SmartQ 7 - Black screen after booting in portrait mode

david83k · 09-08-2009, 07:37 PM

Hello!

I have used the screen rotation tool which can be found on JT's World blog (http://www.filefactory.com/file/ahh5...otate_v4_0_zip). The tool worked fine. It has rotated my screen into the portrait mode. But I can't get into the OS after I have rebootet the device in portrait mode. The screen keeps turning black (with backlight on) when I am supposed to see the desktop. I have reflashed the firmware v4.0 again and tried to reboot in portrait mode and the screen turned black after boot again.

Can you boot in portrait mode without any problem?

Nation.A.List · 09-09-2009, 05:55 AM

Quote:

Originally Posted by david83k

Hello!

I have used the screen rotation tool which can be found on JT's World blog (http://www.filefactory.com/file/ahh5...otate_v4_0_zip). The tool worked fine. It has rotated my screen into the portrait mode. But I can't get into the OS after I have rebootet the device in portrait mode. The screen keeps turning black (with backlight on) when I am supposed to see the desktop. I have reflashed the firmware v4.0 again and tried to reboot in portrait mode and the screen turned black after boot again.

Can you boot in portrait mode without any problem?

How did the re-flash go? Did it complete OK? Did you tell it to keep settings?

david83k · 09-09-2009, 11:53 AM

Thanks for replying!

I had no problems with reflashing it (have done it about 5 times or more). I have always reflashed the device without keeping the settings because I've never set anything on my SmartQ (just read some ebooks and surfed the web).

Everything is OK after reflashing! But when I reboot the device in portrait mode the screen turns black again. I could just use it in landscape mode or switch it back to landsape mode before I reboot. But I want to use it exclusively in portrait mode.

Another question. When I tap on the battery indicator it doesn't show me the percentage of the remaining battery life. I am sure that I've seen the percentage before - probably before I reflashed the device. Does anyone know what the problem could be?

Nation.A.List · 09-09-2009, 12:08 PM

Quote:

Originally Posted by david83k

Thanks for replying!
I had no problems with reflashing it (have done it about 5 times or more). I have always reflashed the device without keeping the settings because I've never set anything on my SmartQ (just read some ebooks and surfed the web).
Everything is OK after reflashing! But when I reboot the device in portrait mode the screen turns black again. I could just use it in landscape mode or switch it back to landsape mode before I reboot. But I want to use it exclusively in portrait mode.
Another question. When I tap on the battery indicator it doesn't show me the percentage of the remaining battery life. I am sure that I've seen the percentage before - probably before I reflashed the device. Does anyone know what the problem could be?

Ok, slight misunderstanding on my part. Only thing I can think of right now would involve some script writing.

1) Icon on desktop that Turns Off device after returning screen to landscape 2) Auto-start rotate app and set to portrait, on boot-up.

serwei · 09-10-2009, 06:18 AM

erm yeah it's a cfm bug, u can't boot up in portrait mode v4.
u can however, attach a USB mouse, boot up, and then click on the Rotate.sh
the crash comes only when u touch the screen. otherwise everything is still running.

serwei · 09-10-2009, 06:19 AM

is there an autoexec.bat mechanism to place that startup script? it's not cron... is it the .bash something something?
thanks!

serwei · 09-10-2009, 06:24 AM

oh put something in /etc/init.d/

Nation.A.List · 09-10-2009, 06:26 AM

Yeah, I meant 2) Auto-start rotate app and set to portrait, immediately after boot-up.

I don't know the method, I would google it "Linux autorun apps" or something like that.

david83k · 09-10-2009, 09:33 AM

Hey. The problem suddenly disappeared! Now I can boot up in portrait mode and the battery indicator shows me the percentage of the remaining battery life.. I don't know what has happened.. This time I booted up with a USB mouse and used the mouse to install the rotate_tool. Maybe this helped. Maybe it was coincidence.. However, I thank you Nation.A.List and serwei!

09-08-2009, 07:37 PM	#1
david83k Member Posts: 10 Karma: 10 Join Date: Aug 2009 Device: SmartQ7, Sony PRS-600	SmartQ 7 - Black screen after booting in portrait mode Hello! I have used the screen rotation tool which can be found on JT's World blog (http://www.filefactory.com/file/ahh5...otate_v4_0_zip). The tool worked fine. It has rotated my screen into the portrait mode. But I can't get into the OS after I have rebootet the device in portrait mode. The screen keeps turning black (with backlight on) when I am supposed to see the desktop. I have reflashed the firmware v4.0 again and tried to reboot in portrait mode and the screen turned black after boot again. Can you boot in portrait mode without any problem?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
actual screen size for smartQ and W1060	iakovl	Alternative Devices	5	01-11-2010 01:29 AM
PRS-600 Edge of screen very faint in Landscape mode?	gadgetfreak	Sony Reader	6	10-16-2009 05:56 AM
Mobipocket full screen mode problem	Team7	Reading and Management	4	03-02-2009 02:13 PM
Any way to force portrait mode?	eastbayarb	Amazon Kindle	0	06-14-2008 06:27 PM
Put your Sony Reader in High-Contrast Mode (white-on-black)	alex_d	Sony Reader	16	06-20-2007 05:23 AM

09-09-2009, 11:53 AM	#3
david83k Member Posts: 10 Karma: 10 Join Date: Aug 2009 Device: SmartQ7, Sony PRS-600	Thanks for replying! I had no problems with reflashing it (have done it about 5 times or more). I have always reflashed the device without keeping the settings because I've never set anything on my SmartQ (just read some ebooks and surfed the web). Everything is OK after reflashing! But when I reboot the device in portrait mode the screen turns black again. I could just use it in landscape mode or switch it back to landsape mode before I reboot. But I want to use it exclusively in portrait mode. Another question. When I tap on the battery indicator it doesn't show me the percentage of the remaining battery life. I am sure that I've seen the percentage before - probably before I reflashed the device. Does anyone know what the problem could be?

09-10-2009, 06:18 AM	#5
serwei Connoisseur Posts: 53 Karma: 12 Join Date: Aug 2009 Device: Smart Q7	erm yeah it's a cfm bug, u can't boot up in portrait mode v4. u can however, attach a USB mouse, boot up, and then click on the Rotate.sh the crash comes only when u touch the screen. otherwise everything is still running.

09-10-2009, 06:19 AM	#6
serwei Connoisseur Posts: 53 Karma: 12 Join Date: Aug 2009 Device: Smart Q7	is there an autoexec.bat mechanism to place that startup script? it's not cron... is it the .bash something something? thanks!

09-10-2009, 06:24 AM	#7
serwei Connoisseur Posts: 53 Karma: 12 Join Date: Aug 2009 Device: Smart Q7	oh put something in /etc/init.d/

09-10-2009, 06:26 AM	#8
Nation.A.List Addict Posts: 270 Karma: 112 Join Date: Jun 2009 Location: England Device: SmartQ 7	Yeah, I meant 2) Auto-start rotate app and set to portrait, immediately after boot-up. I don't know the method, I would google it "Linux autorun apps" or something like that.

09-10-2009, 09:33 AM	#9
david83k Member Posts: 10 Karma: 10 Join Date: Aug 2009 Device: SmartQ7, Sony PRS-600	Hey. The problem suddenly disappeared! Now I can boot up in portrait mode and the battery indicator shows me the percentage of the remaining battery life.. I don't know what has happened.. This time I booted up with a USB mouse and used the mouse to install the rotate_tool. Maybe this helped. Maybe it was coincidence.. However, I thank you Nation.A.List and serwei!

Advert

Advert