Glo Ejecting SD Card

Crusader · 01-06-2014, 03:21 AM

I cant' seem to find any information on how to handle SD Cards with the Glo. Is there any steps you need to take to eject the SD card (i.e. some setting in the Glo that lets you eject the card before physically removing it)?

I take it it's a good idea to switch the device off before inserting/removing the SD card.

davidfor · 01-06-2014, 03:53 AM

I don't turn either my Glo or Touch off to eject the card. I just eject it, do whatever is needed, make sure that the device has recognised the card has gone (the home page will flash, the library list will no longer show the books) and then insert it again. I have never had a problem with this.

DNSB · 01-06-2014, 09:32 PM

In theory, SD and uSD cards are designed to be hot swappable. After a few bad experiences with smartphones, I developed the habit of powering off the device before removing or inserting the card. While I had a couple of cards decide that they were 32MB unformattable devices before I made a habit of powering off, I haven't had that happen since. Other sources have stated this was an issue unrelated to removing the card with power on. Check for 31/32mb SD card issues for more on this failure mode.

So in theory, I can pop the card in and out without power cycling but in practice, bad experiences tell me not powering off is not a good idea.

Regards,
David

jackastor · 01-07-2014, 03:21 PM

Quote:

Originally Posted by DNSB

In theory, SD and uSD cards are designed to be hot swappable. After a few bad experiences with smartphones, I developed the habit of powering off the device before removing or inserting the card. While I had a couple of cards decide that they were 32MB unformattable devices before I made a habit of powering off, I haven't had that happen since. Other sources have stated this was an issue unrelated to removing the card with power on. Check for 31/32mb SD card issues for more on this failure mode.

So in theory, I can pop the card in and out without power cycling but in practice, bad experiences tell me not powering off is not a good idea.

Regards,
David

Agreed, I have also have a couple of bad cards develop this way as well. Bottom line though, regardless of what you do its your call on how to handle things like this!

regards

Jack

shalym · 01-16-2014, 06:43 AM

Quote:

Originally Posted by DNSB

In theory, SD and uSD cards are designed to be hot swappable.
Regards,
David

Hi David--

I have a question...what is the difference between an SD card and a uSD card? This forum is the only place I have ever heard of a uSD card being discussed, and up until this post, I just figured that it was another name for a SD card. The above sentence, however tells me that they are two different things.

Shari

filmo · 01-16-2014, 07:41 AM

u is abbreviation for micro. uSD card is Micro SD card. The difference is size of card and typing fewer letters.

http://www.ewh.ieee.org/soc/ias/pub-...breviation.pdf

EndlessWaves · 01-16-2014, 08:36 AM

Actually it's μ that's the symbol for Micro, that's the greek letter mu. The Latin letter u is occasionally used as not all keyboards have a mu key, especially outside Europe. It's also often simply abbreviated to m or M.

EDIT: On topic, 'safe removal' is often to prevent a device being removed as data is written to it. I'm not that familiar with the SD card standard but if the Kobo never writes to the SD card (stores annotations etc. on the main memory) then it may be designed to be pulled out at any time.

davidfor · 01-16-2014, 05:28 PM

The Kobo devices can write to the SD card, but not very often. With current firmware, I think it will only happen during a sync to the Kobo servers.

01-06-2014, 03:21 AM	#1
Crusader Space Cadet Posts: 1,180 Karma: 4030536 Join Date: Jun 2009 Location: South Africa Device: Sony PRS-T1, Cybook Opus, Kobo Glo	Ejecting SD Card I cant' seem to find any information on how to handle SD Cards with the Glo. Is there any steps you need to take to eject the SD card (i.e. some setting in the Glo that lets you eject the card before physically removing it)? I take it it's a good idea to switch the device off before inserting/removing the SD card.

01-16-2014, 07:41 AM	#6
filmo Wizard Posts: 1,326 Karma: 1077205 Join Date: Jun 2011 Device: Kobo Touch, Sony T1, Kobo Mini	u is abbreviation for micro. uSD card is Micro SD card. The difference is size of card and typing fewer letters. http://www.ewh.ieee.org/soc/ias/pub-...breviation.pdf Last edited by filmo; 01-16-2014 at 07:53 AM.

01-16-2014, 08:36 AM	#7
EndlessWaves Zealot Posts: 119 Karma: 38158 Join Date: Jan 2014 Device: Kobo Aura HD	Actually it's μ that's the symbol for Micro, that's the greek letter mu. The Latin letter u is occasionally used as not all keyboards have a mu key, especially outside Europe. It's also often simply abbreviated to m or M. EDIT: On topic, 'safe removal' is often to prevent a device being removed as data is written to it. I'm not that familiar with the SD card standard but if the Kobo never writes to the SD card (stores annotations etc. on the main memory) then it may be designed to be pulled out at any time. Last edited by EndlessWaves; 01-16-2014 at 08:38 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem with ejecting NookST sd card with Win 7	bobcdy	Android Devices	0	02-27-2013 10:56 PM
Touch Ejecting multiple times?	vaeditor	Kobo Reader	19	07-01-2011 10:24 AM
K3 and PC: pluging & ejecting	pavelh	Amazon Kindle	10	03-17-2011 06:14 PM
Ejecting PRS 950	ccowie	Devices	4	02-25-2011 05:03 PM
Ejecting from tray-icon	Logseman	Calibre	6	03-18-2010 09:49 PM

01-06-2014, 03:53 AM	#2
davidfor Grand Sorcerer Posts: 24,905 Karma: 47303824 Join Date: Jul 2011 Location: Sydney, Australia Device: Kobo:Touch,Glo, AuraH2O, GloHD,AuraONE, ClaraHD, Libra H2O; tolinoepos	I don't turn either my Glo or Touch off to eject the card. I just eject it, do whatever is needed, make sure that the device has recognised the card has gone (the home page will flash, the library list will no longer show the books) and then insert it again. I have never had a problem with this.

01-06-2014, 09:32 PM	#3
DNSB Bibliophagist Posts: 45,541 Karma: 168929301 Join Date: Jul 2010 Location: Vancouver Device: Kobo Sage, Libra Colour, Lenovo M8 FHD, Paperwhite 4, Tolino epos	In theory, SD and uSD cards are designed to be hot swappable. After a few bad experiences with smartphones, I developed the habit of powering off the device before removing or inserting the card. While I had a couple of cards decide that they were 32MB unformattable devices before I made a habit of powering off, I haven't had that happen since. Other sources have stated this was an issue unrelated to removing the card with power on. Check for 31/32mb SD card issues for more on this failure mode. So in theory, I can pop the card in and out without power cycling but in practice, bad experiences tell me not powering off is not a good idea. Regards, David

01-16-2014, 05:28 PM	#8
davidfor Grand Sorcerer Posts: 24,905 Karma: 47303824 Join Date: Jul 2011 Location: Sydney, Australia Device: Kobo:Touch,Glo, AuraH2O, GloHD,AuraONE, ClaraHD, Libra H2O; tolinoepos	The Kobo devices can write to the SD card, but not very often. With current firmware, I think it will only happen during a sync to the Kobo servers.

Advert

Advert