![]() |
#1 |
Junior Member
![]() Posts: 5
Karma: 10
Join Date: Jul 2014
Device: none
|
Removing SD card from T68
I am having difficulty removing the SD card from my T68 - trying pushing it in, pushing it down, etc. etc., and it is not wanting to come out. I don't want to damage it. Could someone who has done this please tell me in which direction to apply pressure, so I don't damage the card or my T68? Thanks!!!
|
![]() |
![]() |
![]() |
#2 |
Connoisseur
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 54
Karma: 21028
Join Date: Apr 2015
Device: T68 Lynx, T68+
|
Push the card about 2 to 3mm into the T68 and it should then pop out, exposing about 2mm of the card for you to grab with your fingers.
If the card is really stuck (it shouldn't be), then you can take the back cover off to get better access to the card. Take a thin flat-head screwdriver. Start at the back/menu button and use the screwdriver to prise the seam open a bit. Then work the screwdriver about 10mm along the seam and repeat this until the back is separated completely. Slide the back cover downwards so that it slides sway from the SD card. Now you can see the SD card slot clearly, and you should be able to remove the SD card. A hint for reattaching the back cover. It's easy: just snap it back in place. But don't do it with an SD card in the card slot, as it is easy to break the SD card. I know! Cheers, Warren |
![]() |
![]() |
Advert | |
|
![]() |
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
onyx T68 ext sd card issues | freecr | Onyx Boox | 9 | 02-27-2018 09:58 AM |
T68/M96: MicroSD Card Format: FAT32, exFAT or ext4? | Irratzo | Onyx Boox | 12 | 02-26-2016 11:58 PM |
Question: T68 Lynx and Calibe Companion and/or external SD card | Solo1959 | Onyx Boox | 4 | 12-02-2014 12:31 AM |
Can T68 read sd card is exFat format? | FinancialWar | Onyx Boox | 3 | 07-22-2014 03:02 PM |
Need Help with SD Card and T68 | EricArcadia | Onyx Boox | 2 | 07-10-2014 10:25 AM |