Losing TOC function when I convert LIT to LRF

Falbe Publishing · 08-29-2008, 04:18 PM

Suddenly with Calibre I am not able to produce a functioning table of contents on the resulting LRF ebook when I start with a LIT ebook. The TOC in the LIT ebook is functioning, but the TOC in the LRF conversion does not work. When I test it on my Sony, the TOC items are listed on the TOC screen but clicking them does not take me to the chapter. It just goes to the first page of the TOC.

A couple weeks ago, I did successfully make LRF ebooks with functioning TOCs from LIT files.

Yes, I am checking the box "Add chapters to TOC."

Any ideas on why it does not work anymore?

JSWolf · 08-29-2008, 04:20 PM

When you convert LIT to LRF, try using the --use-spine option and see if it works. Also try using --add-chapters-to-toc and see what happens.

Falbe Publishing · 08-29-2008, 04:42 PM

Where's the use-spine option? I can't find it.

kovidgoyal · 08-29-2008, 04:43 PM

--use-spine wont help (its automatically set for LIT file anyway). THere's probably something in the way the TOC is setup in that lit file that's causing the problem. Open a ticket about it and I'll take a look.

JSWolf · 08-29-2008, 04:44 PM

And attach the LIT file.

Falbe Publishing · 08-29-2008, 04:55 PM

Quote:

Originally Posted by kovidgoyal

--use-spine wont help (its automatically set for LIT file anyway). THere's probably something in the way the TOC is setup in that lit file that's causing the problem. Open a ticket about it and I'll take a look.

Thanks for helping. You're so nice. Not sure how to open a ticket, and I can't attack a LIT file here. Where should I go?

Should I try downloading and installing calibre again. I had a notice about some update the other day, but I ignored it. Sorry. Maybe I needed it.

Falbe Publishing · 08-29-2008, 05:08 PM

I haven't tested it yet, but my intuition is crackling.

Anyway, I'm not getting a functioning TOC in the LRF because in the original Word doc where I built the TOC that was in the LIT file I did not use page numbers. So, even though the LIT file works, Calibre did not have what it needed to create a functioning TOC.

I'm sure this is the problem because this is the difference between the ebooks that came out of Calibre with functioning TOCs and those that didn't.

MY bad.

JSWolf · 08-29-2008, 05:32 PM

Please let us know if this really is the issue once you have it working.

=X= · 08-29-2008, 06:43 PM

When using the WordRMR(a word plugin) to create the LIT file and I also have noticed the same problem. When I expanded the LIT created by WordRMR file I saw there was only one html file and no TOC HTML in the lit file, typically LIT files have 2 or more html files. One is the main eBook text the second is the TOC.. I'm not sure if Calibre uses the additional file to create an external TOC, but I suspect it does.

What would be nice is if CALIBRE could create a TOC from a LIT by searching through the main HTML file.

=X=

kovidgoyal · 08-29-2008, 07:34 PM

You can opena ticket at

http://calibre.kovidgoyal.net/newticket

@ ==X==

calibre gets the TOC from the OPF file (part of the lit file). If the lit file doesn't have an OPF file, or the OPF file is missing a TOC section, then it wont automatically create a TOC. You have to use one of the chapter detection options to tell calibre how to figure out what should go into the TOC from the HTML

=X= · 08-29-2008, 11:06 PM

@ kovidgoyal
Thanks that did the trick.

Setting "a,name,_Toc*"

In the "Detect chapter at tag TAG:" text box worked.

=X=

=X= · 08-30-2008, 12:21 AM

kovidgoyal, Is there any way to disable page breaks getting auto inserted before the chapter detect? I've already have my page breaks in my document. So using the Chapter detect causes two page two page breaks in the eBook

Thanks in advance,
=X=

kovidgoyal · 08-30-2008, 12:41 AM

No there isn't

08-29-2008, 04:18 PM	#1
Falbe Publishing Gadget Slave Posts: 264 Karma: 600001 Join Date: Jun 2008 Location: Battle Creek, Michigan Device: Sony PRS505SC	Losing TOC function when I convert LIT to LRF Suddenly with Calibre I am not able to produce a functioning table of contents on the resulting LRF ebook when I start with a LIT ebook. The TOC in the LIT ebook is functioning, but the TOC in the LRF conversion does not work. When I test it on my Sony, the TOC items are listed on the TOC screen but clicking them does not take me to the chapter. It just goes to the first page of the TOC. A couple weeks ago, I did successfully make LRF ebooks with functioning TOCs from LIT files. Yes, I am checking the box "Add chapters to TOC." Any ideas on why it does not work anymore?

