Generate same page numbers for epub und mobi/azw

marcl · 10-11-2013, 03:44 AM

I want to read (sideloaded) books (epub) with Amazon Kindle Paperwhite and beside with my android smartphone for example with the Aldiko Reader. To do so I want to jump to the actual position (page). I don't want to use the Amazon Whyspersync but I know it works also for sideloaded documents.

With Kobo Readers there are no problemls because they count with the ADE method and for example the Aldiko Reader App the same.

Is it possible to generate the same page numbers for the mobi/azw as for the epub or is there a android reading app which interprates the "page map" same as the kindle or any other solution?

Effect should be: Same page numbering in Kindle PW and Android Reading App.

Adoby · 10-11-2013, 06:10 AM

No, I don't think it is possible. At least not using only calibre and an epub reader app. By manually inserting forced pagebreaks in the epub, while using the Kindle pagebrakes as reference, it would be possible, but most likely that is not what you are after.

chaley · 10-11-2013, 06:22 AM

I use Moon+ (pro) to read. It supports syncing reading positions across devices.

Adoby · 10-11-2013, 06:38 AM

As do Mantano, if you pay for the add on cloud feature. But it only syncs with other devices that also has Mantano installed. Not with the Kindle Reader app.

marcl · 10-11-2013, 07:50 AM

Quote:

Originally Posted by chaley

I use Moon+ (pro) to read. It supports syncing reading positions across devices.

Is it possible to sync with that method to the Kindle?

Adoby · 10-11-2013, 08:17 AM

Quote:

Originally Posted by marcl

Is it possible to sync with that method to the Kindle?

No. Not to the Kindle reading app.

chaley · 10-11-2013, 08:53 AM

Quote:

Originally Posted by Adoby

No. Not to the Kindle reading app.

As far as I can tell, the kindle reading app on the paperwhite does not support epub. Thus the OP will either need to use mobi on the PW and epub everywhere else, or (somehow) get an epub reader for the PW. The latter option seems difficult, as Amazon has blocked most if not all of the epub reader apps from the kindle section of their app store.

AnemicOak · 10-11-2013, 09:39 AM

Quote:

To do so I want to jump to the actual position (page). I don't want to use the Amazon Whyspersync but I know it works also for sideloaded documents.

Quote:

Originally Posted by marcl

Effect should be: Same page numbering in Kindle PW and Android Reading App.

AFAIK what you want can't be done using two different formats & reading platforms. You can of course use the Kindle app on your phone and jump to the same location using the same file you're using on the Paperwhite (not sure about page numbers, but locations will work).

marcl · 10-12-2013, 01:04 PM

Quote:

Originally Posted by AnemicOak

AFAIK what you want can't be done using two different formats & reading platforms. You can of course use the Kindle app on your phone and jump to the same location using the same file you're using on the Paperwhite (not sure about page numbers, but locations will work).

Ok what should work I think is: Convert source Epub into a mobi/azw (Calibre) and transfer this file to the Kindle PW and to the Kindle Android App directory on my phone. Then jump to location/page. I think Kindle Android App will not automatically sync this file to the Amazon cloud!? Otherwise I can block the Amazon Android App to go online or switch into flight mode. Don't want Amazon to monitor every page I read.

Adoby · 10-12-2013, 08:54 PM

Not sure if that will work either. I seem to recall that mobi sets pages based on the number of bytes in the data. That is including text and tags and stuff that isn't visible. After you convert a few times you may end up with the same text, but the tags and other stuff may be different. And the page breaks slightly different.

But just try it. It might work.

marcl · 10-14-2013, 02:26 AM

I tried and it worked fine with a Kindle 4 and the Kindle Android App: Convert a Epub with Calibre in azw3 and copy this file to the Kindle and the Kindle Android App. Both show the same number of locations und I can jump to the same position with a spezific location number. The Kindle Android App also worked offline and only says that it can't sync.

Seems that Calibre don't generate page numbers in azw3!?

DoctorOhh · 10-14-2013, 07:34 AM

Quote:

Originally Posted by marcl

Seems that Calibre don't generate page numbers in azw3!?

Calibre does not generate page numbers for any output format except for PDF.

