G000K9 KT3 dead?

mad_maks · 10-09-2020, 01:56 PM

Hello,
I've got probably bricked G000K9 Kindle Basic 2 (2016) KT3. After connecting thru serial port (1,8V) I see only this part of booting process:

Code:

U-Boot 2014.04 (Mar 19 2020 - 22:30:49)

CPU:   Freescale i.MX6SL rev1.3 at 792 MHz
CPU:   Temperature 30 C, calibration data: 0x5774f95f
Reset cause: POR
FRED::: EXTCSD177=0, 179=48FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Board: Heisenberg
Board Id: P00118077426092X
S/N: G000K90574260B56
I2C:   ready
DRAM:  MR5=0x1,MR6=0x4 512 MiB

No more lines. Nothing.I cannot boot into diags. No "uboot>" prompt.

What can I do next?

delarcroix · 12-03-2020, 09:26 AM

i think i have the same problem here:

Code:

U-Boot 2014.04 (Aug 28 2016 - 22:50:02)

CPU:   Freescale i.MX6SL rev1.3 at 792 MHz
CPU:   Temperature 37 C, calibration data: 0x5925175f
Reset cause: POR
FRED::: EXTCSD177=0, 179=48 FSL_SDHC: 2
Board: Heisenberg
Board Id: P00XXXXXXXXXXXXX
S/N: G000KAXXXXXXXXXXXX
I2C:   ready
DRAM:  MR5=0x6,MR6=0x3 512 MiB

and stops after that,

have you figured it out?

mad_maks · 12-04-2020, 03:31 PM

I'm sorry I still have no clue what to do. I've already purchased new battery (maybe it is battery realated problem). When I get it I will be diggin' more.

ivegotkindle · 12-15-2020, 04:42 AM

Quote:

Originally Posted by mad_maks

I'm sorry I still have no clue what to do. I've already purchased new battery (maybe it is battery realated problem). When I get it I will be diggin' more.

OOT, I'm sorry.

Where did you buy KT3's battery? I'm already looking around in my country but I can't find any. If you can PM me the listing I would be extremely grateful!

mad_maks · 04-14-2021, 02:42 PM

*bump* Anyone?

eddie.t.h · 04-28-2021, 10:43 AM

I had a similar case. For me, the solution was memory reballing. Unfortunately, to do this, you need to unstick the display, which of course ended up damaging it and replacing with a new one.

mad_maks · 04-30-2021, 02:15 PM

Oh that sounds bad

Thank you for the info. I will try to use my hot air station.

10-09-2020, 01:56 PM	#1
mad_maks Junior Member Posts: 9 Karma: 10 Join Date: Oct 2020 Device: G000K9 Kindle Basic 2 (2016) KT3	G000K9 KT3 dead? Hello, I've got probably bricked G000K9 Kindle Basic 2 (2016) KT3. After connecting thru serial port (1,8V) I see only this part of booting process: Code: U-Boot 2014.04 (Mar 19 2020 - 22:30:49) CPU: Freescale i.MX6SL rev1.3 at 792 MHz CPU: Temperature 30 C, calibration data: 0x5774f95f Reset cause: POR FRED::: EXTCSD177=0, 179=48FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Board: Heisenberg Board Id: P00118077426092X S/N: G000K90574260B56 I2C: ready DRAM: MR5=0x1,MR6=0x4 512 MiB No more lines. Nothing.I cannot boot into diags. No "uboot>" prompt. What can I do next?

04-28-2021, 10:43 AM	#6
eddie.t.h Addict Posts: 201 Karma: 123456 Join Date: Jan 2018 Device: Too Much Kindle :-)	I had a similar case. For me, the solution was memory reballing. Unfortunately, to do this, you need to unstick the display, which of course ended up damaging it and replacing with a new one. Last edited by eddie.t.h; 04-28-2021 at 11:01 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
KT3 jailbreak 5.11.1.1	Nightsax	Amazon Kindle	4	07-23-2020 02:28 PM
KT3 can not jailbreak	littlebuster	Kindle Developer's Corner	6	01-23-2018 08:36 PM
[KT3]Can I `rm -fr /mnt/us/*`?	zaoqi	Kindle Developer's Corner	0	08-25-2017 10:56 AM
Dead Heroes Chronicles: King of the Dead. 30% OFF for the first week.	ja_valentine	Self-Promotions by Authors and Publishers	1	05-22-2012 02:27 PM

12-04-2020, 03:31 PM	#3
mad_maks Junior Member Posts: 9 Karma: 10 Join Date: Oct 2020 Device: G000K9 Kindle Basic 2 (2016) KT3	I'm sorry I still have no clue what to do. I've already purchased new battery (maybe it is battery realated problem). When I get it I will be diggin' more.

04-14-2021, 02:42 PM	#5
mad_maks Junior Member Posts: 9 Karma: 10 Join Date: Oct 2020 Device: G000K9 Kindle Basic 2 (2016) KT3	bump Anyone?

04-30-2021, 02:15 PM	#7
mad_maks Junior Member Posts: 9 Karma: 10 Join Date: Oct 2020 Device: G000K9 Kindle Basic 2 (2016) KT3	Oh that sounds bad Thank you for the info. I will try to use my hot air station.

Advert

Advert