Update - Android 4.4 for Kepler Pro

downeaster59 · 11-01-2017, 07:28 AM

I asked Booxtor and the folks at ereader.store if there was any progress on the Android 4.4 update for the Kepler Pro, and I offered to be a tester if that might be helpful. Booxtor sent me a link to a version of the beta firmware for the Kepler Pro that is 4.4. I installed it and tried it out.

The pros: touch response is good. Reading seems to work well. The switch from normal to A2 mode works well. Sleep mode seems to work.

The cons: WiFi will not start up. I tried to start WiFi in Settings/Network, and get the phrase "WiFi is starting", but nothing happens beyond that. I never get to the point where I can select my network. I am fine with beta firmware, but no WiFi is a no-go. Bluetooth does not work. The icons and text are smaller than they are in the stock firmware. Shutdown takes a long time.

Afterward, I reinstalled the stock firmware and WiFi worked once again. So, it's not a hardware problem.

I did not try to sideload apps.

So, there is progress. Once I can get WiFi to work on 4.4, I'll do more testing with the 4.4 firmware. I don't mind the rough edges of beta firmware, but I do need WiFi! Thanks to Booxtor and the team for taking this project on.

If anyone has any ideas as to how I could get WiFi to work, please pass them on.

khalleron · 11-01-2017, 07:27 PM

Thanks for testing it. The first eink device that gets Android 4.4 or higher to work will get my money.

downeaster59 · 11-01-2017, 08:17 PM

Onyx recently announced some new devices that may be available early in 2018, two of which will run Android 6.0! They are larger devices, though - 9.7 inch and up. I'll keep an eye on those. Maybe I'll get a revised version of the 4.4 Kepler Pro firmware before then. I really like the K-Pro. If it ran 4.4, it would be even better.

I'm told that the K-Pro, like most current E-Ink devices, can't handle anything newer than 4.4. These newer devices will have revised hardware so that they can run 6.0.

khalleron · 11-02-2017, 11:53 PM

Quote:

Originally Posted by downeaster59

Onyx recently announced some new devices that may be available early in 2018, two of which will run Android 6.0! They are larger devices, though - 9.7 inch and up. I'll keep an eye on those. Maybe I'll get a revised version of the 4.4 Kepler Pro firmware before then. I really like the K-Pro. If it ran 4.4, it would be even better.

I'm told that the K-Pro, like most current E-Ink devices, can't handle anything newer than 4.4. These newer devices will have revised hardware so that they can run 6.0.

Yes, but I really prefer something 7" or smaller. I might bite the bullet and get the larger device if there's no other choices, but I would really like better choices!

downeaster59 · 11-03-2017, 06:36 AM

Quote:

Originally Posted by khalleron

Yes, but I really prefer something 7" or smaller. I might bite the bullet and get the larger device if there's no other choices, but I would really like better choices!

Totally agree. I wouldn't want anything bigger than 7 inches for an eReader. In fact, I once had a Kobo Aura HD (6.8 inches). It was a very good device, but even then, I found myself going back to six inches. It feels just right. On the other hand, a smartphone screen is too small (unless you have a huge phone!).

If I get a newer 4.4 beta firmware from Booxtor that has working WiFi, I'll be happy - and pass on the news when it happens.

downeaster59 · 11-03-2017, 01:00 PM

Barnes & Noble is offering the new Nook Glowlight 3. Available on November 8, it runs Android 4.4.2. B&N says that this device isn't designed to install apps or run Google Play. However, their previous device, the Glowlight Plus, also ran 4.4 - and some folks found a way to install apps on it. So, stay tuned.

Dr. Drib · 11-03-2017, 03:25 PM

Quote:

Originally Posted by downeaster59

Barnes & Noble is offering the new Nook Glowlight 3. Available on November 8, it runs Android 4.4.2. B&N says that this device isn't designed to install apps or run Google Play. However, their previous device, the Glowlight Plus, also ran 4.4 - and some folks found a way to install apps on it. So, stay tuned.

Where have you been, amigo?

There's a whole NEWS thread on this very topic, which I will now provide because I'm a really, really, really nice guy.

https://www.mobileread.com/forums/sh...d.php?t=291759

downeaster59 · 11-03-2017, 03:56 PM

Quote:

Originally Posted by Dr. Drib

Where have you been, amigo?

There's a whole NEWS thread on this very topic, which I will now provide because I'm a really, really, really nice guy.

https://www.mobileread.com/forums/sh...d.php?t=291759

Thank you much! You might have noticed that I posted in that thread... I thought I'd tell you because you are a really, really nice guy (I bet even Jon thinks so!) and I wouldn't want you to be embarrassed!

Dr. Drib · 11-03-2017, 04:29 PM

Quote:

Originally Posted by downeaster59

Thank you much! You might have noticed that I posted in that thread... I thought I'd tell you because you are a really, really nice guy (I bet even Jon thinks so!) and I wouldn't want you to be embarrassed!

Thanks!

khalleron · 11-03-2017, 07:31 PM

The deciding factor will be if it can run Hoopla.

mdp · 11-04-2017, 03:22 AM

Quote:

Originally Posted by khalleron

The deciding factor will be if it can run Hoopla.

