Folder/File Select dialog hangs calibre on Xubuntu/XFCE

tempura · 07-09-2015, 05:37 AM

Okay, so a bit of oddity which I can't really understand why, but simply put. Whenever I have to say choose a folder or file, calibre just hangs. No responses, doesn't show anything even when I run calibre-debug.

I am running calibre 2.31 on Xubuntu 14.04 32 Bit with XFCE 4.12. Not really sure, if the OS/XFCE or calibre is causing trouble.

But here's what happens, say I want to add books. I go the "Add Books" Menu and select "Add Books from a single directory". Then the Window opens up and asks me to choose the files. I select them, and then, click "Cancel" or "Open" or whatever that comes up. And, then it stops responding.

This is also noticed with when I try to Switch/Create Library, the Window opens there again, and same thing.

Though, Drag and Drop Method of Adding Books still works.

Not really sure of the cause of trouble, but any help is appreciated.

kovidgoyal · 07-09-2015, 05:44 AM

Something on your system is broken in the integration between Qt and your desktop environments file open dialog.

There was a similar thread a few months ago for someone on a Kubuntu system, they fixed it by re-installing the OS.

You can try using strace to find the cause of the issue, but for that, you need to be fairly technically sophisticated.

tempura · 07-09-2015, 05:49 AM

Thanks for the response, Kovid. Will have to figure this one out. Atleast now, I know the problem.

tempura · 07-09-2015, 10:21 AM

Phew, after a long while, I figured out the cause of trouble.

Basically, my final attempt with strace, was

Code:

strace calibre

which produced the following output when opening the dialog box and after selecting a file, went onto repeat this line along with a couple others but mainly this:

Code:

open("/home/user_name/.config/QtProject.conf.lock", O_WRONLY|O_CREAT|O_EXCL|O_LARGEFILE|O_CLOEXEC, 0644) = -1 EEXIST (File exists)
open("/home/user_name/.config/QtProject.conf.lock", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 27

So, I just deleted the "QtProject.conf.lock" from ~/.config/
And that did it. Guess, it couldn't get a lock or something. But in anycase, thanks for all the help.

beedaddy · 07-10-2015, 02:30 AM

I have a similar but not exactly the same problem. I'm running Arch Linux with the latest calibre (not the Arch package but vanilla calibre). Everything runs fine but sometimes, clicking on some menu item (for example Add Books) does not open a dialog but does nothing. Calibre then hangs and I have to terminate it. Can someone confirm this?

eschwartz · 07-10-2015, 03:23 AM

Never seen this, sorry.

ArchLinux, latest. calibre updated through my systemd timer (AUR MR).

beedaddy · 07-10-2015, 03:29 AM

Quote:

Originally Posted by eschwartz

Never seen this, sorry.

ArchLinux, latest. calibre updated through my systemd timer (AUR MR).

Perhaps it could be a ... theme related ... problem? Running Plasma 5 here with breeze theme. And you?

(EDIT: Oh and thanks for the AUR-link. I will definitely have a look at it.)

eschwartz · 07-10-2015, 03:34 AM

Out-of-the-box Cinnamon.

rodrigoccurvo · 09-16-2015, 11:26 PM

Quote:

Originally Posted by tempura

So, I just deleted the "QtProject.conf.lock" from ~/.config/
And that did it.

THANK YOU!!!

For the last few months I haven't been able to use Calibre on my Lubuntu because of that.

07-09-2015, 05:37 AM	#1
tempura Connoisseur Posts: 71 Karma: 47102 Join Date: Dec 2013 Location: Outside the Universe Device: Kindle PW3	Folder/File Select dialog hangs calibre on Xubuntu/XFCE Okay, so a bit of oddity which I can't really understand why, but simply put. Whenever I have to say choose a folder or file, calibre just hangs. No responses, doesn't show anything even when I run calibre-debug. I am running calibre 2.31 on Xubuntu 14.04 32 Bit with XFCE 4.12. Not really sure, if the OS/XFCE or calibre is causing trouble. But here's what happens, say I want to add books. I go the "Add Books" Menu and select "Add Books from a single directory". Then the Window opens up and asks me to choose the files. I select them, and then, click "Cancel" or "Open" or whatever that comes up. And, then it stops responding. This is also noticed with when I try to Switch/Create Library, the Window opens there again, and same thing. Though, Drag and Drop Method of Adding Books still works. Not really sure of the cause of trouble, but any help is appreciated.

