Kindle can't start after entering DIAG mode

Mr.Samuel · 05-16-2016, 11:41 PM

My Kindle can't start after press "fastboot bundle install" in DIAG mode, and can't start even press the power key in 30 seconds

Mr.Samuel · 05-17-2016, 12:16 AM

By the way, how to change the Kindle's MAC address?

knc1 · 05-17-2016, 03:03 AM

What device?
What firmware version?

What do you mean by "Can't start"?

What are you trying to achieve?

HarryT · 05-17-2016, 03:05 AM

There is no legitimate reason for wanting to change the MAC address of a Kindle other than to try to defeat blacklisting. Our forum policies prohibit providing such assistance.

Mr.Samuel · 05-17-2016, 07:45 AM

My device is Kindle PaperWhite 2 with 5.4.5.1 firmware
I installed the Coward's rescue pack and entered the diag mode.
After that, I pressed the "MISC individual test -> fastboot bundle install " by mistake.
Then the device showed the "Amazon Kindle "logo and" DIAGS EXIT " information, I think the Kindle entered fastboot mode.
I just find out how to exit the fastboot mode of Kindle PaperWhite 2.

geekmaster · 05-17-2016, 08:28 AM

Quote:

Originally Posted by Mr.Samuel

My device is Kindle PaperWhite 2 with 5.4.5.1 firmware
I installed the Coward's rescue pack and entered the diag mode.
After that, I pressed the "MISC individual test -> fastboot bundle install " by mistake.
Then the device showed the "Amazon Kindle "logo and" DIAGS EXIT " information, I think the Kindle entered fastboot mode.
I just find out how to exit the fastboot mode of Kindle PaperWhite 2.

You need to set the idme bootmode var back to main. You set it to fastboot mode, so you must use the fastboot tool to make that change. Until said change, it will boot to fastboot mode.

EDIT: Or use MfgTool (Select Boot thread) or a similar tool to temporarily boot to another mode where you can more easily change the idme bootmode var.

eschwartz · 05-17-2016, 12:14 PM

Quote:

Originally Posted by HarryT

There is no legitimate reason for wanting to change the MAC address of a Kindle other than to try to defeat blacklisting. Our forum policies prohibit providing such assistance.

Blacklisting relies on the device serial number, not the MAC address.

It should be identical to the way you spoof your MAC address on any standard desktop operating system (the Kindles run linux under the hood):
http://www.howtogeek.com/192173/how-...linux-and-mac/

It isn't particularly useful unless you are afraid you are being tracked via your MAC address.

Mr.Samuel · 05-17-2016, 02:26 PM

Quote:

Originally Posted by geekmaster

You need to set the idme bootmode var back to main. You set it to fastboot mode, so you must use the fastboot tool to make that change. Until said change, it will boot to fastboot mode.

EDIT: Or use MfgTool (Select Boot thread) or a similar tool to temporarily boot to another mode where you can more easily change the idme bootmode var.

I connected the Kindle in fastboot mode on a computer running Windows, but the computer recognized it as an Android device, and the Mfgtool can't work. So I'll try to exit the fastboot on a Linux virtual machine.

Can Yifanlu's "Fastboot-Kindle" tool work with Kindle paperwhite 2?

knc1 · 05-17-2016, 02:44 PM

Quote:

Originally Posted by Mr.Samuel

- - - -
I'll try to exit the fastboot on a Linux virtual machine.
- - -

We have a name for that here, KUBRICK (which is a LiveCD, not a VM image).

The grayscale Kindle's fastboot should be one of the included utilities.

You don't want to run the Wizard (it doesn't support the PW-2) -
Just escape to the command line instead.

And
We have a thread here about un-bricking a Kindle using fastboot -
So you should find references there on where to get the **correct** fastboot.

Mr.Samuel · 05-17-2016, 03:23 PM

Quote:

Originally Posted by knc1

And
We have a thread here about un-bricking a Kindle using fastboot -
So you should find references there on where to get the **correct** fastboot.

Where can I find the thread?

knc1 · 05-17-2016, 05:15 PM

Quote:

Originally Posted by Mr.Samuel

Where can I find the thread?

4th sticky down from the top of the page.
At least until someone makes another post in the sticky section.

Mr.Samuel · 05-18-2016, 02:07 AM

Quote:

Originally Posted by knc1

We have a name for that here, KUBRICK (which is a LiveCD, not a VM image).