According to Google, it must work even on older versions of Android, like FroYo:

Quote:

Hoopla Froyo! Frozen Yogurt - We have the best bottoms in town!
Hoopla Froyo! is a frozen yogurt store, serving multiple locations throughout New York!
hooplafroyo.com

khalleron · 11-06-2017, 04:11 PM

Quote:

Originally Posted by mdp

According to Google, it must work even on older versions of Android, like FroYo:

No, I am not sticking my ereader in a bowl of frozen yogurt.

downeaster59 · 11-17-2017, 07:03 PM

Quote:

Originally Posted by khalleron

No, I am not sticking my ereader in a bowl of frozen yogurt.

You mentioned that you wanted to run the Hoopla app. This is on the Nook Glowlight 3. Is this the app you mean?

khalleron · 11-26-2017, 10:17 PM

Quote:

Originally Posted by downeaster59

You mentioned that you wanted to run the Hoopla app. This is on the Nook Glowlight 3. Is this the app you mean?

Yes, it is. Does the NG3 run Android 4.4? Would I have to root it?

downeaster59 · 11-27-2017, 07:21 AM

Quote:

Originally Posted by khalleron

Yes, it is. Does the NG3 run Android 4.4? Would I have to root it?

Yes, the NG3 runs Android 4.4.2. You don't have to root it to install apps. You do need to enable ADB on your desktop/laptop and USB debugging on the NG3. Then, install an Android launcher on the NG3 (so you can see the apps you install after) and then Hoopla (and any other app) by using ADB install, with the NG3 connected by USB to your desktop/laptop.

That may be more bother than you want. But if you decide to buy the NG3, I (and others, no doubt) would be willing to help you set that up.

I should add that I did not actually set up and run Hoopla, so I don't know how well it runs on the NG3. I suspect it will run okay, though it might be a little slower than it would be on a typical Android tablet.

11-01-2017, 07:28 AM	#1
downeaster59 Wizard Posts: 1,251 Karma: 2957301 Join Date: Apr 2014 Location: Rochester, NY Device: Boox Go 10.3, Kobo Libra 2	Update - Android 4.4 for Kepler Pro I asked Booxtor and the folks at ereader.store if there was any progress on the Android 4.4 update for the Kepler Pro, and I offered to be a tester if that might be helpful. Booxtor sent me a link to a version of the beta firmware for the Kepler Pro that is 4.4. I installed it and tried it out. The pros: touch response is good. Reading seems to work well. The switch from normal to A2 mode works well. Sleep mode seems to work. The cons: WiFi will not start up. I tried to start WiFi in Settings/Network, and get the phrase "WiFi is starting", but nothing happens beyond that. I never get to the point where I can select my network. I am fine with beta firmware, but no WiFi is a no-go. Bluetooth does not work. The icons and text are smaller than they are in the stock firmware. Shutdown takes a long time. Afterward, I reinstalled the stock firmware and WiFi worked once again. So, it's not a hardware problem. I did not try to sideload apps. So, there is progress. Once I can get WiFi to work on 4.4, I'll do more testing with the 4.4 firmware. I don't mind the rough edges of beta firmware, but I do need WiFi! Thanks to Booxtor and the team for taking this project on. If anyone has any ideas as to how I could get WiFi to work, please pass them on.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Android 4.4 for Kepler Pro?	downeaster59	Onyx Boox	51	01-22-2019 05:56 AM
Button/Firmware/Kepler Pro question	Hrafn	Onyx Boox	1	08-03-2017 02:17 AM
Touch HD vs. Kepler Pro vs. C67ML vs. inkbook prime vs. suggestions?	iacchi	Which one should I buy?	19	04-28-2017 01:16 AM
Onyx Boox Kepler Pro Updates and Information	Hrafn	Onyx Boox	6	12-26-2016 12:53 AM
Onyx Kepler Pro or Kobo Aura One?	RamonR	Which one should I buy?	5	09-25-2016 04:55 PM

11-01-2017, 07:27 PM	#2
khalleron Kate Posts: 1,700 Karma: 3605799 Join Date: Mar 2009 Location: Oregon, United States Device: MeeBook, Kobo Libra Colour	Thanks for testing it. The first eink device that gets Android 4.4 or higher to work will get my money.

11-01-2017, 08:17 PM	#3
downeaster59 Wizard Posts: 1,251 Karma: 2957301 Join Date: Apr 2014 Location: Rochester, NY Device: Boox Go 10.3, Kobo Libra 2	Onyx recently announced some new devices that may be available early in 2018, two of which will run Android 6.0! They are larger devices, though - 9.7 inch and up. I'll keep an eye on those. Maybe I'll get a revised version of the 4.4 Kepler Pro firmware before then. I really like the K-Pro. If it ran 4.4, it would be even better. I'm told that the K-Pro, like most current E-Ink devices, can't handle anything newer than 4.4. These newer devices will have revised hardware so that they can run 6.0.

11-03-2017, 01:00 PM	#6
downeaster59 Wizard Posts: 1,251 Karma: 2957301 Join Date: Apr 2014 Location: Rochester, NY Device: Boox Go 10.3, Kobo Libra 2	Barnes & Noble is offering the new Nook Glowlight 3. Available on November 8, it runs Android 4.4.2. B&N says that this device isn't designed to install apps or run Google Play. However, their previous device, the Glowlight Plus, also ran 4.4 - and some folks found a way to install apps on it. So, stay tuned.

11-03-2017, 07:31 PM	#10
khalleron Kate Posts: 1,700 Karma: 3605799 Join Date: Mar 2009 Location: Oregon, United States Device: MeeBook, Kobo Libra Colour	The deciding factor will be if it can run Hoopla.

Advert

Advert