MobileRead Forums - View Single Post

hostar · 07-06-2012, 04:46 PM

First: there is no need to flash diags with mmcblk0p2.img at K4NT, because SSH is already there.

Second: kernel version must be same as firmware version. Is your firmware version 4.0.1 ?

Third: you might to try before anything else set bootmode over SSH.
Connect to SSH and write following lines one by one.

idme -d --bootmode main
sync
reboot

07-06-2012, 04:46 PM	#2
hostar Zealot Posts: 138 Karma: 12324 Join Date: Dec 2011 Location: CZ Device: Kindle 4 non-touch	First: there is no need to flash diags with mmcblk0p2.img at K4NT, because SSH is already there. Second: kernel version must be same as firmware version. Is your firmware version 4.0.1 ? Third: you might to try before anything else set bootmode over SSH. Connect to SSH and write following lines one by one. idme -d --bootmode main sync reboot Last edited by hostar; 07-06-2012 at 04:51 PM.