PRS-T1 DIY PRS-T1 case

[bibahbuzemann]

This one is probably the fastest way to protect your reader under normal conditions and make a very elegant cover.

The precondition is, however, that you have, or can find, a wallet with the dimentions 4.5" x 7". This is not exactly standard, but not entirely uncommon, as it fits snugly into the inside pocket of men's blazers.

- cut a piece of stiff plastic(or cardboard) to a size about the same, but smaller than, the T1
- insert piece into one of the wallet's sleeves to ensure good fit, cut to shape
- place a strip of scotch tape along the edge of piece
- adjust piece in sleeve, adjust position of T1
- press
- remove T1 and piece(which should now adhere)
- fold back piece and add second strip of tape to inside of "hinge"

Depending on the tape used, this will last from a few days to a couple of weeks.

Time required:
5 min, <1 min if repeated

Cost:
$0 - $price of wallet

ps: I forgot my camara earlier tonight and the damned thing in this cellphone is busted. I won't be home till Chirstmas so there won't be any pics from me in time either.