Quote:
Originally Posted by Nation.A.List
Assuming you are trying to re-flash with the Std OS you only need to have 1 file (SmartQ7 or SmartQ5 image get from here; http://en.smartdevices.com.cn/index.html) in the root folder of your SD card. The re-flashing process will create all the necessary folders/files. The best method is to hold down the 'move' key whilst plugging in the mains adapter. When the light turns orange release the 'move key' and follow the prompts. Good luck
|
Thanks a lot Nation.
Unfortunately my attempt at installing Mer 0.16testing did not work.
I put the image and pressed the hold button and plugged the power. The LED blinked gren/yellow/red and booted normally.
I flashed to Ver.4.0 and it worked perfectly for the same button. The light was green/yellow.
Thanks again mate.