Quote:
Originally Posted by Kleki
I tried a 2GB micro SD card (with adapter), despite Jinke's advice to take less or equal 1 GB. And surprise: it worked.
|
OpenInkPot has a discussion of SD cards in its
Installation Guide:
Quote:
Use plain SD formatted with FAT16 - SDHC and MMC cards won't work, FAT32 too. Bootloader also isn't capable to address beyond 1Gb, so either use card <= 1Gb, or make sure whole file is in first 1Gb of card (e.g. by formatting it).
|
This should apply equally to any firmware on any Hanlin V3.