PRS-650 Loose stylus

Canuck_in_Japan · 08-28-2011, 08:06 AM

I don't know if anyone has ever encountered this problem but despite only having used the stylus twice in the 8 months that I've owned the 650, the stylus has become lose and if I turn the unit upside down it will simply fall out. Can anyone think of a reason for this? I'm not sure what is holding the stylus in place in the first place. Friction? Magnetism? I tried placing it against a fridge magnet but the stylus wouldn't stick to it at all! Is there anyway I can fix this problem? Like I said I never use the stylus but I would prefer not losing it somewhere.

HarryT · 08-28-2011, 08:13 AM

It's just a friction fit. Are you sure that it's the right stylus? You couldn't have mixed it up with a smaller one?

Canuck_in_Japan · 08-28-2011, 09:09 AM

Nope-I only have one reader. That's really weird that it's come lose. I see that there's a small screw which is covered by the top of the stylus when it is in place. I wonder if I tried giving that a little tightening if it would have any effect.

Phogg · 08-28-2011, 12:18 PM

If that does not work, put a tiny bead of clear epoxy down in the hole and let it dry. It should dry flexible enough to mash down and secure your stylus yet not stress or break it when you pull it out.

Pinecone · 08-28-2011, 07:51 PM

Epoxy is not flexible.

Phogg · 08-28-2011, 10:34 PM

Quote:

Originally Posted by Pinecone

Epoxy is not flexible.

It is to the extent required by the task at hand. I was in QC for a major fishing rod manufacturer back in the '90s, and I also used to do custome conversions of resin models.

What is called for here is a bead the size of a sesame seed.

You could make a tiny strip of adhesive backed velvet work temporarily, but it would come off after a while.

chris77586 · 08-28-2011, 10:38 PM

maybe a few coats of spray urathane will do. plus your stylus will be super shiney!!! haha

Sweetpea · 08-29-2011, 02:22 AM

Quote:

Originally Posted by Canuck_in_Japan

I don't know if anyone has ever encountered this problem but despite only having used the stylus twice in the 8 months that I've owned the 650, the stylus has become lose and if I turn the unit upside down it will simply fall out. Can anyone think of a reason for this? I'm not sure what is holding the stylus in place in the first place. Friction? Magnetism? I tried placing it against a fridge magnet but the stylus wouldn't stick to it at all! Is there anyway I can fix this problem? Like I said I never use the stylus but I would prefer not losing it somewhere.

Mine does it too (which is why I ordered that new one from Chris... don't want to be without). I completely forgot to fit my mother's in there to see if it was my stylus or the hole... When we went on holiday, I simply left the stylus at home, too afraid I'd lose it somewhere...

Once I get that spare stylus, I'll let you know if one will stick...

Pinecone · 08-29-2011, 08:06 AM

Quote:

Originally Posted by Phogg

It is to the extent required by the task at hand. I was in QC for a major fishing rod manufacturer back in the '90s, and I also used to do custome conversions of resin models.

What is called for here is a bead the size of a sesame seed.

You could make a tiny strip of adhesive backed velvet work temporarily, but it would come off after a while.

Stick a drop of epoxy in your stylus hole and let us know how it works.

If you could make a bead stand up a bit on the side, and got just the right amount, it would work. But for the average person, they are either going to block the hole fully, or the epoxy will end up in the bottom and shorten the hole.

And the epoxy still doesn't flex, the stylus flexes past the bump, slightly bending it.

Phogg · 08-29-2011, 09:53 PM

Quote:

Originally Posted by Pinecone

Stick a drop of epoxy in your stylus hole and let us know how it works.

If you could make a bead stand up a bit on the side, and got just the right amount, it would work. But for the average person, they are either going to block the hole fully, or the epoxy will end up in the bottom and shorten the hole.

And the epoxy still doesn't flex, the stylus flexes past the bump, slightly bending it.

http://www.google.com/m/search?q=Fle...&ltoken=5c8d95

Mike45 · 08-30-2011, 11:33 PM

Hello Canuck,

Give this a try: Wrap a single layer of cellophane tape around your stylus below its plastic top. If the stylus is still loose, add another layer. Hope this works for you!

Just one more idea: Remove the stylus and you’ll see a small screw in the body of the reader. Undo it, and slightly raise the head of that screw --obviously, you’ll need a jeweller’s screwdriver to do that. The head of the screw should rub against the inside of the black plastic clip of the stylus, thus creating the “friction” to hold the stylus in place.

