MobileRead Forums - View Single Post - Finding a recovery path with Freescale's Advanced Toolkit

knc1 · 07-08-2012, 10:26 AM

If you put your K3 in the "factory diagnostics" mode, you could get those details from the battery management system.
But that isn't possible (that I know of) when the K3 will not run.

Perhaps someone else can do that and report.
I'll save you searching for the "HowTo" -
Put the (empty is ok) filename: ENABLE_DIAGS in your USB storage area, unplug USB cable, re-boot the K3. Wait. No, you didn't break it. Wait some more.

07-08-2012, 10:26 AM	#72
knc1 Going Viral Posts: 17,212 Karma: 18210809 Join Date: Feb 2012 Location: Central Texas Device: No K1, PW2, KV, KOA	If you put your K3 in the "factory diagnostics" mode, you could get those details from the battery management system. But that isn't possible (that I know of) when the K3 will not run. Perhaps someone else can do that and report. I'll save you searching for the "HowTo" - Put the (empty is ok) filename: ENABLE_DIAGS in your USB storage area, unplug USB cable, re-boot the K3. Wait. No, you didn't break it. Wait some more.