Pocket Edge finally arrived!

syclone · 07-08-2011, 05:11 PM

The Pocket Edge I ordered from Woot finally arrive this afternoon. I started to charge it and registered it. It took about 10 minutes before it told me that there was an update. It downloaded something but never did anything with it. This was repeated about 4 times with no success. So, I went to the Ermine 2.2 download - renamed it and put it on a FAT formatted thumb drive. This update worked perfectly.

I'm very pleasantly surprised at the speed of the device. It's not quite as fast as either of my iPads, but still very satisfactory.

One of the first things I did was see if it would sync up with Calibre ver.8.8 - no Problem! The speed that 2 books in ePub format uploaded to the Edge was amazing. The E-ink screen is very readable, but a little dim in low light. Is there any way to bring up the brightness?

I'm going to wait until it's fully charged before I play further - but again - a very nice piece of gear.

I noticed that there is a further upgrade to Ermine - has this newer version been vetted in any way?

muranternet · 07-08-2011, 05:38 PM

syclone, that's a test build by a forum member to try to get market working. Get it if you want to test for stability, otherwise I'd stay on ermine 0.9. Also, get a hold of the golden update (Dingo) for PE in case something bad happens and you need to recover.

Filark · 07-08-2011, 11:08 PM

Glad you got it and got it going, Syclone!

There is no way to brighten the e-ink, but you can get a USB light to use with your PE. Or any kind of light beside it.

In case you don't already know: You can read books that are not in your library (I think Calibre puts them in your downloads file), but if you want to attach notes or websites to your books or navigate using the table of contents you will have to add the books to your library. This is easy to do after the book is opened by the Reader. Just tap the icon at the top of the page that looks like books with a plus in front and you're done!

Have fun!

ivanjt · 07-09-2011, 06:27 AM

Another thing you might find interesting for reading epub and other books on the LCD side is CoolReader3 http://sourceforge.net/projects/cren...s/CoolReader3/

07-08-2011, 05:11 PM	#1
syclone Zealot Posts: 109 Karma: 536 Join Date: Jun 2011 Location: NY Device: Entourage Pocket Edge iPhone 4S IPad 1 iPad 2 Nook Touch 4 Palm Pilot	Pocket Edge finally arrived! The Pocket Edge I ordered from Woot finally arrive this afternoon. I started to charge it and registered it. It took about 10 minutes before it told me that there was an update. It downloaded something but never did anything with it. This was repeated about 4 times with no success. So, I went to the Ermine 2.2 download - renamed it and put it on a FAT formatted thumb drive. This update worked perfectly. I'm very pleasantly surprised at the speed of the device. It's not quite as fast as either of my iPads, but still very satisfactory. One of the first things I did was see if it would sync up with Calibre ver.8.8 - no Problem! The speed that 2 books in ePub format uploaded to the Edge was amazing. The E-ink screen is very readable, but a little dim in low light. Is there any way to bring up the brightness? I'm going to wait until it's fully charged before I play further - but again - a very nice piece of gear. I noticed that there is a further upgrade to Ermine - has this newer version been vetted in any way?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Accessories M-Edge K3 Covers have finally arrived... Almost	jimplasticguy	Amazon Kindle	15	09-03-2010 07:01 PM
Under The Dome FINALLY arrived!	kindlekitten	Amazon Kindle	23	01-01-2010 03:11 PM
Finally it is arrived after 17 days	77endymion77	Astak EZReader	1	11-06-2009 03:11 AM
Finally arrived no:2	gragra	Sony Reader	4	09-16-2009 04:29 AM
YES!!! It finally arrived	Nate0072	Sony Reader	6	04-04-2009 07:13 PM

07-08-2011, 05:38 PM	#2
muranternet Connoisseur Posts: 75 Karma: 10 Join Date: May 2011 Device: Kindle 3/Sony PRS-300/Nook Color running CM7/P eDGe	syclone, that's a test build by a forum member to try to get market working. Get it if you want to test for stability, otherwise I'd stay on ermine 0.9. Also, get a hold of the golden update (Dingo) for PE in case something bad happens and you need to recover.

07-08-2011, 11:08 PM	#3
Filark Armed with a smile :) Posts: 1,421 Karma: 2463560 Join Date: Sep 2009 Location: California, USA Device: enTourage eDGe & Pocket eDGe, Samsung Galaxy Note II	Glad you got it and got it going, Syclone! There is no way to brighten the e-ink, but you can get a USB light to use with your PE. Or any kind of light beside it. In case you don't already know: You can read books that are not in your library (I think Calibre puts them in your downloads file), but if you want to attach notes or websites to your books or navigate using the table of contents you will have to add the books to your library. This is easy to do after the book is opened by the Reader. Just tap the icon at the top of the page that looks like books with a plus in front and you're done! Have fun!

07-09-2011, 06:27 AM	#4
ivanjt Guru Posts: 858 Karma: 1027478 Join Date: Aug 2010 Location: South of France Device: kindle dx; eDGe	Another thing you might find interesting for reading epub and other books on the LCD side is CoolReader3 http://sourceforge.net/projects/cren...s/CoolReader3/

Advert