boyue t62 not starting up and continues boot loop

kozak776 · 08-23-2015, 12:05 PM

I apologazie for posting twice hopefully someone can help me with resurecting my boyue t62d.
The problem im facing was complitly my own doing I was upgrading firmawere on my boyue t62d and upgrade went ok then i rooted device and let myself go with titanium backup i have frozen too many android services and when i try to restart it it went into continues bootloop. i was trying to flash it with the firmare tools but it is not showing device connected same thing with fast adb no device is shown. if anyone can help and tell me how do i put boyue t62d into recovery so i could flash it again and it could be seen in adb when i put adb devices command in cmd .im running win7 64 bit if someone can get me out of this mess i created i promise to leave boyue t62d alone and not mess with her fimware no more . thank you in advance for any help.

JNT · 08-23-2015, 05:03 PM

I also got myself into a similar situation by playing around with too many firmwares without fully understanding the process.

The threads that helped me:
1: https://www.mobileread.com/forums/sho...d.php?t=254042

Especially RK 2.1 tool (first post)

2: https://www.mobileread.com/forums/sho...d.php?t=245888

Especially point 6. BUT I used the tool mentioned above (middle tab - "Upgrade Firmware") to flash the full firmware image file.

OR if you can still use adb: "adb boot boot-loader" and then only flash the system.img with the first tab ("Download Image")

OR when the reader is switched off. Hold the refresh button in for 8 seconds and then insert the usb cable (this should get it in "boot-loader" mode)

OR on some firmware if you keep both the refresh and power buttons pressed it enters "download or boot-loader" mode.

Hope this helps...

kozak776 · 08-23-2015, 05:48 PM

thanks for your input and the tips .i try them later today im still at work cant do much at work.

kozak776 · 08-24-2015, 12:49 AM

jnt thanks for your help your tips worked im back to stock on my boyou t62d.

Dr. Drib · 08-24-2015, 11:47 AM

Other double posted thread deleted.

Please do not double post. Mobileread considers that a form of spam.

For YOUR CONVENIENCE, a link to our Posting Guidelines is located at the very bottom of every page.

Don
(Moderator)

Purple Lady · 08-24-2015, 08:50 PM

I had my T62B in a boot loop as well and it couldn't be turned off. Hubby messed with it and got it in the proper mode by pressing the refresh button and using a pin in the reset hole while usb connected. I used the RK batch tool in the first post here https://www.mobileread.com/forums/sho...d.php?t=245888 I applied the latest update after and it now uses 45% battery in 24 hours so I have more work to do. But at least I'm not boot looping anymore

kozak776 · 08-24-2015, 09:34 PM

the tip about refresher button to hold it for 8 sec did the trick for me .I'm running the Energy eReader Pro + firmware 2.0.0B from last month on my reader. I rooted it and installed titanium back up and froze few services that were running in the background its great Energy eReader Pro + firmware 2.0.0B and the android services I froze giving me some good battery life.

08-23-2015, 12:05 PM	#1
kozak776 Junior Member Posts: 8 Karma: 10 Join Date: Nov 2010 Device: pb360	boyue t62 not starting up and continues boot loop I apologazie for posting twice hopefully someone can help me with resurecting my boyue t62d. The problem im facing was complitly my own doing I was upgrading firmawere on my boyue t62d and upgrade went ok then i rooted device and let myself go with titanium backup i have frozen too many android services and when i try to restart it it went into continues bootloop. i was trying to flash it with the firmare tools but it is not showing device connected same thing with fast adb no device is shown. if anyone can help and tell me how do i put boyue t62d into recovery so i could flash it again and it could be seen in adb when i put adb devices command in cmd .im running win7 64 bit if someone can get me out of this mess i created i promise to leave boyue t62d alone and not mess with her fimware no more . thank you in advance for any help.

08-23-2015, 05:03 PM	#2
JNT Connoisseur Posts: 53 Karma: 18986 Join Date: May 2012 Location: Sweden Device: KT / K4NT / T62D / T68	some suggestions I also got myself into a similar situation by playing around with too many firmwares without fully understanding the process. The threads that helped me: 1: https://www.mobileread.com/forums/sho...d.php?t=254042 Especially RK 2.1 tool (first post) 2: https://www.mobileread.com/forums/sho...d.php?t=245888 Especially point 6. BUT I used the tool mentioned above (middle tab - "Upgrade Firmware") to flash the full firmware image file. OR if you can still use adb: "adb boot boot-loader" and then only flash the system.img with the first tab ("Download Image") OR when the reader is switched off. Hold the refresh button in for 8 seconds and then insert the usb cable (this should get it in "boot-loader" mode) OR on some firmware if you keep both the refresh and power buttons pressed it enters "download or boot-loader" mode. Hope this helps...

08-24-2015, 08:50 PM	#6
Purple Lady Grand Sorcerer Posts: 5,698 Karma: 16542228 Join Date: Feb 2010 Location: Pennsylvania Device: Huawei MediaPad M5, LG V30, Boyue T80S, Nexus 7 LTE, K3 3G, Fire HD8	I had my T62B in a boot loop as well and it couldn't be turned off. Hubby messed with it and got it in the proper mode by pressing the refresh button and using a pin in the reset hole while usb connected. I used the RK batch tool in the first post here https://www.mobileread.com/forums/sho...d.php?t=245888 I applied the latest update after and it now uses 45% battery in 24 hours so I have more work to do. But at least I'm not boot looping anymore Last edited by Purple Lady; 08-24-2015 at 08:57 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boyue T62+ Screen stuck	RedShadow	Android Developer's Corner	12	10-10-2015 04:32 AM
Sell Boyue T62 Rooted	loviedovie	Flea Market	13	08-14-2015 03:32 PM
Does the Boyue T62+ have a fast refresh mode?	enthdegree	Android Devices	2	07-27-2015 05:13 PM
Ended Boyue T62 (rooted)	tastannin	Flea Market	7	11-25-2014 12:51 AM
I am looking for feedback on Boyue T61 T62 and Boyue C61R	treehugmug	Which one should I buy?	0	09-29-2014 07:53 PM

08-23-2015, 05:48 PM	#3
kozak776 Junior Member Posts: 8 Karma: 10 Join Date: Nov 2010 Device: pb360	thanks for your input and the tips .i try them later today im still at work cant do much at work.

08-24-2015, 12:49 AM	#4
kozak776 Junior Member Posts: 8 Karma: 10 Join Date: Nov 2010 Device: pb360	jnt thanks for your help your tips worked im back to stock on my boyou t62d.

08-24-2015, 11:47 AM	#5
Dr. Drib Grand Sorcerer Posts: 45,437 Karma: 59592133 Join Date: Jan 2007 Location: Peru Device: KINDLE: Oasis 3, Scribe (1st), Matcha; KOBO: Libra 2, Libra Colour	Other double posted thread deleted. Please do not double post. Mobileread considers that a form of spam. For YOUR CONVENIENCE, a link to our Posting Guidelines is located at the very bottom of every page. Don (Moderator)

08-24-2015, 09:34 PM	#7
kozak776 Junior Member Posts: 8 Karma: 10 Join Date: Nov 2010 Device: pb360	the tip about refresher button to hold it for 8 sec did the trick for me .I'm running the Energy eReader Pro + firmware 2.0.0B from last month on my reader. I rooted it and installed titanium back up and froze few services that were running in the background its great Energy eReader Pro + firmware 2.0.0B and the android services I froze giving me some good battery life.

Advert

Advert