Problem upgrading calibre on windows XP

bazmi · 01-05-2009, 10:20 AM

i had installed calibre on a windows xp machine (thinkpad X61p). worked ok.´that was .4.120
when i tried to upgrade t0 .4.124, i closed the windo and right clicked on claibre icon in my tray and selected quit. the calibre icon still remains in the tray but doesnt respond to any mouse click (no menu pops up). the only way to get rid of the icon is either by killing the process 'calibre' or rebooting. and while this process is still running, upgrades dont work well either.

the problem is the same now for .4.125

is someone else also seeing this problem? is there a solution?

/bazmi.

itimpi · 01-05-2009, 11:05 AM

You are right in that if the Calibre process is still running you will not be able to upgrade.

I tend to switch the tray icon off in the configuration screens. I also tend to quit Calibre from the main window using CTRL-Q which terminates the Calibre process even if you have the Tray icon active..

kovidgoyal · 01-05-2009, 11:09 AM

What happens if you press Ctrl+Q in the main calibre window?

bazmi · 01-05-2009, 04:36 PM

inconsistent behaviour. tried three times.

first time i pressed ctrlQ with the calibre window in focus, the icon in the tray went away with a delay of about 1-2 sec.

tried it again, this time the icon stayed in the tray.

with the icon in the tray. launched calibre. window came up and the num of calibre icons in the tray became 2.

killed both the calibre processes. the icons vanished.

started calibre again and tried ctrlQ again. icon still stayed in the tray.

as i said earlier - it isnt a major problem but a little bit annoying because you have to manually kill the process.

anything else i can try out?

/bazmi.

kovidgoyal · 01-05-2009, 04:47 PM

I've changed the shutdown code to make it hopefully a little more robust (though it always quits correctly for me), so try the next release.

bazmi · 01-05-2009, 04:50 PM

thanks very much.

01-05-2009, 10:20 AM	#1
bazmi Enthusiast Posts: 40 Karma: 10 Join Date: Dec 2008 Location: zurich, switzerland Device: irex dr 1000s, sony prs 700, 505, iliad BE. N800, SL6000, SL3200...	Problem upgrading calibre on windows XP i had installed calibre on a windows xp machine (thinkpad X61p). worked ok.´that was .4.120 when i tried to upgrade t0 .4.124, i closed the windo and right clicked on claibre icon in my tray and selected quit. the calibre icon still remains in the tray but doesnt respond to any mouse click (no menu pops up). the only way to get rid of the icon is either by killing the process 'calibre' or rebooting. and while this process is still running, upgrades dont work well either. the problem is the same now for .4.125 is someone else also seeing this problem? is there a solution? /bazmi.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Windows 7 New Calibre Version problem	Pandzilla	Calibre	8	10-03-2010 02:15 PM
problem upgrading	GA Russell	Calibre	4	09-29-2010 05:22 PM
Windows 7 64-bit Upgrading from 0.6.16 to 0.6.37 problems	ciscoswitch	Calibre	33	04-06-2010 01:35 PM
Problem upgrading calibre	AprilHare	Calibre	5	04-16-2009 05:42 PM
Problem upgrading	capinredbeard	iRex	4	02-12-2008 02:02 AM

01-05-2009, 11:05 AM	#2
itimpi Wizard Posts: 4,553 Karma: 950151 Join Date: Nov 2008 Device: Sony PRS-950, iphone/ipad (Marvin/iBooks/QuickReader)	You are right in that if the Calibre process is still running you will not be able to upgrade. I tend to switch the tray icon off in the configuration screens. I also tend to quit Calibre from the main window using CTRL-Q which terminates the Calibre process even if you have the Tray icon active..

01-05-2009, 11:09 AM	#3
kovidgoyal creator of calibre Posts: 45,227 Karma: 27110894 Join Date: Oct 2006 Location: Mumbai, India Device: Various	What happens if you press Ctrl+Q in the main calibre window?

01-05-2009, 04:36 PM	#4
bazmi Enthusiast Posts: 40 Karma: 10 Join Date: Dec 2008 Location: zurich, switzerland Device: irex dr 1000s, sony prs 700, 505, iliad BE. N800, SL6000, SL3200...	inconsistent behaviour. tried three times. first time i pressed ctrlQ with the calibre window in focus, the icon in the tray went away with a delay of about 1-2 sec. tried it again, this time the icon stayed in the tray. with the icon in the tray. launched calibre. window came up and the num of calibre icons in the tray became 2. killed both the calibre processes. the icons vanished. started calibre again and tried ctrlQ again. icon still stayed in the tray. as i said earlier - it isnt a major problem but a little bit annoying because you have to manually kill the process. anything else i can try out? /bazmi.

01-05-2009, 04:47 PM	#5
kovidgoyal creator of calibre Posts: 45,227 Karma: 27110894 Join Date: Oct 2006 Location: Mumbai, India Device: Various	I've changed the shutdown code to make it hopefully a little more robust (though it always quits correctly for me), so try the next release.

01-05-2009, 04:50 PM	#6
bazmi Enthusiast Posts: 40 Karma: 10 Join Date: Dec 2008 Location: zurich, switzerland Device: irex dr 1000s, sony prs 700, 505, iliad BE. N800, SL6000, SL3200...	thanks very much.

Advert

Advert