Calibre on Slackware from Windows using Xming

elMoco · 08-13-2017, 06:48 AM

Hi all,

I've been using a Windows laptop as a terminal form my Linux server for several years. I have installed Xming and everithing seems to work fine.

But lately Calibre doesn´t work.

It used to work fine untile few weeks ago, but now I am geting this message all the time:

Code:

jesusm@liet:~/log$ (export DISPLAY=192.168.1.39:0.0 & calibre)
failed to get the current screen resources
QXcbConnection: XCB error: 170 (Unknown), sequence: 170, resource id: 90, major code: 146 (Unknown), minor code: 20
The X11 connection broke: I/O error (code 1)
XIO:  fatal IO error 2 (No existe el fichero o el directorio) on X server "192.168.1.39:0"
      after 349 requests (349 known processed) with 0 events remaining.
jesusm@liet:~/log$

Yes, I know it seems that the problem is with the X server, but any other application works fine. using exactly the same command to run. SO I think that maybe it is a problem with some new Calibre update.

Any idea?

Thanks
JM

kovidgoyal · 08-13-2017, 09:11 AM

This will be an incompatibility between Qt 5.6 (which calibre 3.x uses and the X server implementation). You can stick with calibre 2.85.1 which uses an older version of Qt.

elMoco · 08-13-2017, 10:56 AM

Oh! Thanks! It is working now with 2.85.

Thanks!

08-13-2017, 06:48 AM	#1
elMoco Member Posts: 14 Karma: 10 Join Date: May 2012 Device: Kindle Paperwhite	Calibre on Slackware from Windows using Xming Hi all, I've been using a Windows laptop as a terminal form my Linux server for several years. I have installed Xming and everithing seems to work fine. But lately Calibre doesn´t work. It used to work fine untile few weeks ago, but now I am geting this message all the time: Code: jesusm@liet:~/log$ (export DISPLAY=192.168.1.39:0.0 & calibre) failed to get the current screen resources QXcbConnection: XCB error: 170 (Unknown), sequence: 170, resource id: 90, major code: 146 (Unknown), minor code: 20 The X11 connection broke: I/O error (code 1) XIO: fatal IO error 2 (No existe el fichero o el directorio) on X server "192.168.1.39:0" after 349 requests (349 known processed) with 0 events remaining. jesusm@liet:~/log$ Yes, I know it seems that the problem is with the X server, but any other application works fine. using exactly the same command to run. SO I think that maybe it is a problem with some new Calibre update. Any idea? Thanks JM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to get Calibre from Windows 7 to Windows 10	polli	Calibre	15	08-11-2016 06:34 AM
Windows Calibre - normal Windows vs 64bit Windows	midnightmaze	Calibre	8	05-30-2015 08:16 AM
Moving Calibre Library from Windows 7 to Windows 8 - json code issue	DramaQueenLucy	Devices	14	11-12-2013 12:47 PM
EPUB Audio works on Calibre Mac but not Calibre Windows	BrianHanifin	Devices	3	10-21-2012 10:32 PM
Switching from Calibre Windows to Calibre Portable	Philip36Fld	Devices	0	04-06-2012 09:48 PM

08-13-2017, 09:11 AM	#2
kovidgoyal creator of calibre Posts: 45,690 Karma: 28549304 Join Date: Oct 2006 Location: Mumbai, India Device: Various	This will be an incompatibility between Qt 5.6 (which calibre 3.x uses and the X server implementation). You can stick with calibre 2.85.1 which uses an older version of Qt.

08-13-2017, 10:56 AM	#3
elMoco Member Posts: 14 Karma: 10 Join Date: May 2012 Device: Kindle Paperwhite	Oh! Thanks! It is working now with 2.85. Thanks!

Advert