Adoby · 10-14-2013, 08:06 AM

Quote:

Originally Posted by marcl

I tried and it worked fine with a Kindle 4 and the Kindle Android App: Convert a Epub with Calibre in azw3 and copy this file to the Kindle and the Kindle Android App. Both show the same number of locations und I can jump to the same position with a spezific location number. The Kindle Android App also worked offline and only says that it can't sync.

Seems that Calibre don't generate page numbers in azw3!?

I suspect that the page breaks are slightly different from the original book. But perhaps that doesn't matter?

10-11-2013, 03:44 AM	#1
marcl Enthusiast Posts: 27 Karma: 10 Join Date: Oct 2012 Device: Iriver Story HD (FW 1.13), Kobo Glo (FW 2.8.1), Kindle PW2 (FW 5.40)	Generate same page numbers for epub und mobi/azw I want to read (sideloaded) books (epub) with Amazon Kindle Paperwhite and beside with my android smartphone for example with the Aldiko Reader. To do so I want to jump to the actual position (page). I don't want to use the Amazon Whyspersync but I know it works also for sideloaded documents. With Kobo Readers there are no problemls because they count with the ADE method and for example the Aldiko Reader App the same. Is it possible to generate the same page numbers for the mobi/azw as for the epub or is there a android reading app which interprates the "page map" same as the kindle or any other solution? Effect should be: Same page numbering in Kindle PW and Android Reading App. Last edited by marcl; 10-11-2013 at 03:51 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kindle (AZW3/MOBI) ebooks with "real page numbers" to PDF with same page numbers?	abvgd	Conversion	2	05-24-2013 01:24 PM
End notes in mobi/azw to ePub	AlexBell	Conversion	2	03-03-2011 02:39 AM
How does this device generate page numbers?	hal9000	Netronix	3	11-08-2010 06:14 PM
instapaper.com - Bookmarks service that generate epub and mobi books	celson	Ectaco jetBook	3	03-13-2010 11:10 PM
Problems with Mobi page numbers	marvmax	Kindle Formats	8	09-01-2008 09:15 PM

10-11-2013, 06:10 AM	#2
Adoby Handy Elephant Posts: 1,737 Karma: 26785684 Join Date: Dec 2009 Location: Southern Sweden, far out in the quiet woods Device: Samsung Galaxy Tab S8 Ultra	No, I don't think it is possible. At least not using only calibre and an epub reader app. By manually inserting forced pagebreaks in the epub, while using the Kindle pagebrakes as reference, it would be possible, but most likely that is not what you are after.

10-11-2013, 06:22 AM	#3
chaley Grand Sorcerer Posts: 12,436 Karma: 8012886 Join Date: Jan 2010 Location: Notts, England Device: Kobo Libra 2	I use Moon+ (pro) to read. It supports syncing reading positions across devices.

10-11-2013, 06:38 AM	#4
Adoby Handy Elephant Posts: 1,737 Karma: 26785684 Join Date: Dec 2009 Location: Southern Sweden, far out in the quiet woods Device: Samsung Galaxy Tab S8 Ultra	As do Mantano, if you pay for the add on cloud feature. But it only syncs with other devices that also has Mantano installed. Not with the Kindle Reader app.

10-12-2013, 08:54 PM	#10
Adoby Handy Elephant Posts: 1,737 Karma: 26785684 Join Date: Dec 2009 Location: Southern Sweden, far out in the quiet woods Device: Samsung Galaxy Tab S8 Ultra	Not sure if that will work either. I seem to recall that mobi sets pages based on the number of bytes in the data. That is including text and tags and stuff that isn't visible. After you convert a few times you may end up with the same text, but the tags and other stuff may be different. And the page breaks slightly different. But just try it. It might work.

10-14-2013, 02:26 AM	#11
marcl Enthusiast Posts: 27 Karma: 10 Join Date: Oct 2012 Device: Iriver Story HD (FW 1.13), Kobo Glo (FW 2.8.1), Kindle PW2 (FW 5.40)	I tried and it worked fine with a Kindle 4 and the Kindle Android App: Convert a Epub with Calibre in azw3 and copy this file to the Kindle and the Kindle Android App. Both show the same number of locations und I can jump to the same position with a spezific location number. The Kindle Android App also worked offline and only says that it can't sync. Seems that Calibre don't generate page numbers in azw3!?

Advert

Advert