08-29-2008, 05:08 PM	#7
Falbe Publishing Gadget Slave Posts: 264 Karma: 600001 Join Date: Jun 2008 Location: Battle Creek, Michigan Device: Sony PRS505SC	UPDATE: I think I know what the problem is... I haven't tested it yet, but my intuition is crackling. Anyway, I'm not getting a functioning TOC in the LRF because in the original Word doc where I built the TOC that was in the LIT file I did not use page numbers. So, even though the LIT file works, Calibre did not have what it needed to create a functioning TOC. I'm sure this is the problem because this is the difference between the ebooks that came out of Calibre with functioning TOCs and those that didn't. MY bad.

08-30-2008, 12:21 AM	#12
=X= Wizard Posts: 3,671 Karma: 12205348 Join Date: Mar 2008 Device: Galaxy S, Nook w/CM7	kovidgoyal, Is there any way to disable page breaks getting auto inserted before the chapter detect? I've already have my page breaks in my document. So using the Chapter detect causes two page two page breaks in the eBook Thanks in advance, =X= Last edited by =X=; 08-30-2008 at 12:24 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Making a TOC for LRFs? Issues with Calibre + LRF TOC editor not working	Magitek	LRF	0	05-06-2009 01:25 PM
[Old Thread] unable to convert ebooks(rtf, txt,lit,html,pdf) to lrf in calibre .4.131	jackdeth191	Calibre	9	05-02-2009 02:55 AM
? convert .pdb to .lit or .lrf	Maggiet	Workshop	3	05-18-2008 04:44 PM
Any way to batch convert LIT to LRF that saves to hard drive?	erikk	Sony Reader	2	01-03-2008 03:51 AM
Using Book Designer to convert Lit to Lrf?	Gibbo	Sony Reader	11	07-22-2007 10:33 AM

08-29-2008, 04:20 PM	#2
JSWolf Resident Curmudgeon Posts: 79,247 Karma: 145488788 Join Date: Nov 2006 Location: Roslindale, Massachusetts Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3	When you convert LIT to LRF, try using the --use-spine option and see if it works. Also try using --add-chapters-to-toc and see what happens.

08-29-2008, 04:42 PM	#3
Falbe Publishing Gadget Slave Posts: 264 Karma: 600001 Join Date: Jun 2008 Location: Battle Creek, Michigan Device: Sony PRS505SC	Where's the use-spine option? I can't find it.

08-29-2008, 04:43 PM	#4
kovidgoyal creator of calibre Posts: 45,219 Karma: 27110894 Join Date: Oct 2006 Location: Mumbai, India Device: Various	--use-spine wont help (its automatically set for LIT file anyway). THere's probably something in the way the TOC is setup in that lit file that's causing the problem. Open a ticket about it and I'll take a look.

08-29-2008, 04:44 PM	#5
JSWolf Resident Curmudgeon Posts: 79,247 Karma: 145488788 Join Date: Nov 2006 Location: Roslindale, Massachusetts Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3	And attach the LIT file.

08-29-2008, 05:32 PM	#8
JSWolf Resident Curmudgeon Posts: 79,247 Karma: 145488788 Join Date: Nov 2006 Location: Roslindale, Massachusetts Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3	Please let us know if this really is the issue once you have it working.

08-29-2008, 06:43 PM	#9
=X= Wizard Posts: 3,671 Karma: 12205348 Join Date: Mar 2008 Device: Galaxy S, Nook w/CM7	When using the WordRMR(a word plugin) to create the LIT file and I also have noticed the same problem. When I expanded the LIT created by WordRMR file I saw there was only one html file and no TOC HTML in the lit file, typically LIT files have 2 or more html files. One is the main eBook text the second is the TOC.. I'm not sure if Calibre uses the additional file to create an external TOC, but I suspect it does. What would be nice is if CALIBRE could create a TOC from a LIT by searching through the main HTML file. =X=

08-29-2008, 07:34 PM	#10
kovidgoyal creator of calibre Posts: 45,219 Karma: 27110894 Join Date: Oct 2006 Location: Mumbai, India Device: Various	You can opena ticket at http://calibre.kovidgoyal.net/newticket @ ==X== calibre gets the TOC from the OPF file (part of the lit file). If the lit file doesn't have an OPF file, or the OPF file is missing a TOC section, then it wont automatically create a TOC. You have to use one of the chapter detection options to tell calibre how to figure out what should go into the TOC from the HTML

08-29-2008, 11:06 PM	#11
=X= Wizard Posts: 3,671 Karma: 12205348 Join Date: Mar 2008 Device: Galaxy S, Nook w/CM7	@ kovidgoyal Thanks that did the trick. Setting "a,name,_Toc*" In the "Detect chapter at tag TAG:" text box worked. =X=

08-30-2008, 12:41 AM	#13
kovidgoyal creator of calibre Posts: 45,219 Karma: 27110894 Join Date: Oct 2006 Location: Mumbai, India Device: Various	No there isn't

Advert

Advert