[myjalby]

Thanks back up and working.

INFO:bundle /mnt-us/update_kindle_paperwhite_v2_5.8.9.2.bin was successful

i was 95% there. problem i had was the faulty usb cable so when i was in diags originally could not get to connect to pc. just was 2nd guessing myself that i was missing some tools as was most guides were able to transfer files prior or already jailbroken.

is there any checks you recommend i do before removing the serial port.

i will be adding a file to stop any other OTA updates so this does not happen again.

it was your replies to other threads that got me as far as i did, once again thanks

Spoiler:

HW


U-Boot 2009.08-lab126 (Mar 28 2017 - 07:46:02)

CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature: 28 C, calibration data 0x5745005f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock : 66000000Hz
ipg per clock : 66000000Hz
uart clock : 80000000Hz
cspi clock : 60000000Hz
ahb clock : 132000000Hz
axi clock : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock : 396000000Hz
usdhc1 clock : 198000000Hz
usdhc2 clock : 198000000Hz
usdhc3 clock : 198000000Hz
usdhc4 clock : 198000000Hz
MMC: FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Board: Pinot WFO 2GB
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: 02E22*****
S/N: 90D42*****
I2C: ready
DRAM: 256 MB
Using default environment

In: serial
Out: serial
Err: serial
Quick Memory Test 0x80000000, 0xfff0000
POST done in 57 ms
Battery voltage: 4029 mV

Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at 80800000 ...
Image Name: Linux-3.0.35-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2847916 Bytes = 2.7 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK

Starting kernel ...

[ 0.101121]
[ 0.278624] LPDDR2 MfgId: 0x1 [Samsung]
[ 0.282490]
[ 0.282493] just text: vaddr c0171814, va 0xc0171200 pa 0x801000c3 attr 0x6
[ 0.294953]
[ 0.294956] nmx6sl_wfi_iram: vaddr d084e000, va 0xd084e200 pa 0x904043 attr 0x2
[ 0.303816]
[ 0.303819] mx6sl_ddr: vaddr d0856000, va 0xd0856200 pa 0x905043 attr 0x2
[ 0.312154]
[ 0.312158] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
[ 0.322995]
[ 0.322998] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
[ 0.337332]
[ 0.337335] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
[ 0.349466]
[ 0.349469] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
[ 0.359874]
[ 0.359877] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
[ 0.369772]
[ 0.369775] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
3.0.35-lab126 #1 PREEMPT Sun Aug 28 23:11:15 PDT 2016 armv7l
Press [ENTER] for recovery menu... 0 //dev/mmcblk0p4:
CHS=4/16/43584 size=1428160512 bytes
flag type first last lba first lba size
Partition p1:
0x00 0x0b 16 <large> 16 2789360
CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:
Charge: 87% [################################################## ##::::::][ 6.489438] EXT3-fs (mmcblk0p1): error loading journal

update-payload.dat:1 cae986f772345c539419f42acdaac6b1 imx60_wario/uImage 22 main_kernel
128 74134c62f6aaf81dfbc754650b0d7a54 imx60_wario/u-boot.bin 2 bootloader_bin
128 052a280e62187a82ed419844250da9d1 rootfs.img.gz 1593 update_image_rootfs

update-payload.dat:EOF

imx60_wario/u-boot.bin 293828 [######################################]



imx60_wario/uImage 2912892 [######################################]



rootfs.img.gz 208808064 [######################################]



imx60_wario/u-boot.bin 293828 [######################################]
imx60_wario/uImage 2912892 [######################################]
rootfs.img.gz 208808064 [######################################]
2912892 [######################################]
293828 [######################################]

