MobileRead Forums - View Single Post

embryo · 09-19-2015, 09:24 PM

v1.7.6.0
- Problematic PyInstaller Windows executable.

v1.7.5.0
- Added PySide6 support.
- "Find in Books" for a highlight was finding the book but did not select the highlight.

v1.7.4.0
- Some problems with relative paths in Linux.

v1.7.3.0
- Could not parse highlights due to changes in KOReader latest release.

v1.7.2.0
- This is a Windows only release that fixes the startup problem that v1.7.1.0 introduced.

v1.7.1.0
- This is a Windows only release that adds a portable mode for... Windows.
  When KOHighlights runs in Portable mode, will use a portable_settings directory to store its settings, that is located inside the installation directory of the app.
  Because of this, it is advised to not install the app inside the Program Files folder if you indent to use it as portable.
  There are two ways to start the app in Portable mode:
  - Run the KoHighlights Portable.exe that is located next to the KoHighlights.exe.
  - Run KoHighlights.exe with a -p argument. E.g. create a shortcut for the KoHighlights.exe and add a space and a -p argument at the end of the target filename.

v1.7.0.0
- Export highlights as markdown files.
- Chapter title is available as part of the highlight data.
- The document path from the metadata is used to locate the book if the .sdr folder is in the "DocSettings" directory of KOReader.
- Fixed: "Scan Directory" and "About" shortcuts weren't working.

v1.6.0.0
- New toolbar button "Filter" to filter the current view's items by searching for keywords in Highlights and/or Comments and/or Book titles..
- Added an arrow to the "Archived" view button, to invoke a drop-down menu with actions for the Archive database (other than right-clicking on it)
- Problem when exporting highlights from books with very long filenames (Github issue here).</li>

v1.5.0.0
- "Show in Highlights" menu has a new entry, "Date Format", where you can customize the appearance of the date using format codes (info here).
  This influences the way the date is formatted when the highlights are exported, and the way its presented at the "Book Info" panel.
  It is not supported in the CLI side of the app though.
- Fixed exporting highlights to csv from "Highlights View" that did not work.
- Fixed some display problem when the system uses a dark theme.

v1.4.4.0
- A new column with the number of comments.
- User's review is visible in "Book Info", if one exists.
- More checks are added to the highlight extraction from the metadata file.

v1.4.2.0
- Right clicking the "Archived" button produces a menu with actions for the Archive database. That way we can use a database file that is located anywhere, even on the cloud.
- Exporting without the Page numbers but sorted "By Date" hung the app.
- Exporting highlights from multiple books to individual files produced text files that contained html code or the opposite.

v1.4.0.0
- Export highlights to csv is now supported (in GUI and CLI), using tabs as separators and double quotes (") as text qualifiers.
- Selecting the exported file type/mode is done with popup questions.

v1.3.0.0
- Option to sync/merge a loaded book with a metadata file from any location.
- Option to recalculate (and re-save in the metadata) the MD5 for a book.
- Option to open the selected book's metadata location with the system's file manager.
- Keyboard shortcuts to copy selected highlights/comments.
- All found "metadata.lua" files are loaded (if more than one are present in the .sdr directory).
- When checking if two books are the same (for sync/merge), the app now uses any MD5 present in the book's metadata, and if none exists, it calculates one.
- Fixed: Canceling export of highlights still opened a "Success" dialog.
- Fixed: Sometimes the modified date had decimal digits.
- Fixed: Some cosmetic bugs.

v1.2.2.0
- Option to ignore the English articles at the start of the title while sorting.
- Option to merge highlights/sync position with the archived version (using right click on loaded book).
- New "Rating" column.
- There is an optional question dialog when adding/merging books in the archive.
- "Abandoned" book rows now have red text.
- Single launch App.
- No more Linux.x86 binary (nobody used it anyways...).
- Fixed: Some problems with drag&dropping books.
- Fixed: Wrong "Delete" button when in Archived mode.
- Fixed: Better Python 3 compatibility (for the .py version).

v1.0.0.0
- New Archive mode. Using a local database in which we can add/upgrade any loaded book's metadata (with the highlights of course) that we get from the reader, and access it even if the reader is not connected.
- We can now export to html from "Highlights" view too.
- The user interface has 2 modes now ("Loaded" and "Archived"). In any of these modes we can view the highlights using two views: as rows of "Books" or as rows of "Highlights".
- Fixed: Could not hide Comments while viewing or exporting highlights.
- Fixed: Drag & dropping multiple folders, was loading only the last one.

