Version not incrementing

rbruceporter · 11-27-2010, 03:51 PM

My copy of Calibre keeps insisting that it is version 0.7.28. I have installed the latest version 0.7.31 today, but even though the installation completed successfully it still insists it is 0.7.28.

I have rebooted, removed, and reinstalled Calibre from scratch and it does not help. I get no errors, just the constant nag that it is not the correct version.

I have checked the file version on the drive, and it is indeed 0.7.31? Any help would be greatly appreciated.

My system is Windows 7 64-bit Professional. I have not previously had issues with upgrading from version to version before this.

One oddity about my setup, Calibre's libraries are on a shared drive on a Windows Home Server. But until now this has not caused any issues.

Thanks in advance!

Robert Porter

kovidgoyal · 11-27-2010, 03:52 PM

you probably have two calibre installs on your machine and you are launching the old one.

rbruceporter · 11-27-2010, 04:06 PM

I hoped that might be the case, but I drilled into the Program Files(x86) folder, found Calibre2 directory, right clicked the exe, checked the version, and it was 0.7.31. I launched the exe directly and have the same problem?

Where does Calibre check it's current version from?

Thanks again!

kovidgoyal · 11-27-2010, 04:12 PM

is there an asterisk next to the version number in the calibre interface?

Perkin · 11-27-2010, 04:13 PM

Check the shortcut you use to launch calibre, to see where it's path is pointing to and check if it is where you thought it is.

rbruceporter · 11-27-2010, 04:15 PM

There is an asterisk next to the version number. What does that mean?

Thanks!

Robert

rbruceporter · 11-27-2010, 04:16 PM

I checked the shortcut and it is indeed pointing at the correct location. The file at that location has 0.7.31 as its file and internal versions.

kovidgoyal · 11-27-2010, 04:22 PM

that means you are running calibre from source

rbruceporter · 11-27-2010, 04:23 PM

I did download the source to view it and see if I could contribute, but had no idea it would run from there. Is there any way to override that and run it from the exe or source as I choose?

rbruceporter · 11-27-2010, 04:30 PM

I am primarily a .NET and Java developer. Python development is new to me.

kiwidude · 11-27-2010, 04:33 PM

Quote:

Originally Posted by rbruceporter

I did download the source to view it and see if I could contribute, but had no idea it would run from there. Is there any way to override that and run it from the exe or source as I choose?

You had to set an environment variable to get it to run from source of CALIBRE_DEVELOP_FROM. Remove that and it will run from the exe.

rbruceporter · 11-27-2010, 04:39 PM

Excellent, renamed CAILBRE_DEVELOP_FROM to XXCALIBRE_DEVELOP_FROM and it runs fine, also updated source via bzr merge and now the source version is correct as well! Thanks!

11-27-2010, 03:51 PM	#1
rbruceporter Member Posts: 16 Karma: 10 Join Date: Nov 2010 Location: Raleigh, NC USA Device: Color Nook	Version not incrementing My copy of Calibre keeps insisting that it is version 0.7.28. I have installed the latest version 0.7.31 today, but even though the installation completed successfully it still insists it is 0.7.28. I have rebooted, removed, and reinstalled Calibre from scratch and it does not help. I get no errors, just the constant nag that it is not the correct version. I have checked the file version on the drive, and it is indeed 0.7.31? Any help would be greatly appreciated. My system is Windows 7 64-bit Professional. I have not previously had issues with upgrading from version to version before this. One oddity about my setup, Calibre's libraries are on a shared drive on a Windows Home Server. But until now this has not caused any issues. Thanks in advance! Robert Porter

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New version 1.3.0.0 available	mikelv	EPUBReader	26	08-06-2010 09:03 AM
New version 1.2.9.0 available	mikelv	EPUBReader	7	07-19-2010 11:10 AM
New version available	mikelv	EPUBReader	14	12-09-2009 12:33 AM
version 6.11	HawaiianLungs	Calibre	3	09-12-2009 11:11 AM
Old version 0.4.83 available?	don1011	Calibre	3	09-26-2008 02:16 PM

11-27-2010, 03:52 PM	#2
kovidgoyal creator of calibre Posts: 45,251 Karma: 27110894 Join Date: Oct 2006 Location: Mumbai, India Device: Various	you probably have two calibre installs on your machine and you are launching the old one.

11-27-2010, 04:06 PM	#3
rbruceporter Member Posts: 16 Karma: 10 Join Date: Nov 2010 Location: Raleigh, NC USA Device: Color Nook	I hoped that might be the case, but I drilled into the Program Files(x86) folder, found Calibre2 directory, right clicked the exe, checked the version, and it was 0.7.31. I launched the exe directly and have the same problem? Where does Calibre check it's current version from? Thanks again!

11-27-2010, 04:12 PM	#4
kovidgoyal creator of calibre Posts: 45,251 Karma: 27110894 Join Date: Oct 2006 Location: Mumbai, India Device: Various	is there an asterisk next to the version number in the calibre interface?

11-27-2010, 04:13 PM	#5
Perkin Guru Posts: 657 Karma: 64171 Join Date: Sep 2010 Location: Kent, England, Sol 3, ZZ9 plural Z Alpha Device: Sony PRS-300, Kobo Aura HD, iPad (Marvin)	Check the shortcut you use to launch calibre, to see where it's path is pointing to and check if it is where you thought it is.

11-27-2010, 04:15 PM	#6
rbruceporter Member Posts: 16 Karma: 10 Join Date: Nov 2010 Location: Raleigh, NC USA Device: Color Nook	There is an asterisk next to the version number. What does that mean? Thanks! Robert

11-27-2010, 04:16 PM	#7
rbruceporter Member Posts: 16 Karma: 10 Join Date: Nov 2010 Location: Raleigh, NC USA Device: Color Nook	I checked the shortcut and it is indeed pointing at the correct location. The file at that location has 0.7.31 as its file and internal versions.

11-27-2010, 04:22 PM	#8
kovidgoyal creator of calibre Posts: 45,251 Karma: 27110894 Join Date: Oct 2006 Location: Mumbai, India Device: Various	that means you are running calibre from source

11-27-2010, 04:23 PM	#9
rbruceporter Member Posts: 16 Karma: 10 Join Date: Nov 2010 Location: Raleigh, NC USA Device: Color Nook	I did download the source to view it and see if I could contribute, but had no idea it would run from there. Is there any way to override that and run it from the exe or source as I choose?

11-27-2010, 04:30 PM	#10
rbruceporter Member Posts: 16 Karma: 10 Join Date: Nov 2010 Location: Raleigh, NC USA Device: Color Nook	I am primarily a .NET and Java developer. Python development is new to me.

11-27-2010, 04:39 PM	#12
rbruceporter Member Posts: 16 Karma: 10 Join Date: Nov 2010 Location: Raleigh, NC USA Device: Color Nook	Excellent, renamed CAILBRE_DEVELOP_FROM to XXCALIBRE_DEVELOP_FROM and it runs fine, also updated source via bzr merge and now the source version is correct as well! Thanks!

Advert

Advert