=== kernel printk buffer (25806 bytes) ===
<5>[ 0.000000] Linux version 3.0.35-lab126 (jenkins-official@sjc10-jbuild07) (collect2: error: ld returned 1 exit status) #1 PREEMPT Sun Aug 28 23:11:15 PDT 2016
<4>[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
<4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[ 0.000000] Machine: Freescale i.MX 6SoloLite based Wario Board
<6>[ 0.000000] Will try to place printk log at 8fff0000
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<6>[ 0.000000] CPU identified as i.MX6SoloLite, silicon rev 1.2
<7>[ 0.000000] On node 0 totalpages: 65536
<7>[ 0.000000] free_area_init_node: node 0, pgdat c05c43f0, node_mem_map c2000000
<7>[ 0.000000] DMA zone: 64 pages used for memmap
<7>[ 0.000000] DMA zone: 0 pages reserved
<7>[ 0.000000] DMA zone: 8128 pages, LIFO batch:0
<7>[ 0.000000] Normal zone: 448 pages used for memmap
<7>[ 0.000000] Normal zone: 56896 pages, LIFO batch:15
<7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[ 0.000000] pcpu-alloc: [0] 0
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
<5>[ 0.000000] Kernel command line: rootwait log_pos_goal=0x8fff0000 console=ttymxc0,115200 root=/dev/mmcblk0p1 ro ip=off quiet video=mxcepdcfb:E60,bpp=8,x_mem=3M
<4>[ 0.000000] Prink buffer will be relocated to physical address: 8fff0000
<6>[ 0.000000] log_buf_len: 32768
<6>[ 0.000000] early log buf free: 31326(95%)
<6>[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.000000] Memory: 256MB = 256MB total
<5>[ 0.000000] Memory: 253700k/253700k available, 8444k reserved, 0K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] DMA : 0xfde00000 - 0xffe00000 ( 32 MB)
<5>[ 0.000000] vmalloc : 0xd0800000 - 0xf2000000 ( 536 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
<5>[ 0.000000] .init : 0xc0008000 - 0xc015e000 (1368 kB)
<5>[ 0.000000] .text : 0xc015e000 - 0xc058d000 (4284 kB)
<5>[ 0.000000] .data : 0xc058e000 - 0xc05cb7a8 ( 246 kB)
<5>[ 0.000000] .bss : 0xc05cb7cc - 0xc05f21c0 ( 155 kB)
<6>[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>[ 0.000000] Preemptible hierarchical RCU implementation.
<6>[ 0.000000] Verbose stalled-CPUs detection is disabled.
<6>[ 0.000000] NR_IRQS:624
<6>[ 0.000000] MXC GPIO hardware
<6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
<6>[ 0.000000] arm_max_freq=1GHz
<6>[ 0.000000] MXC_Early serial console at MMIO 0x2020000 (options '115200')
<6>[ 0.000000] bootconsole [ttymxc0] enabled
<6>[ 0.000000] Console: colour dummy device 80x30
<6>[ 0.000266] Calibrating delay loop... 1980.82 BogoMIPS (lpj=9904128)
<6>[ 0.060097] pid_max: default: 32768 minimum: 301
<6>[ 0.060344] Mount-cache hash table entries: 512
<6>[ 0.060696] CPU: Testing write buffer coherency: ok
<6>[ 0.060843] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
<6>[ 0.068126] print_constraints: dummy:
<6>[ 0.068300] NET: Registered protocol family 16
<6>[ 0.072882] print_constraints: vddpu: 725 <--> 1300 mV at 700 mV fast normal
<6>[ 0.073215] print_constraints: vddcore: 725 <--> 1300 mV at 1475 mV fast normal
<6>[ 0.073544] print_constraints: vddsoc: 725 <--> 1300 mV at 1475 mV fast normal
<6>[ 0.073878] print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal
<6>[ 0.074245] print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal
<6>[ 0.074594] print_constraints: vdd3p0: 2625 <--> 3400 mV at 3000 mV fast normal
<4>[ 0.076394] LAB126 Board id - 02E22*****
<6>[ 0.081237] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
<6>[ 0.081251] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
<6>[ 0.081265] hw-breakpoint: maximum watchpoint size is 4 bytes.
<6>[ 0.081284] L310 cache controller enabled
<6>[ 0.081295] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x02030000, Cache size: 262144 B
<6>[ 0.093405] bio: create slab <bio-0> at 0
<6>[ 0.096991] max77696> regulator init
<6>[ 0.098044] spi_imx imx6q-ecspi.0: probed
<6>[ 0.098446] usbcore: registered new interface driver usbfs
<6>[ 0.098579] usbcore: registered new interface driver hub
<6>[ 0.098739] usbcore: registered new device driver usb
<4>[ 0.101088] Reboot Reason - Metric Framework Reporting
<6>[ 0.101105] kernel: kernel_metric_generic,0,counter,event_recorder,erc flags,SFT_PRSTRT,1,
<4>[ 0.101114] Reboot Reason - Legacy Metric Reporting
<3>[ 0.101121]
<6>[ 0.104240] MAX77696 TOPSYS 1.0.0 Installed
<6>[ 0.107050] max77696-gpio max77696-gpio.0: gpio#0 -- -- func-0 in
<6>[ 0.108562] max77696-gpio max77696-gpio.0: gpio#1 -- -- func--1 in
