Please support Imcosys V6l

[Jinz]

It's fresh new and not detected, I can only connect to the folder. The supported ebook formats are: TXT, EPUB, PDF, FB2, HTML, HTM, PDB, RTF, MOBI, DJVU, DJV, CHM, RAR, ZIP, DOC. Although this is bound to get extended as you can install your own apps on it.

Here's the device detect debug data:

Spoiler:

calibre 1.19  isfrozen: True is64bit: False
Windows-XP-5.1.2600-SP3 Windows ('32bit', 'WindowsPE')
('Windows', 'XP', '5.1.2600')
Python 2.7.5
Windows: ('XP', '5.1.2600', 'SP3', 'Multiprocessor Free')
USB devices on system:
[u'usb\\root_hub&vid10de&pid005a&rev00a2',
 u'usb\\root_hub20&vid10de&pid005b&rev00a3',
 u'usb\\vid_0424&pid_2514&rev_0;;3',
 u'usb\\vid_046a&pid_002f&rev_0102',
 u'usb\\vid_046a&pid_002f&rev_0102&mi_00',
 u'usb\\vid_046a&pid_002f&rev_0102&mi_01',
 u'usb\\vid_046d&pid_c245&rev_6900',
 u'usb\\vid_046d&pid_c245&rev_6900&mi_00',
 u'usb\\vid_046d&pid_c245&rev_6900&mi_01',
 u'usb\\vid_047d&pid_1020&rev_0100',
 u'usb\\vid_0bb4&pid_0c02&rev_0222',
 u'usb\\vid_0bb4&pid_0c02&rev_0222&mi_00',
 u'usb\\vid_0bb4&pid_0c02&rev_0222&mi_01',
 u'usb\\vid_17f6&pid_0802&rev_0210']
Unable to get free space for drive: A
(21, 'GetDiskFreeSpaceEx', 'Das Ger\xe4t ist nicht bereit.')
Unable to get free space for drive: G
(21, 'GetDiskFreeSpaceEx', 'Das Ger\xe4t ist nicht bereit.')
Drives detected:
	(0) F:\ ~ USBSTOR\DISK&VEN_IMCOV6L&PROD_&REV_0100\8&1CF5882B&0&0123456789ABCDEF&0

No disabled plugins
Looking for devices of type: MTP_DEVICE
Cannot detect MTP devices
MTP devices are not supported on Windows XP
 
Looking for devices...
	u'usb\\vid_0bb4&pid_0c02&rev_0222'
	No match found in: USBSTOR\DISK&VEN_IMCOV6L&PROD_&REV_0100\8&1CF5882B&0&0123456789ABCDEF&0
	u'usb\\vid_0bb4&pid_0c02&rev_0222&mi_00'
	No match found in: USBSTOR\DISK&VEN_IMCOV6L&PROD_&REV_0100\8&1CF5882B&0&0123456789ABCDEF&0
	u'usb\\vid_0bb4&pid_0c02&rev_0222&mi_01'
	No match found in: USBSTOR\DISK&VEN_IMCOV6L&PROD_&REV_0100\8&1CF5882B&0&0123456789ABCDEF&0
 
Devices possibly connected: None

[kovidgoyal]

Your device is not reporting its vendor and product names to windows
as can be seen looking at the debug output. Look at the lines

...VEN_IMCOV6L&PROD_&...

A properly working device would report something like:

...VEN_SONY&PROD_PRS-650&

Without this it is not possible for calibre to support your device.

You can use the Connect to folder function to connect to your device
instead. Click the Connect/Share button in calibre to access this
function.

[Jinz]

Thank you for help. I'm talking to Imcosys' support, I hope they can fix this with the next firmware revision. For now I'll do with connect to folder.

And thank you very much for work on Calibre, it's very useful software