Pinecone · 08-31-2011, 11:35 AM

Quote:

Originally Posted by Phogg

http://www.google.com/m/search?q=Fle...&ltoken=5c8d95

And you think the average person is going to know about or find truely flexible epoxies?

Phogg · 08-31-2011, 12:02 PM

Quote:

Originally Posted by Pinecone

And you think the average person is going to know about or find truely flexible epoxies?

It depends on their profession and hobbies. Fishermen, women who do craftwork, and men who work with fiberglass or plastics.

GoodCompany · 09-01-2011, 04:40 AM

Quote:

Originally Posted by Canuck_in_Japan

Nope-I only have one reader. That's really weird that it's come lose. I see that there's a small screw which is covered by the top of the stylus when it is in place. I wonder if I tried giving that a little tightening if it would have any effect.

I had this problem for several days until I thought of tightening the top and that did the trick! Just gave it a few turns. Hope it works for you too!

08-28-2011, 08:06 AM	#1
Canuck_in_Japan Wizard Posts: 1,476 Karma: 14328611 Join Date: May 2009 Location: Tokyo, Japan Device: Aura, Aura H2O, Kindle PW3	Loose stylus I don't know if anyone has ever encountered this problem but despite only having used the stylus twice in the 8 months that I've owned the 650, the stylus has become lose and if I turn the unit upside down it will simply fall out. Can anyone think of a reason for this? I'm not sure what is holding the stylus in place in the first place. Friction? Magnetism? I tried placing it against a fridge magnet but the stylus wouldn't stick to it at all! Is there anyway I can fix this problem? Like I said I never use the stylus but I would prefer not losing it somewhere.

08-30-2011, 11:33 PM	#11
Mike45 Junior Member Posts: 3 Karma: 10 Join Date: Oct 2010 Device: Sony PRS 650	Hello Canuck, Give this a try: Wrap a single layer of cellophane tape around your stylus below its plastic top. If the stylus is still loose, add another layer. Hope this works for you! Just one more idea: Remove the stylus and you’ll see a small screw in the body of the reader. Undo it, and slightly raise the head of that screw --obviously, you’ll need a jeweller’s screwdriver to do that. The head of the screw should rub against the inside of the black plastic clip of the stylus, thus creating the “friction” to hold the stylus in place. Last edited by Mike45; 08-31-2011 at 12:48 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Robots on the loose!	abaldu8246	Self-Promotions by Authors and Publishers	0	07-05-2011 12:16 AM
PRS-700 HELP -- AC Adapter charger port loose	leday	Sony Reader	4	09-22-2010 05:13 PM
loose tea or not loose tea that is the question	ahammer	Lounge	55	10-23-2009 08:37 AM
PRS505 Loose plastic along bottom?	DougFNJ	Sony Reader	9	03-10-2008 10:57 AM
Loose change -> books!	Zoot	Amazon Kindle	4	01-05-2008 09:55 PM

08-28-2011, 08:13 AM	#2
HarryT eBook Enthusiast Posts: 85,544 Karma: 93383099 Join Date: Nov 2006 Location: UK Device: Kindle Oasis 2, iPad Pro 10.5", iPhone 6	It's just a friction fit. Are you sure that it's the right stylus? You couldn't have mixed it up with a smaller one?

08-28-2011, 09:09 AM	#3
Canuck_in_Japan Wizard Posts: 1,476 Karma: 14328611 Join Date: May 2009 Location: Tokyo, Japan Device: Aura, Aura H2O, Kindle PW3	Nope-I only have one reader. That's really weird that it's come lose. I see that there's a small screw which is covered by the top of the stylus when it is in place. I wonder if I tried giving that a little tightening if it would have any effect.

08-28-2011, 12:18 PM	#4
Phogg PHD in Horribleness Posts: 2,320 Karma: 23599604 Join Date: Dec 2008 Location: In the ironbound section, near avenue L Device: Just a whole bunch. I guess I am a collector now.	If that does not work, put a tiny bead of clear epoxy down in the hole and let it dry. It should dry flexible enough to mash down and secure your stylus yet not stress or break it when you pull it out.

08-28-2011, 07:51 PM	#5
Pinecone Guru Posts: 902 Karma: 1660722 Join Date: Nov 2009 Location: Maryland Device: PRS-650, PRS-600, PRS-350	Epoxy is not flexible.

08-28-2011, 10:38 PM	#7
chris77586 Patent Pending Posts: 43 Karma: 63873 Join Date: May 2011 Location: US Device: prs 350	maybe a few coats of spray urathane will do. plus your stylus will be super shiney!!! haha

Advert

Advert