MobileRead Forums - View Single Post

Tangent · 10-28-2011, 12:23 PM

When you go to set up your Vox you must be able to connect to a wireless network so if you can't I don't believe that you can use this device at all, not even simply as an eReader.

There is no way to determine the device's MAC address until you've finished with the setup... so make sure you have your router set to allow any device's MAC address to connect with a proper password.

The MAC address was not easy to locate afterward and I can't quite remember how I found it... still new to using it, but it is buried in the menus somewhere.

Once setup begins the Vox immediately downloads and installs a new firmware update so be patient... this is gonna take some time.

After the setup, in the library area you can then download the user guide.

That' where I'm at now but I thought I would post about the MAC address for those who's router is set to accept only specific addresses.

10-28-2011, 12:23 PM	#1
Tangent Member Posts: 18 Karma: 10 Join Date: Aug 2011 Device: Kobo Touch	Setting up your Vox When you go to set up your Vox you must be able to connect to a wireless network so if you can't I don't believe that you can use this device at all, not even simply as an eReader. There is no way to determine the device's MAC address until you've finished with the setup... so make sure you have your router set to allow any device's MAC address to connect with a proper password. The MAC address was not easy to locate afterward and I can't quite remember how I found it... still new to using it, but it is buried in the menus somewhere. Once setup begins the Vox immediately downloads and installs a new firmware update so be patient... this is gonna take some time. After the setup, in the library area you can then download the user guide. That' where I'm at now but I thought I would post about the MAC address for those who's router is set to accept only specific addresses.