Question about gestures (hold corner)

LucyOne · 07-14-2019, 02:45 PM

I've started using KOReader on my Pocketbook Touch HD 3 and I'm trying to find the optimal gesture settings for me. I would like to use the settings for "hold corner" but then this interferes with dictionary lookup, i.e. if I long tap on a word in a corner to look it up in the dictionary, the configured action takes place instead. Is there a trick to use both functions, for example the duration of the tap?

gerhaher · 07-15-2019, 03:11 AM

If I remember correctly, I've changed DTAP_ZONE_BOTTOM_LEFT and DTAP_ZONE_BOTTOM_RIGHT on my KA1.

My zone definitions (which I think differ from default values):

Left:
h = 0.04
w = 0.125
x = 0
y = 0.96

Right:
h = 0.04
w = 0.125
x = 0.875
y = 0.96

LucyOne · 07-15-2019, 06:16 AM

What does that mean exactly? Are the tap zones outside the text now?

gerhaher · 07-15-2019, 06:33 AM

Quote:

Originally Posted by LucyOne

What does that mean exactly? Are the tap zones outside the text now?

Yes.
I changed them because I had the same problem as you described.

LucyOne · 07-15-2019, 06:41 AM

The tap zones might be too small for my 6"-device. I also like to read with fairly small margins, so I don't think this will work for me. But thanks for the idea.

LucyOne · 07-26-2019, 05:19 AM

Quote:

Originally Posted by gerhaher

If I remember correctly, I've changed DTAP_ZONE_BOTTOM_LEFT and DTAP_ZONE_BOTTOM_RIGHT on my KA1.

My zone definitions (which I think differ from default values):

Left:
h = 0.04
w = 0.125
x = 0
y = 0.96

Right:
h = 0.04
w = 0.125
x = 0.875
y = 0.96

Do you have any idea about the values for a 6-inch screen if the touch zones in the corners should be 0,4 cm wide and 0,5 cm long?

gerhaher · 07-28-2019, 02:28 PM

Quote:

Originally Posted by LucyOne

Do you have any idea about the values for a 6-inch screen if the touch zones in the corners should be 0,4 cm wide and 0,5 cm long?

Not really. But I tried my above values on my 6-inch Kobo Aura. I think they work OK for me.

Frenzie · 07-29-2019, 03:47 AM

It goes from 0-1, so it should be easy to calculate based on something a little more tangible than 6" screen.

The PocketBook Touch HD 3 says it has a resolution of 1072 × 1448. With a diagonal of 6 inch (15.24 cm) that means 9.07 cm × 12.25 cm.

0.4/9.07 = 0.044
0.5/12.25 = 0.041

Practically speaking less than half a cm seems a bit small though. Might be hard to use.

07-14-2019, 02:45 PM	#1
LucyOne Librocubicularist Posts: 617 Karma: 11908623 Join Date: Dec 2013 Location: Germany Device: PocketBook InkPad 3 & Touch HD 3, Kobo Clara HD, Kindle Paperwhite 5	Question about gestures (hold corner) I've started using KOReader on my Pocketbook Touch HD 3 and I'm trying to find the optimal gesture settings for me. I would like to use the settings for "hold corner" but then this interferes with dictionary lookup, i.e. if I long tap on a word in a corner to look it up in the dictionary, the configured action takes place instead. Is there a trick to use both functions, for example the duration of the tap?

07-15-2019, 03:11 AM	#2
gerhaher Enthusiast Posts: 49 Karma: 112850 Join Date: Oct 2014 Device: Kobo Libra 2, Kobo Sage	If I remember correctly, I've changed DTAP_ZONE_BOTTOM_LEFT and DTAP_ZONE_BOTTOM_RIGHT on my KA1. My zone definitions (which I think differ from default values): Left: h = 0.04 w = 0.125 x = 0 y = 0.96 Right: h = 0.04 w = 0.125 x = 0.875 y = 0.96 Last edited by gerhaher; 07-15-2019 at 05:12 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Audible on hold, freebie account question	kitkat99	Audiobook Discussions	2	03-23-2017 01:05 PM
Question on how to edit text margins (avoiding corner)	adannada	Editor	8	08-08-2016 09:10 PM
Using gestures for screenshots	Doitsu	Kindle Developer's Corner	3	12-19-2014 10:02 AM
Paperwhite Gestures	Akirainblack	Kindle Developer's Corner	4	11-02-2012 07:57 AM
Unutterably Silly Hold your breath and hold down 'x'. (Dumb game.)	frabjous	Lounge	82	11-29-2009 04:17 AM

07-15-2019, 06:16 AM	#3
LucyOne Librocubicularist Posts: 617 Karma: 11908623 Join Date: Dec 2013 Location: Germany Device: PocketBook InkPad 3 & Touch HD 3, Kobo Clara HD, Kindle Paperwhite 5	What does that mean exactly? Are the tap zones outside the text now?

07-15-2019, 06:41 AM	#5
LucyOne Librocubicularist Posts: 617 Karma: 11908623 Join Date: Dec 2013 Location: Germany Device: PocketBook InkPad 3 & Touch HD 3, Kobo Clara HD, Kindle Paperwhite 5	The tap zones might be too small for my 6"-device. I also like to read with fairly small margins, so I don't think this will work for me. But thanks for the idea.

07-29-2019, 03:47 AM	#8
Frenzie Wizard Posts: 1,742 Karma: 730681 Join Date: Oct 2014 Location: Antwerp Device: Kobo Aura H2O	It goes from 0-1, so it should be easy to calculate based on something a little more tangible than 6" screen. The PocketBook Touch HD 3 says it has a resolution of 1072 × 1448. With a diagonal of 6 inch (15.24 cm) that means 9.07 cm × 12.25 cm. 0.4/9.07 = 0.044 0.5/12.25 = 0.041 Practically speaking less than half a cm seems a bit small though. Might be hard to use.

Advert

Advert