KOA Thanks for helping my KOA.

[rayang2004]

I accidentally ran the command "fastboot set var bootmode reset" to my KOA, and it fall into a reboot loop with back lightflashing three times quickly.The PC cannot recongnized the kindle device.
Any help?

[knc1]

Originally Posted by rayang2004

I accidentally ran the command "fastboot set var bootmode reset" to my KOA, and it fall into a reboot loop with back lightflashing three times quickly.The PC cannot recongnized the kindle device.
Any help?

That is 32 keystrokes, one hell of an "Accident".
What where you attempting to do?
What had you done prior to this 32 character "accident"?
We really need to know those answers before we can figure out how to "un-break" it.

[rayang2004]

Originally Posted by knc1

That is 32 keystrokes, one hell of an "Accident".
What where you attempting to do?
What had you done prior to this 32 character "accident"?
We really need to know those answers before we can figure out how to "un-break" it.

It's a "simple" thing. I logout my kindle account, found the entrance to kual gone and then I reinstalled it, and then it went blank, and I rebooted the kindle. After restart, because CRP is installed, it automatically enters diag mode. When trying to exit diag mode, it enters fastboot mode. After "fastboot setvar boootmode main" is disconnected, the computer will still enter diag mode. I think I will reset it and take it for granted that "fastboot setvar bootmode reset" is executed.

[knc1]

OR
Remove the USB cable when you restart it.
If you leave it connected, of course it will go to diag mode, you have CRP installed.

[rayang2004]

Originally Posted by knc1

OR
Remove the USB cable when you restart it.
If you leave it connected, of course it will go to diag mode, you have CRP installed.

Yes I removed the cable，but besause I “accidently” executed "fastboot setvar bootmode reset",it doesn't enter diags anymore.It fall in a reboot loop，with the screen flashes twice, then lights up for a few seconds

[knc1]

Originally Posted by rayang2004

Yes I removed the cable，but besause I “accidently” executed "fastboot setvar bootmode reset",it doesn't enter diags anymore.It fall in a reboot loop，with the screen flashes twice, then lights up for a few seconds

So put the cable back, see if CRP can catch it before it loops.

[rayang2004]

Originally Posted by knc1

So put the cable back, see if CRP can catch it before it loops.

no differences，restart the loop again，and I can't shutdown the kindle

[knc1]

Originally Posted by rayang2004

no differences，restart the loop again，and I can't shutdown the kindle

It __should__ stop by itself (it has a loop counter to stop it).
Evidently that isn't working either.
But you do not want to let it run the battery down, not good for the battery.


Two choices:
Keep it on a wall charger
or
Open it up and disconnect the battery.


Then you will have to wait for someone else to suggest what to do next.
I am out of ideas.

[rayang2004]

Originally Posted by knc1

It __should__ stop by itself (it has a loop counter to stop it).
Evidently that isn't working either.
But you do not want to let it run the battery down, not good for the battery.


Two choices:
Keep it on a wall charger
or
Open it up and disconnect the battery.


Then you will have to wait for someone else to suggest what to do next.
I am out of ideas.

Thanks.