become green too. they are on the side , and usually to two bottom ones are constantly green. should i be worried about battery of my device?
i warn you , i never used a wall charger for this device and always used USB port of my macbook , so these things might be normal and i am not aware of it.
so should i pull the plug literally?
cheers

Gwaihir · 07-01-2010, 08:48 AM

The orange LED is normal: that indicates charging.

The issues you mention have been reported with several other chargers as well, see the accessory list: https://www.mobileread.com/forums/showthread.php?t=48256 . It seems to make the device unusable while charging, but AFAIK no other side effects have been reported. I.e. nobody knows whether this damages device or battery, but there is no direct evidence that it does.

pauli · 07-01-2010, 08:49 AM

you can probably use it to charge your DR1000. But if you want to use your DR1000, you better disconnect the charger, because it is disturbing the micro controller that is controlling the cap sensors. If it's one of those cheapo cheapo USB chargers, you also better check if the output is really 5 V... I've seen so called USB chargers that output 7.5V or are designed for a specific load.

KingDani · 07-01-2010, 09:11 AM

thnx to both of you guys , it's a bit reassuring . as for the charger , i can not be sure , since i do not have the necessary equipment to measure the output. but it looks fairly usable and it's not the worst one i've seen. in fact it was 2times more expensive than regular ones (like 6 USD) and it was advertised as ipod safe , so i decided to use it. i also looked into ebay auctions , but there was just one guy who sells non-oem chargers and the specs are the same with this one. anyway , i never use my device when charging , so you reckon it's ok?

Shaggy · 07-01-2010, 12:01 PM

Quote:

Originally Posted by KingDani

so you reckon it's ok?

Not sure anyone can say, without testing the charger.

Many USB chargers don't follow the specs. Even though they may say they work fine with one device (iPod, for example), that doesn't mean that they will work correctly with the DR1000. Some devices are designed with wider specs than others with regards to the charger.

I think that messing up the cap sensors is a pretty good sign that something is not right, and it isn't charging with the same output that the DR1000 was designed for. Is that enough to damage the device...

KingDani · 07-01-2010, 08:15 PM

Quote:

Originally Posted by Shaggy

Not sure anyone can say, without testing the charger.

Many USB chargers don't follow the specs. Even though they may say they work fine with one device (iPod, for example), that doesn't mean that they will work correctly with the DR1000. Some devices are designed with wider specs than others with regards to the charger.

I think that messing up the cap sensors is a pretty good sign that something is not right, and it isn't charging with the same output that the DR1000 was designed for. Is that enough to damage the device...

yeah , you probably are right shaggy . wise as always. i was kinda looking for for someone to say what i want to hear. anyway , i must try other ones or go for an official one.
thnx anyway

myprecious · 07-02-2010, 06:49 AM

@KingDani - you know this forum so why haven't you bought one of the compatible chargers that are listed here https://www.mobileread.com/forums/showthread.php?t=48256

07-01-2010, 07:40 AM	#1
KingDani Zealot Posts: 114 Karma: 10 Join Date: Jan 2008 Location: Philly, PA Device: iRex DR1000s,Gigabyte U60 UMPC, SmartQ v7,EKEN M001	a wall charger for irex dr1000s? i recently bought from DealExtreme a wall charger for ipods , it is a clone of oroginal , and it states on it it 1A and 5Vs. i used it to charge the ipod for a couple of times with no hassle , and i used it one DR1000s as well , but i noticed that when it is plugged , the LED on top of reader glows orange , and at least 2-3 touch keys become green too. they are on the side , and usually to two bottom ones are constantly green. should i be worried about battery of my device? i warn you , i never used a wall charger for this device and always used USB port of my macbook , so these things might be normal and i am not aware of it. so should i pull the plug literally? cheers

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
USB Wall Charger	RedRoverJ	Kobo Reader	53	01-02-2014 05:26 AM
Accessories Wall charger alternative	gearfarmer	Amazon Kindle	21	11-25-2012 03:10 PM
Accessories Wall charger for Kindle 3	oscarino	Amazon Kindle	7	10-02-2010 04:53 PM
Help! Is my problem the K1 or it's charger (wall)	texasnightowl	Amazon Kindle	5	05-19-2010 03:43 AM
Gomadic Rapid Wall Charger	Minglewood	Sony Reader	3	03-09-2010 11:26 AM

07-01-2010, 08:48 AM	#2
Gwaihir The Windlord Posts: 119 Karma: 10 Join Date: Jun 2009 Location: Netherlands Device: iRex DR1000S, BeBook Club S	The orange LED is normal: that indicates charging. The issues you mention have been reported with several other chargers as well, see the accessory list: https://www.mobileread.com/forums/showthread.php?t=48256 . It seems to make the device unusable while charging, but AFAIK no other side effects have been reported. I.e. nobody knows whether this damages device or battery, but there is no direct evidence that it does.

07-01-2010, 08:49 AM	#3
pauli Groupie Posts: 185 Karma: 119824 Join Date: Feb 2008 Device: iLiad, DR1000S, HTC Hero, DR800SG	you can probably use it to charge your DR1000. But if you want to use your DR1000, you better disconnect the charger, because it is disturbing the micro controller that is controlling the cap sensors. If it's one of those cheapo cheapo USB chargers, you also better check if the output is really 5 V... I've seen so called USB chargers that output 7.5V or are designed for a specific load.

07-01-2010, 09:11 AM	#4
KingDani Zealot Posts: 114 Karma: 10 Join Date: Jan 2008 Location: Philly, PA Device: iRex DR1000s,Gigabyte U60 UMPC, SmartQ v7,EKEN M001	thnx to both of you guys , it's a bit reassuring . as for the charger , i can not be sure , since i do not have the necessary equipment to measure the output. but it looks fairly usable and it's not the worst one i've seen. in fact it was 2times more expensive than regular ones (like 6 USD) and it was advertised as ipod safe , so i decided to use it. i also looked into ebay auctions , but there was just one guy who sells non-oem chargers and the specs are the same with this one. anyway , i never use my device when charging , so you reckon it's ok?

07-02-2010, 06:49 AM	#7
myprecious Zealot Posts: 100 Karma: 28 Join Date: Mar 2009 Location: Nowy Targ, Poland Device: DR1000S	@KingDani - you know this forum so why haven't you bought one of the compatible chargers that are listed here https://www.mobileread.com/forums/showthread.php?t=48256

Advert

Advert