07-09-2015, 10:21 AM	#4
tempura Connoisseur Posts: 71 Karma: 47102 Join Date: Dec 2013 Location: Outside the Universe Device: Kindle PW3	Phew, after a long while, I figured out the cause of trouble. Basically, my final attempt with strace, was Code: strace calibre which produced the following output when opening the dialog box and after selecting a file, went onto repeat this line along with a couple others but mainly this: Code: open("/home/user_name/.config/QtProject.conf.lock", O_WRONLY\|O_CREAT\|O_EXCL\|O_LARGEFILE\|O_CLOEXEC, 0644) = -1 EEXIST (File exists) open("/home/user_name/.config/QtProject.conf.lock", O_RDONLY\|O_LARGEFILE\|O_CLOEXEC) = 27 So, I just deleted the "QtProject.conf.lock" from ~/.config/ And that did it. Guess, it couldn't get a lock or something. But in anycase, thanks for all the help. Last edited by tempura; 07-09-2015 at 10:36 AM.

07-10-2015, 03:23 AM	#6
eschwartz Ex-Helpdesk Junkie Posts: 19,421 Karma: 85400180 Join Date: Nov 2012 Location: The Beaten Path, USA, Roundworld, This Side of Infinity Device: Kindle Touch fw5.3.7 (Wifi only)	Never seen this, sorry. ArchLinux, latest. calibre updated through my systemd timer (AUR MR). Last edited by eschwartz; 07-10-2015 at 03:25 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Linux - calibre 2.0 file dialog hang and workaround	Adoby	Calibre	0	08-22-2014 03:25 PM
File Open dialog causes Calibre 64bit to crash	glypto	Calibre	4	01-10-2014 04:51 AM
Calibre Hangs when connecting to Folder or File	DFT	Calibre	3	12-20-2013 04:45 PM
File/Folder Dialog errors	Remnant	Devices	4	09-26-2013 11:11 PM
Calibre hangs when adding a book file	Jellby	Calibre	26	07-15-2012 04:53 AM

07-09-2015, 05:44 AM	#2
kovidgoyal creator of calibre Posts: 45,345 Karma: 27182818 Join Date: Oct 2006 Location: Mumbai, India Device: Various	Something on your system is broken in the integration between Qt and your desktop environments file open dialog. There was a similar thread a few months ago for someone on a Kubuntu system, they fixed it by re-installing the OS. You can try using strace to find the cause of the issue, but for that, you need to be fairly technically sophisticated.

07-09-2015, 05:49 AM	#3
tempura Connoisseur Posts: 71 Karma: 47102 Join Date: Dec 2013 Location: Outside the Universe Device: Kindle PW3	Thanks for the response, Kovid. Will have to figure this one out. Atleast now, I know the problem.

07-10-2015, 02:30 AM	#5
beedaddy Addict Posts: 202 Karma: 135428 Join Date: Oct 2011 Location: Germany (south-west) Device: Kobo Libra 2 & Clara 2E, Tolino shine 5th Gen, Kindle PW6	I have a similar but not exactly the same problem. I'm running Arch Linux with the latest calibre (not the Arch package but vanilla calibre). Everything runs fine but sometimes, clicking on some menu item (for example Add Books) does not open a dialog but does nothing. Calibre then hangs and I have to terminate it. Can someone confirm this?

07-10-2015, 03:34 AM	#8
eschwartz Ex-Helpdesk Junkie Posts: 19,421 Karma: 85400180 Join Date: Nov 2012 Location: The Beaten Path, USA, Roundworld, This Side of Infinity Device: Kindle Touch fw5.3.7 (Wifi only)	Out-of-the-box Cinnamon.

Advert

Advert