Clara HD Display time when reading - Page 36

NiLuJe · 06-15-2021, 07:09 PM

Deobulakenyo · 10-04-2021, 10:16 PM

These are all foreign to me. I just want to put a clock and battery percent on the book screen while reading (and use header and footer at the same time). is this possible?

Do i have to change the offsets from the example config file or i can use the example as is?

# Date format string ( see 'man strftime' )
#
# In addition may also use {month}, {day}, {battery}.
# (Look for battery and locale settings further below).
#
# {debug} will show the event that caused the update
#
format=%a %b %d %H:%M

#
# Where to print the clock
#
offset_x=0
offset_y=0

Phil_C · 10-04-2021, 10:48 PM

You can use:

format={battery} %H:%M

I believe the information will be displayed in the top left corner of the screen. If you want it elsewhere, you need to change the row and column and/or the offsets.

If you use a truetype font, the settings are later in the .ini file. You can also change the battery % range that will display.

It's all explained in the comments within the file.

Install and experiment.

Deobulakenyo · 10-05-2021, 01:34 AM

Thank you.

which is better for the libra? miniclock or nanoclock?

NiLuJe · 10-05-2021, 10:01 AM

NanoClock is more recent, and should provide a more seamless experience on your device

.

Barbara1955 · 10-05-2021, 01:05 PM

For some reason my Clara did a update. Now I can see a CLOCK But it only tells me how many mins left in Chapter!
IS there a way to set it for proper time?

davidfor · 10-05-2021, 08:28 PM

Quote:

Originally Posted by Barbara1955

For some reason my Clara did a update. Now I can see a CLOCK But it only tells me how many mins left in Chapter!
IS there a way to set it for proper time?

That is not a clock. That is the chapter progress. There are options in the Reader settings to choose how the chapter and book status are displayed (as percentage, page numbers or time left). Or if they are displayed at all. These have also been in the firmware for at least a couple of years, so you must have been behind in firmware updates. But, there should now be a clock in the top-right corner when the menu bars are displayed.

Mrs_Often · 09-30-2023, 11:38 AM

Quote:

Originally Posted by NiLuJe

NanoClock is more recent, and should provide a more seamless experience on your device

.

Hmmmm so I have been using MiniClock for aaaaaages and love it. I was refusing to update my Clara HD from firmware version 4.25, which was running MiniClock 20200711.

I've just finally given in and updated to firmware 4.38 and expected to have to update MiniClock or move to NanoClock... but good old MiniClock seems to be working fine.

Is there any reason to go through the hassle of either updating or moving to NanoClock?

Thanks!

EDIT: Hmmm nevermind! I was curious enough to install NanoClock just to have a look and like it much better. Bye bye MiniClock!

sherman · 10-04-2023, 07:56 PM

Quote:

Originally Posted by Mrs_Often

Hmmmm so I have been using MiniClock for aaaaaages and love it. I was refusing to update my Clara HD from firmware version 4.25, which was running MiniClock 20200711.

I've just finally given in and updated to firmware 4.38 and expected to have to update MiniClock or move to NanoClock... but good old MiniClock seems to be working fine.

Is there any reason to go through the hassle of either updating or moving to NanoClock?

Thanks!

EDIT: Hmmm nevermind! I was curious enough to install NanoClock just to have a look and like it much better. Bye bye MiniClock!

If you don't require advanced positioning/custom fonts etc, there's also my NickelClock, which works very well.

06-15-2021, 07:09 PM	#526
NiLuJe BLAM! Posts: 13,506 Karma: 26047190 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	I, err, may have done it again ;p.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I (almost) spend more time reading about e-readers than e-reading	Antoinekamel	General Discussions	15	02-25-2013 10:48 AM
360 PB360 display gets "stripes" from time to time	klaetsch	PocketBook	1	01-05-2011 04:49 AM
How to get the time to display	synic	Sony Reader	9	06-10-2009 06:05 PM
Time Display	Jenny123	Sony Reader	2	04-23-2009 02:06 PM
Time Display?	MickeyC	Sony Reader	3	02-10-2008 11:57 PM

10-04-2021, 10:16 PM	#527
Deobulakenyo Guru Posts: 706 Karma: 2153490 Join Date: Aug 2021 Location: Stupid Philippines Device: Kobo Libra 2, Boyue Likebook P78	These are all foreign to me. I just want to put a clock and battery percent on the book screen while reading (and use header and footer at the same time). is this possible? Do i have to change the offsets from the example config file or i can use the example as is? # Date format string ( see 'man strftime' ) # # In addition may also use {month}, {day}, {battery}. # (Look for battery and locale settings further below). # # {debug} will show the event that caused the update # format=%a %b %d %H:%M # # Where to print the clock # offset_x=0 offset_y=0

10-04-2021, 10:48 PM	#528
Phil_C Addict Posts: 274 Karma: 391602 Join Date: Oct 2009 Location: Chicago, IL USA Device: Sony PRS-350; Kobo Clara HD; Kobo Clara 2E; Kobo Clara BW	You can use: format={battery} %H:%M I believe the information will be displayed in the top left corner of the screen. If you want it elsewhere, you need to change the row and column and/or the offsets. If you use a truetype font, the settings are later in the .ini file. You can also change the battery % range that will display. It's all explained in the comments within the file. Install and experiment.

10-05-2021, 01:34 AM	#529
Deobulakenyo Guru Posts: 706 Karma: 2153490 Join Date: Aug 2021 Location: Stupid Philippines Device: Kobo Libra 2, Boyue Likebook P78	Thank you. which is better for the libra? miniclock or nanoclock?

10-05-2021, 10:01 AM	#530
NiLuJe BLAM! Posts: 13,506 Karma: 26047190 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	NanoClock is more recent, and should provide a more seamless experience on your device .

10-05-2021, 01:05 PM	#531
Barbara1955 Non-Techy Posts: 4,455 Karma: 15499273 Join Date: Feb 2011 Location: WV---USA Device: Samsung Cell Phone & Amazon Fires & Kobo eReaders	For some reason my Clara did a update. Now I can see a CLOCK But it only tells me how many mins left in Chapter! IS there a way to set it for proper time?