m-edge leisure jacket - hard back?

June · 01-31-2009, 11:57 AM

I'm considering buying a more protective cover for my 505 and have been looking at and reading about the m-edge leisure jacket (http://www.buymedge.com/p_Sony505Ls.html) . The edges are soft foam they say, but what about the back?

Is the back of the leisure jacket hard/rigid? I.e. does it protect the reader screen from pressure, and twisting, when it is turned around facing the back?

I'm hoping to use that cover in a backpack or my purse if it is rigid enough.... otherwise I guess I'll have to go with the BookArmour, although I like the leisure jacket idea for reading by the kids' sand box, or while eating...

Thanks for any comments on how you use the LeisureJacket!

MickeyC · 01-31-2009, 12:42 PM

Hi June. I have a LeisureJacket and am very pleased with it. The back cover is padded and does protect the screen when you place it in the cover screen first. I use the LeisureJacket at the gym and when I'm on travel. I stick the reader in screen first and place it in my carry on. So far (12 months), I haven't had a problem. I also use it at the beach and on boats. Although it isn't waterproof, it is water resistant.

And I had a very good experience with MEdge. About six months after I bought the LeisureJacket, the zipper broke. So I sent MEdge an email asking what it would cost to have it repaired. And without asking and at no charge, they mailed me a new one. That is damn good customer support.

June · 01-31-2009, 01:43 PM

Thanks cassidym for the reply. When you say the "back cover is padded" does that mean that it's all made of some soft material (foam) and can be for example bent/squished? Or does the back cover had a hard middle layer (plastic in the middle, with padding around)? Is it of similar "bendiness" as the stock cover or more rigid?

Sorry about all the questions, but I have no chance to see one in person... It does sound very nice, but I'm stuck thinking I want a rigid flat surface covering the screen

MickeyC · 01-31-2009, 02:57 PM

It is bendable. If you want to PM me a mailing address, I can mail you my old one with the broken zipper (if I can find it) and you can check it out. I think I still have it somewhere

revfish · 01-31-2009, 11:04 PM

You aren't the only one that wants a cover with better screen protection that any that Sony have. I modify every cover I try for my Reader by adding a rigid insert into the front cover to protect the screen from the point-pressure that people report fracturing the glass substrate in the screen. I am currently using the At-A-Glace Planner cover with a cut down clipboard inserted inside the front cover as a screen protector.

June · 02-01-2009, 03:14 AM

cassidym - thank you for the kind offer, PM sent

revfish - an extra insert is what I've been thinking about, been looking at the top seam of the stock cover, thinking maybe i could rip it open and add an insert... a cut down clipboard sounds like a good source for an insert. Hmm.... Maybe I could add some type of thin sticky-backed felt to an insert and keep that at the bottom of the leisure jacket to add rigidity.

revfish · 02-01-2009, 09:27 AM

The stock cover will not work for an insert. I wound up cutting up my tan one in an attempt at such a thing but it is glued together too well. The felt idea might work. I would be afraid of it peeling back over time and getting adhesive all over the Reader.

I have used the insert more for planner cover style cases.

June · 02-02-2009, 03:40 AM

Thanks for that info revfish, kept me from cutting up my tan stock cover

I have some felt of the type that is used on pool tables, I'll try to stick that to some plastic to see if it stays put.

MickeyC · 02-02-2009, 01:18 PM

June, just mailed the (broken) Leisure Jacket to you and sent you a PM.

June · 02-26-2009, 10:54 AM

Sweet - the Leisure Jacket has arrived. The back is a bit too flexible/soft for my liking. BUT I just discovered that it can be tweaked...

The 'frame' that the 505 sits in is attached to a square of cardboard and glued into the cover. I ripped the 'frame' out of the zippered cover, and with adding a piece of board/plastic in between the 'frame' and the cover, stacking and gluing them back together, I think I will have a nice and rigid back that will protect the screen perfectly. The glue is drying as I write this, so I'll test it tomorrow. And post pictures once I get them transferred to my computer.

Thank you cassidym for letting me have your broken cover, I wouldn't have had the guts to buy one unseen and then tear it up.

miao · 11-08-2009, 01:49 PM

June, thanks for sharing your idea on tweaking the Leisure Jacket.
I have just tweaked mine by inserting a sheet of plastic (cut out of a dvd box) between the bottom and the back cover.
BTW the Leisure Jacket works very well with my new PRS-600, too.

01-31-2009, 11:57 AM	#1
June Addict Posts: 306 Karma: 4508151 Join Date: Aug 2008 Location: Scandinavia Device: Kobo Libra, Oasis 1&2 and others	m-edge leisure jacket - hard back? I'm considering buying a more protective cover for my 505 and have been looking at and reading about the m-edge leisure jacket (http://www.buymedge.com/p_Sony505Ls.html) . The edges are soft foam they say, but what about the back? Is the back of the leisure jacket hard/rigid? I.e. does it protect the reader screen from pressure, and twisting, when it is turned around facing the back? I'm hoping to use that cover in a backpack or my purse if it is rigid enough.... otherwise I guess I'll have to go with the BookArmour, although I like the leisure jacket idea for reading by the kids' sand box, or while eating... Thanks for any comments on how you use the LeisureJacket!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ended Kindle DX with M-Edge Leisure Case and Octo Slip Cover	luqmaninbmore	Flea Market	21	06-15-2010 01:14 PM
Which M-edge jacket?	EliNoah	Sony Reader	4	12-04-2009 06:49 PM
Accessories M-edge Platform jacket??	fishcube	Amazon Kindle	4	10-28-2009 09:16 PM
M-edge Silicon Jacket	iAmBeer	iRex	4	02-10-2008 12:37 AM
M-Edge jacket colors available	Aprilbeginnings	Sony Reader	47	06-22-2007 10:15 AM

