PRS-505 PRS+ not seeing collections

BeccaAnn · 08-08-2011, 01:17 AM

I just installed PRS+ on my reader today. The only thing I did to once it was launched, was to add the correct time to the clock. I loaded my books using Calibre (version 0.7.12). I organize my books by series (collections). After being loaded, the correct number of collections was seen. I tried to open a book but got an invalid page notification. I shut off the reader. Upon starting again, it had to start over. It didn't see the files on my MS/SD cards. I ejected the cards and re-inserted them (one at a time). Now the reader doesn't see the correct number of collections. It sees only the ones on the internal memory. The number for author and title is correct. How do I fix this?

DoctorOhh · 08-08-2011, 02:34 AM

Quote:

Originally Posted by BeccaAnn

Upon starting again, it had to start over. It didn't see the files on my MS/SD cards. I ejected the cards and re-inserted them (one at a time). Now the reader doesn't see the correct number of collections. It sees only the ones on the internal memory. The number for author and title is correct. How do I fix this?

I don't use SD cards on my reader and don't have my 505 with me, but you've run into a major feature of PRS+. Go to PRS+ settings - browse folders - SD/MS card scan settings. I believe PRS+ might not be scanning your SD card. this is so folks can put 1000s of books on their cards and not have to wait for the 505 to scan them all into its database. Just find the setting and enable the SD card scan.

kartu · 08-08-2011, 02:44 AM

Hi BeccaAnn,

PRS+ works with collections just fine. (even though there is hardly a need to use them, since you already have folders)

Please check if collections work as you expect them to if reader is in 'safe mode" (you can enter safe mode (when prs+ doesn't start) by having it connected to USB during boot (startup)).

It wasn't worth creating a new thread, as there already is a support thread for PRS+ on this subforum.

BeccaAnn · 08-09-2011, 09:42 PM

Thanks for the quick replies. I've been to busy to reply back. The card scan was enabled (which is why I could see the correct numbers for author & title). I couldn't get safe mode to work. I decided to just delete everything off the card and reload. That seems to have done the trick. I don't know why it didn't work the first time.

kartu · 08-19-2011, 03:58 AM

Quote:

I don't know why it didn't work the first time.

Corrupted file system sometimes needs 2-3 restarts to get fixed.

08-08-2011, 01:17 AM	#1
BeccaAnn Groupie Posts: 188 Karma: 660 Join Date: Aug 2009 Location: Spearfish, SD, USA Device: Sony PRS-505	PRS+ not seeing collections I just installed PRS+ on my reader today. The only thing I did to once it was launched, was to add the correct time to the clock. I loaded my books using Calibre (version 0.7.12). I organize my books by series (collections). After being loaded, the correct number of collections was seen. I tried to open a book but got an invalid page notification. I shut off the reader. Upon starting again, it had to start over. It didn't see the files on my MS/SD cards. I ejected the cards and re-inserted them (one at a time). Now the reader doesn't see the correct number of collections. It sees only the ones on the internal memory. The number for author and title is correct. How do I fix this?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PRS-650 + Plugboards = too many collections	daffy4u	Calibre	2	12-20-2010 08:19 PM
Sony PRS-650 and collections	KenDavies	Calibre	8	10-15-2010 06:02 AM
Collections on PRS-505	mediax	Calibre	7	07-18-2010 05:34 PM
Cannot Edit Collections on PRS-300	grizedale	Calibre	3	06-12-2010 06:56 AM
collections prs 300	weasty	Sony Reader	5	09-11-2009 10:38 PM

08-08-2011, 02:44 AM	#3
kartu PRS+ author Posts: 1,637 Karma: 2446233 Join Date: Dec 2007 Device: Sony PRS-300, 505, 600, 650, 950	Hi BeccaAnn, PRS+ works with collections just fine. (even though there is hardly a need to use them, since you already have folders) Please check if collections work as you expect them to if reader is in 'safe mode" (you can enter safe mode (when prs+ doesn't start) by having it connected to USB during boot (startup)). It wasn't worth creating a new thread, as there already is a support thread for PRS+ on this subforum.

08-09-2011, 09:42 PM	#4
BeccaAnn Groupie Posts: 188 Karma: 660 Join Date: Aug 2009 Location: Spearfish, SD, USA Device: Sony PRS-505	Thanks for the quick replies. I've been to busy to reply back. The card scan was enabled (which is why I could see the correct numbers for author & title). I couldn't get safe mode to work. I decided to just delete everything off the card and reload. That seems to have done the trick. I don't know why it didn't work the first time.

Advert

Advert