The grayscale Kindle's fastboot should be one of the included utilities.

You don't want to run the Wizard (it doesn't support the PW-2) -
Just escape to the command line instead.

And
We have a thread here about un-bricking a Kindle using fastboot -
So you should find references there on where to get the **correct** fastboot.

I have used the KUBRICK LiveCD, and what command should I use to change the fastboot mode to MAIN?

knc1 · 05-18-2016, 08:03 AM

fastboot --help ??

and/or

read the 'de-bricking with fastboot' thread which you where told to look at - which includes a list of the fastboot commands.

Mr.Samuel · 05-21-2016, 12:05 AM

Thanks, I have successfully exited the fastboot mode on Linux .
By the way, how to operate in diag mode on a computer without serial port?

HarryT · 05-21-2016, 05:01 AM

Quote:

Originally Posted by Mr.Samuel

By the way, how to operate in diag mode on a computer without serial port?

You can't. If your computer doesn't have a serial port (and virtually none do these days), you'll need to get a USB serial port adapter.

05-16-2016, 11:41 PM	#1
Mr.Samuel Connoisseur Posts: 69 Karma: 10 Join Date: May 2016 Location: Gold Town Device: kindle paperwhite 3, kindle oasis 2	Kindle can't start after entering DIAG mode My Kindle can't start after press "fastboot bundle install" in DIAG mode, and can't start even press the power key in 30 seconds

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Does pw2 have a diag mode like kinde4?	cxy560	Kindle Developer's Corner	1	02-04-2014 03:58 AM
sshd will not start in usbnetwork mode	alethiophile	Kindle Developer's Corner	9	01-25-2014 10:36 AM
Kindle 4 frozen on system diag	radiofishlips	Kindle Developer's Corner	8	12-14-2012 01:13 AM
Kindle Touch bricked in diag mode	tommytomtom	Kindle Developer's Corner	3	09-05-2012 12:17 PM
Re-entering USB drive mode?	Rod Whiteley	Kindle Developer's Corner	16	05-30-2012 01:42 PM

05-17-2016, 12:16 AM	#2
Mr.Samuel Connoisseur Posts: 69 Karma: 10 Join Date: May 2016 Location: Gold Town Device: kindle paperwhite 3, kindle oasis 2	By the way, how to change the Kindle's MAC address?

05-17-2016, 03:03 AM	#3
knc1 Going Viral Posts: 17,212 Karma: 18210809 Join Date: Feb 2012 Location: Central Texas Device: No K1, PW2, KV, KOA	What device? What firmware version? What do you mean by "Can't start"? What are you trying to achieve?

05-17-2016, 03:05 AM	#4
HarryT eBook Enthusiast Posts: 85,544 Karma: 93383099 Join Date: Nov 2006 Location: UK Device: Kindle Oasis 2, iPad Pro 10.5", iPhone 6	There is no legitimate reason for wanting to change the MAC address of a Kindle other than to try to defeat blacklisting. Our forum policies prohibit providing such assistance.

05-17-2016, 07:45 AM	#5
Mr.Samuel Connoisseur Posts: 69 Karma: 10 Join Date: May 2016 Location: Gold Town Device: kindle paperwhite 3, kindle oasis 2	My device is Kindle PaperWhite 2 with 5.4.5.1 firmware I installed the Coward's rescue pack and entered the diag mode. After that, I pressed the "MISC individual test -> fastboot bundle install " by mistake. Then the device showed the "Amazon Kindle "logo and" DIAGS EXIT " information, I think the Kindle entered fastboot mode. I just find out how to exit the fastboot mode of Kindle PaperWhite 2.

05-18-2016, 08:03 AM	#13
knc1 Going Viral Posts: 17,212 Karma: 18210809 Join Date: Feb 2012 Location: Central Texas Device: No K1, PW2, KV, KOA	fastboot --help ?? and/or read the 'de-bricking with fastboot' thread which you where told to look at - which includes a list of the fastboot commands.

05-21-2016, 12:05 AM	#14
Mr.Samuel Connoisseur Posts: 69 Karma: 10 Join Date: May 2016 Location: Gold Town Device: kindle paperwhite 3, kindle oasis 2	Thanks, I have successfully exited the fastboot mode on Linux . By the way, how to operate in diag mode on a computer without serial port?

Advert

Advert