View Single Post
Old 09-05-2006, 11:26 AM   #1
design256
Connoisseur
design256 doesn't litterdesign256 doesn't litter
 
Posts: 78
Karma: 103
Join Date: Aug 2006
Location: Ipswich, UK
Device: Irex Iliad
The six unused connections

I have finally had a chance to look at the spare connections on the Iliad. This is what I found:

13 - wired to 17 in the plug, but held to ground when disconnected
14 - High impedance, either an input or N/C
15 - signal on this line (see below)
16 - held to ground
17 - wired to 13, high impedance when disconnected, probably plug sense input
18 - High impedance, either an input or N/C


The only interesting pin was 15. This is nominally high (3.5v), but emits a start bit followed series of 16 data bits at approximately 9600 baud whenever a key is pressed or released. As far as I can tell, no other data (like a console) is present on this pin.


Sometime soon I'll take the thing apart and have a poke around inside for anything that might be a console.
design256 is offline   Reply With Quote