Older versions:

Spoiler:

v0.9.1.0
- Code refactoring.
- Fixed: Comments in highlights with more than one paragraphs could not get changed.

v0.9.0.0
- Option to export highlights in HTML format.
- Linux binaries now support the command-line interface.
- Fixed: The sorting direction (ascending-descending) sometimes was not saved.

v0.8.0.0
- Option to change the size of the toolbar buttons with right-click.
- Linux binaries for x86/x64 with PyInstaller.
- The Python script has now a command-line interface for batch conversions.
- Fixed: The Python script can run with Python2/3.
- Fixed: Reloading the same files after clearing the book list, works now.

v0.7.0.0
- Option to sort highlights by Date or Page (in "Books" view).
v0.6.1.0
- Merging the highlights of a book that is read in two different devices is now possible (beta). It must be from the same reader engine though. Read about it here.
- Syncing the reading position for a book that is read in two different devices is also possible now.
- We can now edit highlight comments while in the "Highlights" view, using the right-click menu or double clicking.
- From "Highlights" view, using the right-click menu, we can locate the current highlight to the "Books" view.
- Changed: When scanning a directory using the "Scan Directory" button, the previously loaded books are not unloaded from the list.
- Fixed: The same book's metadata are not loaded more than one time any more.
- Fixed: The book's description text is now read only (as it should).
v0.5.0.0
- In "Highlights View", using the right-click menu, we can copy to clipboard the selected highlights/comments.
- Added "Tags" and "Description" to the "Book Info".
- Removed "Total time" and "Status" from the "Book Info" because the relevant keys where removed from the more current KoReader versions' metadata.
- Fixed: Some highlights where missing when exported to text file.
- Fixed: Better handling of lua comments.
v0.4.0.0
- New "Highlights View", where we can see all the highlights from the opened books and sort them by date, book etc.
- Fixed: Update book info when navigating using the arrows.
v0.3.5.0
- Support for comments (kind of), using the "Edit" highlight option of KoReader (click on a highlight).
- Edit/Add/Delete a highlight's comment.
- Fixed: Deleting an "Edited" highlight could not delete the associated bookmark too.
- Fixed: New lines in the highlight are now properly displayed.
v0.3.4.0
- Delete some or all the highlights from a book.
- Copy some or all the highlights from a book in the clipboard.
- Highlights are now a list with items that can be selected individually for copy/deletion, not just a text.
- Highlight's elements like page, date and even highlight text can be individually turned on/off.
- Fixed: If there was more than one highlight in a page, only the first was displayed.
- Fixed: Right click menu appeared even if the book list was empty.
v0.3.2.0
- Page & Date reference for each highlight.
- Option to show/hide page & date info that also affects if that info is going to be written in the saved text files.
- Highlights are now sorted by page number.
- Right clicking and selecting "View Book" did nothing.
- If another file was in an '.sdr' folder (like an '.old' backup file) it could be selected instead of the normal metadata file.
- Saved texts were displayed wrong in Windows Notepad due to Unix line breaks.
v0.3.1.2
- New "Book Info" panel.
- Option to delete the .sdr folders for specific books or even the books themselves.
- Option to view a book with the system's viewer.
- Added "Book Type" and "Read percent" columns.
- Color-coded rows based on Finished/Completed state and the presence or not of the actual book.
v0.2.1.1
- Added a "Modified" date column and option to pass
  folders or files as arguments.
v0.2.0.1
- Totally re-written application with new GUI
- New GitHub repository
- Initial release
v0.1.5
- Release version, nothing more to add
v0.1.1
- Better Highlights detection
- Cosmetic changes
v0.1.0
- Initial release

