Revive A Sick SmartQ

Nation.A.List · 10-25-2009, 01:50 PM

I finally managed to get my sick Q7 (would not turn off, would not boot or re-flash) up and running after many unsuccessful attempts, so I thought I would post my method here in the hope it will help someone else.

Firstly prepare an SD card
Format the SD card with the Panasonic SD Card Formatting Tool. http://panasonic.jp/support/global/c...formatter.html
Doing this is highly recommended as I wasted several days using a card that had previously worked OK with my Q7 and still worked fine in my PC, but subsequently turned out to have 4 strange partitions on it when viewed on my now working Q7.

Now use the SDUpdate/Card Fuser Tool on the newly formatted SD card. http://www.jiongtang.com/fourm/viewtopic.php?f=17&t=746 Copy a SmartQ7 firmware file onto it and press the (●) key (top right) while powering on OR reseting the Q7. There is a longer delay than usual before the flashing started but once it did everything went well from there on.

ColdSun · 10-25-2009, 02:11 PM

Great work, Nation! I'm happy to hear you have revived it. My SmartQ7 has a problem with the touch screen. It is completely intermittant and sometimes I can use it for a long time before it happens, but eventually the touch screen just stops working. It doesn't matter what OS I'm using. Anyhow, it works well enough for me to use it in reviews for comparisons, so that is what I'm using it for.

10-25-2009, 01:50 PM	#1
Nation.A.List Addict Posts: 270 Karma: 112 Join Date: Jun 2009 Location: England Device: SmartQ 7	Revive A Sick SmartQ I finally managed to get my sick Q7 (would not turn off, would not boot or re-flash) up and running after many unsuccessful attempts, so I thought I would post my method here in the hope it will help someone else. Firstly prepare an SD card Format the SD card with the Panasonic SD Card Formatting Tool. http://panasonic.jp/support/global/c...formatter.html Doing this is highly recommended as I wasted several days using a card that had previously worked OK with my Q7 and still worked fine in my PC, but subsequently turned out to have 4 strange partitions on it when viewed on my now working Q7. Now use the SDUpdate/Card Fuser Tool on the newly formatted SD card. http://www.jiongtang.com/fourm/viewtopic.php?f=17&t=746 Copy a SmartQ7 firmware file onto it and press the (●) key (top right) while powering on OR reseting the Q7. There is a longer delay than usual before the flashing started but once it did everything went well from there on.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Questions for A81/W1060, SmartQ 7, and SmartQ V7 owners	bryanzs	Alternative Devices	36	05-27-2010 11:46 AM
Could ebook readers revive the short story format?	stoogeswoman	Reading Recommendations	29	03-10-2009 11:44 AM
If you are sick	GeoffC	Lounge	2	08-10-2008 01:50 PM
iLiad Good news: kill your iLiad and revive it yourself - soon!	doctorow	iRex Developer's Corner	0	08-08-2006 04:28 AM
200 ways to revive a hard drive	Colin Dunstan	Lounge	0	10-25-2004 08:32 PM

10-25-2009, 02:11 PM	#2
ColdSun Developer/Device Reviews Posts: 591 Karma: 22183 Join Date: Jun 2007 Location: Phoenix, AZ Device: Sony Xperia Tablet Z, Kindle Paperwhite 2, Lenovo Yoga 8, IPad 3	Great work, Nation! I'm happy to hear you have revived it. My SmartQ7 has a problem with the touch screen. It is completely intermittant and sometimes I can use it for a long time before it happens, but eventually the touch screen just stops working. It doesn't matter what OS I'm using. Anyhow, it works well enough for me to use it in reviews for comparisons, so that is what I'm using it for.

Advert