device connect problem

[István Gulyás]

Hi,
I have an old Wayteq ebook 60w device.I would like use it again, but my computer cannot recognise it .Could you help me please?
I copied datas of device:

calibre 5.2 [64bit] embedded-python: True is64bit: True
Windows-10-10.0.18362-SP0 Windows ('64bit', 'WindowsPE')
('Windows', '10', '10.0.18362')
Python 3.8.5
Windows: ('10', '10.0.18362', 'SP0', 'Multiprocessor Free')
Interface language: hu
USB devices on system:
(USBDevice(vendor_id=0x64e product_id=0xe330 bcd=0x100 devid=usb\vid_064e&pid_e330&rev_0100 devinst=3),
USBDevice(vendor_id=0x1ea7 product_id=0x10c0 bcd=0x200 devid=usb\vid_1ea7&pid_10c0&rev_0200 devinst=4),
USBDevice(vendor_id=None product_id=None bcd=None devid=usb\root_hub20&vid8086&pid9c26&rev0004 devinst=5),
USBDevice(vendor_id=0x64e product_id=0xe330 bcd=0x100 devid=usb\vid_064e&pid_e330&rev_0100&mi_00 devinst=7),
USBDevice(vendor_id=0x4ca product_id=0x300b bcd=0x1 devid=usb\vid_04ca&pid_300b&rev_0001 devinst=8),
USBDevice(vendor_id=0x5e3 product_id=0x726 bcd=0x222 devid=usb\vid_05e3&pid_0726&rev_0222 devinst=14),
USBDevice(vendor_id=None product_id=None bcd=None devid=usb\root_hub30&vid8086&pid9c31&rev0004 devinst=9),
USBDevice(vendor_id=0x8087 product_id=0x8000 bcd=0x4 devid=usb\vid_8087&pid_8000&rev_0004 devinst=10))

No disabled plugins
Looking for devices of type: MTP_DEVICE
The Windows WPD service says there are no portable devices connected

Looking for devices of type: SMART_DEVICE_APP
All IP addresses {'{8073CC6C-4885-4712-B13F-32F34FF2E328}': [{'addr': '192.168.1.83', 'netmask': '255.255.255.0', 'broadcast': '192.168.1.255'}], '{9DEA6D13-0A9A-41B5-ABCD-6DE312D1117F}': [{'addr': '192.168.137.1', 'netmask': '255.255.255.0', 'broadcast': '192.168.137.255'}], '{846EE342-7039-11DE-9D20-806E6F6E6963}': [{'addr': '127.0.0.1', 'netmask': '255.0.0.0', 'broadcast': '127.255.255.255'}]}
No device is connected

Looking for devices...
USBDevice(vendor_id=0x5e3 product_id=0x726 bcd=0x222 devid=usb\vid_05e3&pid_0726&rev_0222 devinst=14)
Detected possible device WAYTEQ

Devices possibly connected: WayteQ device interface,
Trying to open WayteQ device interface ... Storage number map:
{(7, 0): [(2, 'C')]}
Storage number map:
{(7, 0): [(2, 'C')]}
Drive letters for USBDevice(vendor_id=0x5e3 product_id=0x726 bcd=0x222 devid=usb\vid_05e3&pid_0726&rev_0222 devinst=14)
{'drive_letters': [],
'pnp_id_map': {},
'readonly_drives': set(),
'sort_map': {}}
failed
Opening of the following devices failed
<calibre.devices.misc.WAYTEQ object at 0x0000020597654D30>
Traceback (most recent call last):
File "calibre\devices\__init__.py", line 159, in debug
File "calibre\devices\usbms\device.py", line 823, in open
File "calibre\devices\usbms\device.py", line 275, in open_windows
calibre.devices.errors.DeviceError: Unable to detect any disk drives for the device: WayteQ xBook. Try rebooting

USB gyártó ID (hexában): 0x5e3
USB termék ID (hexában): 0x726
USB revízió ID (hexában): 0x222

[kovidgoyal]

If your computer is not able to mount it, there is nothing calibre can do. You have to get it to show up in iwndows explorer before calibre can connect to it.

[István Gulyás]

Thanks ,I try it