09-19-2015, 09:24 PM	#2
embryo Fanatic Posts: 509 Karma: 60774 Join Date: Aug 2013 Device: Kobo Glo, GloHD	v1.7.6.0 Problematic PyInstaller Windows executable. v1.7.5.0 Added PySide6 support. "Find in Books" for a highlight was finding the book but did not select the highlight. v1.7.4.0 Some problems with relative paths in Linux. v1.7.3.0 Could not parse highlights due to changes in KOReader latest release. v1.7.2.0 This is a Windows only release that fixes the startup problem that v1.7.1.0 introduced. v1.7.1.0 This is a Windows only release that adds a portable mode for... Windows. When KOHighlights runs in Portable mode, will use a portable_settings directory to store its settings, that is located inside the installation directory of the app. Because of this, it is advised to not install the app inside the Program Files folder if you indent to use it as portable. There are two ways to start the app in Portable mode: Run the KoHighlights Portable.exe that is located next to the KoHighlights.exe. Run KoHighlights.exe with a -p argument. E.g. create a shortcut for the KoHighlights.exe and add a space and a -p argument at the end of the target filename. v1.7.0.0 Export highlights as markdown files. Chapter title is available as part of the highlight data. The document path from the metadata is used to locate the book if the .sdr folder is in the "DocSettings" directory of KOReader. Fixed: "Scan Directory" and "About" shortcuts weren't working. v1.6.0.0 New toolbar button "Filter" to filter the current view's items by searching for keywords in Highlights and/or Comments and/or Book titles.. Added an arrow to the "Archived" view button, to invoke a drop-down menu with actions for the Archive database (other than right-clicking on it) Problem when exporting highlights from books with very long filenames (Github issue here).</li> v1.5.0.0 "Show in Highlights" menu has a new entry, "Date Format", where you can customize the appearance of the date using format codes (info here). This influences the way the date is formatted when the highlights are exported, and the way its presented at the "Book Info" panel. It is not supported in the CLI side of the app though. Fixed exporting highlights to csv from "Highlights View" that did not work. Fixed some display problem when the system uses a dark theme. v1.4.4.0 A new column with the number of comments. User's review is visible in "Book Info", if one exists. More checks are added to the highlight extraction from the metadata file. v1.4.2.0 Right clicking the "Archived" button produces a menu with actions for the Archive database. That way we can use a database file that is located anywhere, even on the cloud. Exporting without the Page numbers but sorted "By Date" hung the app. Exporting highlights from multiple books to individual files produced text files that contained html code or the opposite. v1.4.0.0 Export highlights to csv is now supported (in GUI and CLI), using tabs as separators and double quotes (") as text qualifiers. Selecting the exported file type/mode is done with popup questions. v1.3.0.0 Option to sync/merge a loaded book with a metadata file from any location. Option to recalculate (and re-save in the metadata) the MD5 for a book. Option to open the selected book's metadata location with the system's file manager. Keyboard shortcuts to copy selected highlights/comments. All found "metadata.lua" files are loaded (if more than one are present in the .sdr directory). When checking if two books are the same (for sync/merge), the app now uses any MD5 present in the book's metadata, and if none exists, it calculates one. Fixed: Canceling export of highlights still opened a "Success" dialog. Fixed: Sometimes the modified date had decimal digits. Fixed: Some cosmetic bugs. v1.2.2.0 Option to ignore the English articles at the start of the title while sorting. Option to merge highlights/sync position with the archived version (using right click on loaded book). New "Rating" column. There is an optional question dialog when adding/merging books in the archive. "Abandoned" book rows now have red text. Single launch App. No more Linux.x86 binary (nobody used it anyways...). Fixed: Some problems with drag&dropping books. Fixed: Wrong "Delete" button when in Archived mode. Fixed: Better Python 3 compatibility (for the .py version). v1.0.0.0 New Archive mode. Using a local database in which we can add/upgrade any loaded book's