Calibre Not Seeing My Nook HD+

[jefflongtin]

I searched for answers but really didn't have much luck. I don't have and SD card in the Nook so I was hoping to put it on the main memory. Calibre does not detect the Nook however. Has anyone had any luck getting a Nook HD+ detected with Calibre?

Below is the Debug Device Detection log.

Thanks.


calibre 0.9.17 isfrozen: True is64bit: False
Windows-XP-5.1.2600-SP3 Windows ('32bit', 'WindowsPE')
('Windows', 'XP', '5.1.2600')
Python 2.7.3
Windows: ('XP', '5.1.2600', 'SP3', 'Uniprocessor Free')
USB devices on system:
[u'usb\\root_hub&vid1106&pid3038&rev0081',
u'usb\\root_hub&vid1106&pid3038&rev0081',
u'usb\\root_hub&vid1106&pid3038&rev0081',
u'usb\\root_hub&vid1106&pid3038&rev0081',
u'usb\\root_hub20&vid1106&pid3104&rev0086',
u'usb\\vid_043d&pid_010b&rev_0001',
u'usb\\vid_043d&pid_010b&rev_0001&mi_00',
u'usb\\vid_043d&pid_010b&rev_0001&mi_01',
u'usb\\vid_043d&pid_010b&rev_0001&mi_02',
u'usb\\vid_046d&pid_08af&rev_0100',
u'usb\\vid_046d&pid_c517&rev_3810',
u'usb\\vid_046d&pid_c517&rev_3810&mi_00',
u'usb\\vid_046d&pid_c517&rev_3810&mi_01',
u'usb\\vid_04b4&pid_6560&rev_000;',
u'usb\\vid_04b4&pid_6830&rev_0420',
u'usb\\vid_058f&pid_6366&rev_0100',
u'usb\\vid_1a40&pid_0101&rev_0100',
u'usb\\vid_2080&pid_0005&rev_0216']
Unable to get free space for drive: A
(21, 'GetDiskFreeSpaceEx', 'The device is not ready.')
Drives detected:
(0) K:\ ~ USBSTOR\DISK&VEN_MULTIPLE&PROD_CARD__READER&REV_1. 00\058F63666433&0

No disabled plugins
Looking for devices of type: MTP_DEVICE
Cannot detect MTP devices
MTP devices are not supported on Windows XP

Looking for devices...

Devices possibly connected: None

[Apache]

I have Win 7 and it detects mine. Have you tried using a different USB Port? Also try upgrading to Calibre 0.9.18.
Apache

[gbm]

Originally Posted by jefflongtin

I searched for answers but really didn't have much luck. I don't have and SD card in the Nook so I was hoping to put it on the main memory. Calibre does not detect the Nook however. Has anyone had any luck getting a Nook HD+ detected with Calibre?

Below is the Debug Device Detection log.

Thanks.


calibre 0.9.17 isfrozen: True is64bit: False
Windows-XP-5.1.2600-SP3 Windows ('32bit', 'WindowsPE')
('Windows', 'XP', '5.1.2600')
Python 2.7.3
Windows: ('XP', '5.1.2600', 'SP3', 'Uniprocessor Free')

Spoiler:

USB devices on system:
[u'usb\\root_hub&vid1106&pid3038&rev0081',
u'usb\\root_hub&vid1106&pid3038&rev0081',
u'usb\\root_hub&vid1106&pid3038&rev0081',
u'usb\\root_hub&vid1106&pid3038&rev0081',
u'usb\\root_hub20&vid1106&pid3104&rev0086',
u'usb\\vid_043d&pid_010b&rev_0001',
u'usb\\vid_043d&pid_010b&rev_0001&mi_00',
u'usb\\vid_043d&pid_010b&rev_0001&mi_01',
u'usb\\vid_043d&pid_010b&rev_0001&mi_02',
u'usb\\vid_046d&pid_08af&rev_0100',
u'usb\\vid_046d&pid_c517&rev_3810',
u'usb\\vid_046d&pid_c517&rev_3810&mi_00',
u'usb\\vid_046d&pid_c517&rev_3810&mi_01',
u'usb\\vid_04b4&pid_6560&rev_000;',
u'usb\\vid_04b4&pid_6830&rev_0420',
u'usb\\vid_058f&pid_6366&rev_0100',
u'usb\\vid_1a40&pid_0101&rev_0100',
u'usb\\vid_2080&pid_0005&rev_0216']
Unable to get free space for drive: A
(21, 'GetDiskFreeSpaceEx', 'The device is not ready.')
Drives detected:
(0) K:\ ~ USBSTOR\DISK&VEN_MULTIPLE&PROD_CARD__READER&REV_1. 00\058F63666433&0

No disabled plugins
Looking for devices of type: MTP_DEVICE
Cannot detect MTP devices
MTP devices are not supported on Windows XP

Looking for devices...

Devices possibly connected: None

MTP devices are not supported on Windows XP This is your problem.

Your may want to look at calibre companion .

bernie

[jefflongtin]

Thank you for the replys. Of coarse the cc app isn't in the Nook app store so now I have to figure out how to sideload the Nook. B&N doesn't allow sideloading like you can a Kindle.

Thanks again!