Just used silver duct tape, a pen knife and scissors. It seems to work quite well. You need to use a new length of duct tape for each side. Cut a long enough piece of tape for one side and put it on properly along the edge so it covers the part that reflects but not the part that shows the text. Fold it in, cut it along the side with the pen knife, and pull the extra tape off (making sure the cut is sufficient). Repeat for the 3 outer sides. For the inner side, just put a piece of duct tape over the reflective part and cut it along the black surface where you want. The only problem with this is that you may mark the plastic with the pen knife, but it seems to work quite well. Unlike paint, it can be undone (unless you've cut the plastic).
|