metadata (with the highlights of course) that we get from the reader, and access it even if the reader is not connected. We can now export to html from "Highlights" view too. The user interface has 2 modes now ("Loaded" and "Archived"). In any of these modes we can view the highlights using two views: as rows of "Books" or as rows of "Highlights". Fixed: Could not hide Comments while viewing or exporting highlights. Fixed: Drag & dropping multiple folders, was loading only the last one. Older versions: Spoiler: v0.9.1.0 Code refactoring. Fixed: Comments in highlights with more than one paragraphs could not get changed. v0.9.0.0 Option to export highlights in HTML format. Linux binaries now support the command-line interface. Fixed: The sorting direction (ascending-descending) sometimes was not saved. v0.8.0.0 Option to change the size of the toolbar buttons with right-click. Linux binaries for x86/x64 with PyInstaller. The Python script has now a command-line interface for batch conversions. Fixed: The Python script can run with Python2/3. Fixed: Reloading the same files after clearing the book list, works now. v0.7.0.0 Option to sort highlights by Date or Page (in "Books" view). v0.6.1.0 Merging the highlights of a book that is read in two different devices is now possible (beta). It must be from the same reader engine though. Read about it here. Syncing the reading position for a book that is read in two different devices is also possible now. We can now edit highlight comments while in the "Highlights" view, using the right-click menu or double clicking. From "Highlights" view, using the right-click menu, we can locate the current highlight to the "Books" view. Changed: When scanning a directory using the "Scan Directory" button, the previously loaded books are not unloaded from the list. Fixed: The same book's metadata are not loaded more than one time any more. Fixed: The book's description text is now read only (as it should). v0.5.0.0 In "Highlights View", using the right-click menu, we can copy to clipboard the selected highlights/comments. Added "Tags" and "Description" to the "Book Info". Removed "Total time" and "Status" from the "Book Info" because the relevant keys where removed from the more current KoReader versions' metadata. Fixed: Some highlights where missing when exported to text file. Fixed: Better handling of lua comments. v0.4.0.0 New "Highlights View", where we can see all the highlights from the opened books and sort them by date, book etc. Fixed: Update book info when navigating using the arrows. v0.3.5.0 Support for comments (kind of), using the "Edit" highlight option of KoReader (click on a highlight). Edit/Add/Delete a highlight's comment. Fixed: Deleting an "Edited" highlight could not delete the associated bookmark too. Fixed: New lines in the highlight are now properly displayed. v0.3.4.0 Delete some or all the highlights from a book. Copy some or all the highlights from a book in the clipboard. Highlights are now a list with items that can be selected individually for copy/deletion, not just a text. Highlight's elements like page, date and even highlight text can be individually turned on/off. Fixed: If there was more than one highlight in a page, only the first was displayed. Fixed: Right click menu appeared even if the book list was empty. v0.3.2.0 Page & Date reference for each highlight. Option to show/hide page & date info that also affects if that info is going to be written in the saved text files. Highlights are now sorted by page number. Right clicking and selecting "View Book" did nothing. If another file was in an '.sdr' folder (like an '.old' backup file) it could be selected instead of the normal metadata file. Saved texts were displayed wrong in Windows Notepad due to Unix line breaks. v0.3.1.2 New "Book Info" panel. Option to delete the .sdr folders for specific books or even the books themselves. Option to view a book with the system's viewer. Added "Book Type" and "Read percent" columns. Color-coded rows based on Finished/Completed state and the presence or not of the actual book. v0.2.1.1 Added a "Modified" date column and option to pass folders or files as arguments. v0.2.0.1 Totally re-written application with new GUI New GitHub repository Initial release v0.1.5 Release version, nothing more to add v0.1.1 Better Highlights detection Cosmetic changes v0.1.0 Initial release Last edited by embryo; 02-07-2024 at 03:10 PM.