PW2 Trouble not solved after tried 2 different methods

[Victoria_sxy]

Hi guys,

I have read some of threads for unbricking kindle pw2 as mine has been stuck on the screen for the tree for almost a month.

I tried 2 methods: one is through SecureCRT, another one is through the following tutorials:
https://www.mobileread.com/forums/sh...d.php?t=267541

Unfortunately, I can't solve the problem and since I totally know very little of programming, I just copy and paste what the tutorials say.

The same situation happened in those two cases:

Here is what I found from Putty-COM3 windows:

@Press [ENTER] for recovery menu...       0 /BOOTING DEFAULT.
IP-Config: no devices to configure
[   10.824902] mmc0: Timeout, intmask=0x00100000
[   10.836896] mmcblk0: error -110 transferring data, sector 471188, nr 2, cmd r         esponse 0x900, card status 0x80b00
[   16.270065] mmc0: Timeout, intmask=0x00100000
[   16.277004] mmcblk0: error -110 transferring data, sector 471188, nr 2, cmd r         esponse 0x900, card status 0x0
[   16.286815] end_request: I/O error, dev mmcblk0, sector 471188
[   21.715653] mmc0: Timeout, intmask=0x00100000
[   21.722579] mmcblk0: r/w command failed, status = 0x80900
[   21.728062] end_request: I/O error, dev mmcblk0, sector 471189
[   21.733953] JBD: IO error reading journal superblock
[   21.738996] EXT3-fs (mmcblk0p1): error loading journal
[   59.917387] mmc0: Timeout, intmask=0x00100000
[   59.926865] mmcblk0: error -110 transferring data, sector 469482, nr 2, cmd r         esponse 0x900, card status 0x80b00
[   65.360071] mmc0: Timeout, intmask=0x00100000
[   65.367014] mmcblk0: error -110 transferring data, sector 469482, nr 2, cmd response 0x900, card status 0x0
[   65.376886] end_request: I/O error, dev mmcblk0, sector 469482
[   70.805732] mmc0: Timeout, intmask=0x00100000
[   70.812661] mmcblk0: r/w command failed, status = 0x80900
[   70.818121] end_request: I/O error, dev mmcblk0, sector 469483
[   70.823978] Buffer I/O error on device mmcblk0p1, logical block 201973
[   76.254555] mmc0: Timeout, intmask=0x00100000
[   76.264030] mmcblk0: error -110 transferring data, sector 470478, nr 2, cmd response 0x900, card status 0x80b00
[   81.697194] mmc0: Timeout, intmask=0x00100000
[   81.704125] mmcblk0: error -110 transferring data, sector 470478, nr 2, cmd response 0x900, card status 0x0
[   81.714003] end_request: I/O error, dev mmcblk0, sector 470478
[   87.142877] mmc0: Timeout, intmask=0x00100000
[   87.149805] mmcblk0: r/w command failed, status = 0x80900
[   87.155305] end_request: I/O error, dev mmcblk0, sector 470479
[   87.161162] Buffer I/O error on device mmcblk0p1, logical block 202471
[   92.591731] mmc0: Timeout, intmask=0x00100000
[   92.601211] mmcblk0: error -110 transferring data, sector 470478, nr 2, cmd response 0x900, card status 0x80b00
[   98.034393] mmc0: Timeout, intmask=0x00100000
[   98.041330] mmcblk0: error -110 transferring data, sector 470478, nr 2, cmd response 0x900, card status 0x0
[   98.051170] end_request: I/O error, dev mmcblk0, sector 470478
[  103.480045] mmc0: Timeout, intmask=0x00100000
[  103.486979] mmcblk0: r/w command failed, status = 0x80900
[  103.492400] end_request: I/O error, dev mmcblk0, sector 470479
[  103.498254] Buffer I/O error on device mmcblk0p1, logical block 202471
[  108.928768] mmc0: Timeout, intmask=0x00100000
[  108.938255] mmcblk0: error -110 transferring data, sector 469482, nr 2, cmd response 0x900, card status 0x80b00
[  114.371415] mmc0: Timeout, intmask=0x00100000
[  114.378354] mmcblk0: error -110 transferring data, sector 469482, nr 2, cmd response 0x900, card status 0x0
[  114.388154] end_request: I/O error, dev mmcblk0, sector 469482
[  119.816995] mmc0: Timeout, intmask=0x00100000
[  119.823923] mmcblk0: r/w command failed, status = 0x80900
[  119.829440] end_request: I/O error, dev mmcblk0, sector 469483
[  119.835296] Buffer I/O error on device mmcblk0p1, logical block 201973
[  125.265943] mmc0: Timeout, intmask=0x00100000
[  125.275430] mmcblk0: error -110 transferring data, sector 554206, nr 2, cmd response 0x900, card status 0x80b00
[  130.708621] mmc0: Timeout, intmask=0x00100000
[  130.715563] mmcblk0: error -110 transferring data, sector 554206, nr 2, cmd response 0x900, card status 0x0
[  130.726967] end_request: I/O error, dev mmcblk0, sector 554206
[  136.155813] mmc0: Timeout, intmask=0x00100000
[  136.162744] mmcblk0: r/w command failed, status = 0x80900
[  136.168200] end_request: I/O error, dev mmcblk0, sector 554207
[  136.174100] EXT2-fs (mmcblk0p1): error: ext2_get_inode: unable to read inode block - inode=8000, block=244335
[  136.184091] EXT2-fs (mmcblk0p1): error: remounting filesystem read-only
kinit: init not found!

Please help, thanks heaps!

[knc1]

  136.162744] mmcblk0: r/w command failed, status = 0x80900

What is mysterious about: "command failed" ?
Would you prefer the message was written as: "Did not work" or "Your Kindle is now a spare screen for sale"

[Victoria_sxy]

Originally Posted by knc1

  136.162744] mmcblk0: r/w command failed, status = 0x80900

What is mysterious about: "command failed" ?
Would you prefer the message was written as: "Did not work" or "Your Kindle is now a spare screen for sale"

Thanks for your reply. Do you mean that nothing can help to fix my kindle? It is a spare screen now...