PRS-T2 Covers for the PRS-T2

redneck eyeball · 08-26-2012, 05:27 PM

I'm wondering what covers are available for the T2, mine should arrive next week.

For my T1 I have this cover

And I would like to have something similar for the T2

The T1 cover was $10,50 from Ebay

Since there is already a topic on T1 covers I thought I'd open a new topic for T2 covers.

Shopaholic · 08-26-2012, 08:34 PM

They're pretty much the same. 1mm difference isn't going to necessitate a new cover.

DuskyRose · 08-26-2012, 09:02 PM

I have the lighted Sony cover for the T2 that is advertised for the T2.

I tested the T2 out on the lighted cover I have for my T1. Same cover, same size, both fit exactly the same to my eyes.

Inside the Sony covers there's a small indent in the material opposite the button bar on the T1. I guess to give room for the buttons. On the case for the T2 there are two strips. One in the place of the button bar for the T1 and another in place for the new buttons of the T2. T2 case has stitching along the front edges where the T1 doesn't.

The plastic parts containing the lights and the plastic back all look to be the same size.

So I think the changes to the official, lighted case are really just cosmetic and adjustment for the new buttons.

300com · 08-27-2012, 12:03 AM

I believe the box of the T2 cover says compatible with both T1 and T2.

redneck eyeball · 08-27-2012, 02:00 AM

Quote:

Originally Posted by Shopaholic

They're pretty much the same. 1mm difference isn't going to necessitate a new cover.

The buttons are in a different place. So they will not be visible if I would use my old cover.
It's not the thickness I'm worried about

soulfuldog · 08-27-2012, 10:11 AM

Hmmm the buttons are a problem depending on your cover aren't they.

There's T2 specific covers already showing on Amazon (like this and this), but since the size is so similar between the T1 and T2, you don't need to look for a 'new' one as such, just make sure it's one held in place at the corners rather than covering the buttons.

Perhaps look through the old T1 covers thread for suggestions.

Shark69 · 08-28-2012, 08:25 AM

SONY shops in NY sell red T1 cover with ligth as compatible with T2 for $20 instead $50.

08-26-2012, 05:27 PM	#1
redneck eyeball Member Posts: 12 Karma: 10 Join Date: Aug 2012 Device: PRS-T2	Covers for the PRS-T2 I'm wondering what covers are available for the T2, mine should arrive next week. For my T1 I have this cover And I would like to have something similar for the T2 The T1 cover was $10,50 from Ebay Since there is already a topic on T1 covers I thought I'd open a new topic for T2 covers.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PRS-650 PRS-650 - Covers Not Showing?	hpjrt	Sony Reader	7	08-19-2012 11:11 PM
PRS-T1 PRS-T1 and book covers	elemenoP	Sony Reader	9	05-25-2012 02:59 PM
M-Edge Executive Covers, Lights for PRS-600/PRS-505 on Clearance Sale at BestBuy.com	MasterGame	Sony Reader	4	10-16-2010 05:51 PM
PRS-505 Covers	VanillaEps	Sony Reader	12	03-27-2010 07:29 PM
PRS-505 covers incompatible with PRS-700?	fizzwinkus	Sony Reader	6	11-26-2008 03:47 PM

08-26-2012, 08:34 PM	#2
Shopaholic Cockatoo Mom! Posts: 1,509 Karma: 1841741 Join Date: Dec 2009 Location: Ontario, Canada Device: PW4, Kobo: A1, Clara, Libra 2, iPad Pro 11, iPad Mini	They're pretty much the same. 1mm difference isn't going to necessitate a new cover.

08-26-2012, 09:02 PM	#3
DuskyRose Guru Posts: 756 Karma: 9209502 Join Date: Apr 2007 Location: Virginia Device: Boox Note Air3, Palma, K-Scribe, Eclipsa 2e, & Libra 2, Ipads	I have the lighted Sony cover for the T2 that is advertised for the T2. I tested the T2 out on the lighted cover I have for my T1. Same cover, same size, both fit exactly the same to my eyes. Inside the Sony covers there's a small indent in the material opposite the button bar on the T1. I guess to give room for the buttons. On the case for the T2 there are two strips. One in the place of the button bar for the T1 and another in place for the new buttons of the T2. T2 case has stitching along the front edges where the T1 doesn't. The plastic parts containing the lights and the plastic back all look to be the same size. So I think the changes to the official, lighted case are really just cosmetic and adjustment for the new buttons.

08-27-2012, 12:03 AM	#4
300com Zealot Posts: 130 Karma: 1041448 Join Date: Sep 2009 Device: PRS-300	I believe the box of the T2 cover says compatible with both T1 and T2.

08-27-2012, 10:11 AM	#6
soulfuldog I ♥ Calibre Posts: 2,073 Karma: 5678911 Join Date: Aug 2011 Location: UK Device: Kindle Oasis, Voyage, Sony PRS-350, Hudl2	Hmmm the buttons are a problem depending on your cover aren't they. There's T2 specific covers already showing on Amazon (like this and this), but since the size is so similar between the T1 and T2, you don't need to look for a 'new' one as such, just make sure it's one held in place at the corners rather than covering the buttons. Perhaps look through the old T1 covers thread for suggestions.

08-28-2012, 08:25 AM	#7
Shark69 Zealot Posts: 136 Karma: 493152 Join Date: Mar 2012 Location: Spain Device: Kindle Oasis 2	SONY shops in NY sell red T1 cover with ligth as compatible with T2 for $20 instead $50.

Advert

Advert