01-31-2009, 12:42 PM	#2
MickeyC Grand Sorcerer Posts: 16,731 Karma: 12185114 Join Date: Nov 2007 Location: Florida Device: iPhone 6 plus, Sony T1, iPad 3	Hi June. I have a LeisureJacket and am very pleased with it. The back cover is padded and does protect the screen when you place it in the cover screen first. I use the LeisureJacket at the gym and when I'm on travel. I stick the reader in screen first and place it in my carry on. So far (12 months), I haven't had a problem. I also use it at the beach and on boats. Although it isn't waterproof, it is water resistant. And I had a very good experience with MEdge. About six months after I bought the LeisureJacket, the zipper broke. So I sent MEdge an email asking what it would cost to have it repaired. And without asking and at no charge, they mailed me a new one. That is damn good customer support.

01-31-2009, 01:43 PM	#3
June Addict Posts: 306 Karma: 4508151 Join Date: Aug 2008 Location: Scandinavia Device: Kobo Libra, Oasis 1&2 and others	Thanks cassidym for the reply. When you say the "back cover is padded" does that mean that it's all made of some soft material (foam) and can be for example bent/squished? Or does the back cover had a hard middle layer (plastic in the middle, with padding around)? Is it of similar "bendiness" as the stock cover or more rigid? Sorry about all the questions, but I have no chance to see one in person... It does sound very nice, but I'm stuck thinking I want a rigid flat surface covering the screen

01-31-2009, 02:57 PM	#4
MickeyC Grand Sorcerer Posts: 16,731 Karma: 12185114 Join Date: Nov 2007 Location: Florida Device: iPhone 6 plus, Sony T1, iPad 3	It is bendable. If you want to PM me a mailing address, I can mail you my old one with the broken zipper (if I can find it) and you can check it out. I think I still have it somewhere

01-31-2009, 11:04 PM	#5
revfish The Pastor of Disaster Posts: 202 Karma: 994 Join Date: Apr 2008 Device: Sony PRS-650, Apple iPad 3 64GB Wifi	You aren't the only one that wants a cover with better screen protection that any that Sony have. I modify every cover I try for my Reader by adding a rigid insert into the front cover to protect the screen from the point-pressure that people report fracturing the glass substrate in the screen. I am currently using the At-A-Glace Planner cover with a cut down clipboard inserted inside the front cover as a screen protector.

02-01-2009, 03:14 AM	#6
June Addict Posts: 306 Karma: 4508151 Join Date: Aug 2008 Location: Scandinavia Device: Kobo Libra, Oasis 1&2 and others	cassidym - thank you for the kind offer, PM sent revfish - an extra insert is what I've been thinking about, been looking at the top seam of the stock cover, thinking maybe i could rip it open and add an insert... a cut down clipboard sounds like a good source for an insert. Hmm.... Maybe I could add some type of thin sticky-backed felt to an insert and keep that at the bottom of the leisure jacket to add rigidity.

02-01-2009, 09:27 AM	#7
revfish The Pastor of Disaster Posts: 202 Karma: 994 Join Date: Apr 2008 Device: Sony PRS-650, Apple iPad 3 64GB Wifi	The stock cover will not work for an insert. I wound up cutting up my tan one in an attempt at such a thing but it is glued together too well. The felt idea might work. I would be afraid of it peeling back over time and getting adhesive all over the Reader. I have used the insert more for planner cover style cases.

02-02-2009, 03:40 AM	#8
June Addict Posts: 306 Karma: 4508151 Join Date: Aug 2008 Location: Scandinavia Device: Kobo Libra, Oasis 1&2 and others	Thanks for that info revfish, kept me from cutting up my tan stock cover I have some felt of the type that is used on pool tables, I'll try to stick that to some plastic to see if it stays put.

02-02-2009, 01:18 PM	#9
MickeyC Grand Sorcerer Posts: 16,731 Karma: 12185114 Join Date: Nov 2007 Location: Florida Device: iPhone 6 plus, Sony T1, iPad 3	June, just mailed the (broken) Leisure Jacket to you and sent you a PM.

02-26-2009, 10:54 AM	#10
June Addict Posts: 306 Karma: 4508151 Join Date: Aug 2008 Location: Scandinavia Device: Kobo Libra, Oasis 1&2 and others	Sweet - the Leisure Jacket has arrived. The back is a bit too flexible/soft for my liking. BUT I just discovered that it can be tweaked... The 'frame' that the 505 sits in is attached to a square of cardboard and glued into the cover. I ripped the 'frame' out of the zippered cover, and with adding a piece of board/plastic in between the 'frame' and the cover, stacking and gluing them back together, I think I will have a nice and rigid back that will protect the screen perfectly. The glue is drying as I write this, so I'll test it tomorrow. And post pictures once I get them transferred to my computer. Thank you cassidym for letting me have your broken cover, I wouldn't have had the guts to buy one unseen and then tear it up.

11-08-2009, 01:49 PM	#11
miao Junior Member Posts: 8 Karma: 130 Join Date: Oct 2009 Location: Warsaw Device: PRS-600	June, thanks for sharing your idea on tweaking the Leisure Jacket. I have just tweaked mine by inserting a sheet of plastic (cut out of a dvd box) between the bottom and the back cover. BTW the Leisure Jacket works very well with my new PRS-600, too.

Advert

Advert