Sunrise installation error

palmdoc · 01-19-2005, 03:07 AM

I am using a T5. Previously I've been using Plucker. Iam getting an "unable to register conduit" error at the end of installing Sunrise 0.4a
Anyone with a T5 succeeding in the installation or is it just me?
Perhaps it is a compatibility problem with Hotsync Manager 6.0?

Thanks

Laurens · 01-19-2005, 09:03 AM

Quote:

Originally Posted by palmdoc

I am using a T5. Previously I've been using Plucker. Iam getting an "unable to register conduit" error at the end of installing Sunrise 0.4a
Anyone with a T5 succeeding in the installation or is it just me?
Perhaps it is a compatibility problem with Hotsync Manager 6.0?

The conduit hasn't been tested for compatibility with HotSync Mgr 6.0 yet. I didn't even know that version was already available outside of the Conduit Development Kit distribution. Did it come with the T5 installation CD?

The conduit is not absolutely necessary for Sunrise to function.

palmdoc · 01-19-2005, 11:48 PM

Yes, it comes with the T5 installation CD. But another user says it can be. I installed it now with the Hotsync option unchecked and convert the links to a folder and then manually copy them over to my T5 using palmOne's File transfer.
I can't think of an easier way

manuel · 01-25-2005, 08:44 AM

Hello, I have the same problem as you and a do it the same way (though with version 0.34 it worked).
I don't mind doing the sincronization this way, what I am concerned now is to install the downloades files in the internal drive.
The problem is that the Plucker doesn't update the document list from the internal drive. Is there any solution?

Manuel

Laurens · 01-25-2005, 09:41 AM

I looked into this and the problem is definitely not due to HotSync Mgr 6.0. I just installed the latest CDK on a clean machine and the conduit works fine. I know the conduit also works fine with the Treo650 (which comes with HotSync 6.0.)

This has something to do with the T|5 installation. Without an actual T|5 it's impossible to test, though, so I'm going to leave this as unresolved. The only thing I can think of is to do a complete reinstall of Palm Desktop.

Liqiud · 01-25-2005, 04:31 PM

I don't use any of these programs,
maybe I need to start

Alexander Turcic · 01-26-2005, 04:52 PM

Give Sunrise and Plucker a try, it is worth it!

rhlb · 02-05-2005, 03:59 PM

I am using a Tungsten T and I get the same error when installing Sunrise. Is there a way to install the conduit manually?

Laurens · 02-06-2005, 08:07 AM

You might want to try Sunrise 0.41b. The updated conduit in this version no longer depends on the MFC library.

sirocco_x · 02-08-2005, 08:40 AM

Same error though installed version 0.41b :-(
and in the install directory I don't find the sunrise stub so I cannot view the docs on my handheld with plucker...

regards

rhlb · 02-15-2005, 02:20 AM

Still can't get the hotsync conduit to install. I have found using the command line tool SunsetCL works great and have created a shortcut to a batch file in Scheduled tasks so that it automatically syncs with the internet when I want it too. Almost as good as hotsyncing

01-19-2005, 03:07 AM	#1
palmdoc Junior Member Posts: 9 Karma: 10 Join Date: Dec 2003 Device: Treo650/DexllAxim x50v	Sunrise installation error I am using a T5. Previously I've been using Plucker. Iam getting an "unable to register conduit" error at the end of installing Sunrise 0.4a Anyone with a T5 succeeding in the installation or is it just me? Perhaps it is a compatibility problem with Hotsync Manager 6.0? Thanks Last edited by palmdoc; 01-19-2005 at 03:24 AM.

01-25-2005, 08:44 AM	#4
manuel Junior Member Posts: 1 Karma: 10 Join Date: Jan 2005 Device: Tungsten T5	Are you able to instal files on your internal drive? Hello, I have the same problem as you and a do it the same way (though with version 0.34 it worked). I don't mind doing the sincronization this way, what I am concerned now is to install the downloades files in the internal drive. The problem is that the Plucker doesn't update the document list from the internal drive. Is there any solution? Manuel

02-15-2005, 02:20 AM	#11
rhlb Junior Member Posts: 3 Karma: 10 Join Date: Feb 2005 Device: Tungsten T	Hotsync Conduit Problem Still can't get the hotsync conduit to install. I have found using the command line tool SunsetCL works great and have created a shortcut to a batch file in Scheduled tasks so that it automatically syncs with the internet when I want it too. Almost as good as hotsyncing

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ERROR: Error: Error communicating with device	JWood	Calibre	10	04-20-2010 07:28 PM
Installation Error GLIB_2.9 not found	conryf	Calibre	7	04-05-2010 09:44 PM
Error code 2329 during installation	deb27	Calibre	1	01-22-2010 11:54 PM
Welcome/Installation	mikelv	EPUBReader	1	11-18-2009 10:41 AM
Error on installation of calibre 0.6.13	sleepyDragon	Calibre	5	09-22-2009 04:37 AM

01-19-2005, 11:48 PM	#3
palmdoc Junior Member Posts: 9 Karma: 10 Join Date: Dec 2003 Device: Treo650/DexllAxim x50v	Yes, it comes with the T5 installation CD. But another user says it can be. I installed it now with the Hotsync option unchecked and convert the links to a folder and then manually copy them over to my T5 using palmOne's File transfer. I can't think of an easier way

01-25-2005, 09:41 AM	#5
Laurens Jah Blessed Posts: 1,295 Karma: 1373 Join Date: Apr 2003 Location: The Netherlands Device: iPod Touch	I looked into this and the problem is definitely not due to HotSync Mgr 6.0. I just installed the latest CDK on a clean machine and the conduit works fine. I know the conduit also works fine with the Treo650 (which comes with HotSync 6.0.) This has something to do with the T\|5 installation. Without an actual T\|5 it's impossible to test, though, so I'm going to leave this as unresolved. The only thing I can think of is to do a complete reinstall of Palm Desktop.

01-25-2005, 04:31 PM	#6
Liqiud Infinite Oblivion Posts: 84 Karma: 25 Join Date: Jan 2005 Location: United States Device: Sony Clie PEG-UX50	I don't use any of these programs, maybe I need to start

01-26-2005, 04:52 PM	#7
Alexander Turcic Fully Converged Posts: 18,175 Karma: 14021202 Join Date: Oct 2002 Location: Switzerland Device: Too many to count here.	Give Sunrise and Plucker a try, it is worth it!

02-05-2005, 03:59 PM	#8
rhlb Junior Member Posts: 3 Karma: 10 Join Date: Feb 2005 Device: Tungsten T	I am using a Tungsten T and I get the same error when installing Sunrise. Is there a way to install the conduit manually?

02-06-2005, 08:07 AM	#9
Laurens Jah Blessed Posts: 1,295 Karma: 1373 Join Date: Apr 2003 Location: The Netherlands Device: iPod Touch	You might want to try Sunrise 0.41b. The updated conduit in this version no longer depends on the MFC library.

02-08-2005, 08:40 AM	#10
sirocco_x Junior Member Posts: 1 Karma: 10 Join Date: Feb 2005 Location: Austria Device: Tungsten T5	Same error though installed version 0.41b :-( and in the install directory I don't find the sunrise stub so I cannot view the docs on my handheld with plucker... regards

Advert

Advert