<6>[ 0.110070] max77696-gpio max77696-gpio.0: gpio#3 -- -- func-0 in
<6>[ 0.112403] MAX77696 GPIO Driver 1.0.0 Installed
<4>[ 0.113474] buck mode: 4
<4>[ 0.114238] buck mode: 4
<6>[ 0.115212] print_constraints: max77696_buck1: 900 <--> 1300 mV at 1250 mV fast normal idle standby
<4>[ 0.115809] buck mode: 4
<6>[ 0.116788] print_constraints: max77696_buck1dvs: 600 <--> 1300 mV at 900 mV fast normal idle standby
<4>[ 0.117357] buck mode: 4
<4>[ 0.118116] buck mode: 4
<6>[ 0.119085] print_constraints: max77696_buck2: 900 <--> 1300 mV at 1200 mV fast normal idle standby
<4>[ 0.119661] buck mode: 4
<6>[ 0.120677] print_constraints: max77696_buck2dvs: 600 <--> 1300 mV at 900 mV fast normal idle standby
<6>[ 0.121276] print_constraints: max77696_buck3: 600 <--> 3387 mV at 1300 mV fast normal idle standby
<4>[ 0.122026] buck mode: 4
<4>[ 0.122786] buck mode: 4
<6>[ 0.123545] print_constraints: max77696_buck4: 1200 mV fast normal idle standby
<4>[ 0.124129] buck mode: 4
<6>[ 0.125101] print_constraints: max77696_buck5: 600 <--> 3387 mV at 1800 mV fast normal idle standby
<4>[ 0.125672] buck mode: 2
<6>[ 0.126647] print_constraints: max77696_buck6: 600 <--> 3387 mV at 3200 mV fast normal idle standby
<6>[ 0.126689] MAX77696 Buck Regulators Driver 1.0.1 Installed
<6>[ 0.127568] print_constraints: max77696_ldo1: 800 <--> 3950 mV at 3300 mV normal idle standby
<6>[ 0.128166] print_constraints: max77696_ldo2: 800 <--> 3950 mV at 3000 mV normal idle standby
<6>[ 0.128748] print_constraints: max77696_ldo3: 800 <--> 3950 mV at 2500 mV normal idle standby
<6>[ 0.129358] print_constraints: max77696_ldo4: 800 <--> 2375 mV at 1800 mV normal idle standby
<6>[ 0.129941] print_constraints: max77696_ldo5: 800 <--> 2375 mV at 1800 mV normal idle standby
<6>[ 0.130667] print_constraints: max77696_ldo6: 800 <--> 3950 mV at 3200 mV normal idle standby
<6>[ 0.131275] print_constraints: max77696_ldo7: 800 <--> 3950 mV at 3200 mV normal idle standby
<6>[ 0.131861] print_constraints: max77696_ldo8: 800 <--> 2375 mV at 1100 mV normal idle standby
<6>[ 0.132463] print_constraints: max77696_ldo9: 800 <--> 2375 mV at 1100 mV normal idle standby
<6>[ 0.133054] print_constraints: max77696_ldo10: 2400 <--> 5550 mV at 5200 mV normal idle standby
<6>[ 0.133870] MAX77696 Linear Regulators Driver 1.0.2 Installed
<6>[ 0.134573] print_constraints: max77696_lsw1:
<6>[ 0.135351] print_constraints: max77696_lsw2:
<6>[ 0.136085] print_constraints: max77696_lsw3:
<6>[ 0.136829] print_constraints: max77696_lsw4:
<6>[ 0.137275] MAX77696 Load Switches Driver 1.0.0 Installed
<6>[ 0.138529] print_constraints: max77696-display:
<6>[ 0.139340] print_constraints: max77696-vcom:
<6>[ 0.139698] print_constraints: max77696-vee:
<6>[ 0.140056] print_constraints: max77696-vneg:
<6>[ 0.140806] print_constraints: max77696-vpos:
<6>[ 0.141189] print_constraints: max77696-vddh:
<6>[ 0.142221]
<6>[ 0.142225] EPD vreg probe complete!
<6>[ 0.142870] print_constraints: max77696_vddq: 240 <--> 984 mV at 600 mV
<6>[ 0.142931] MAX77696 LPDDR2 Termination Supply Driver 1.0.1 Installed
<6>[ 0.144376] MAX77696 I2C Driver 1.0.0 Installed
<6>[ 0.146718] Advanced Linux Sound Architecture Driver Version 1.0.24.
<4>[ 0.147371] i2c-core: driver [max17135] using legacy suspend method
<4>[ 0.147382] i2c-core: driver [max17135] using legacy resume method
<6>[ 0.147412] Switching to clocksource mxc_timer1
<6>[ 0.160004] NET: Registered protocol family 2
<6>[ 0.160098] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.160283] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>[ 0.160401] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>[ 0.160476] TCP: Hash tables configured (established 8192 bind 8192)
<6>[ 0.160485] TCP reno registered
<6>[ 0.160494] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.160511] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.160820] NET: Registered protocol family 1
<6>[ 0.161023] RPC: Registered named UNIX socket transport module.
<6>[ 0.161034] RPC: Registered udp transport module.
<6>[ 0.161041] RPC: Registered tcp transport module.
<6>[ 0.161048] RPC: Registered tcp NFSv4.1 backchannel transport module.
<4>[ 0.166218] etb: probe of etb failed with error -2
<4>[ 0.166525] etm: probe of etm.0 failed with error -2
<6>[ 0.166819] Static Power Management for Freescale i.MX6
<6>[ 0.166829] wait mode is enabled for i.MX6
<6>[ 0.166990] cpaddr = 0 suspend_iram_base=f2900000
<6>[ 0.167034] PM driver module loaded
<6>[ 0.167331] IMX usb wakeup probe
<7>[ 0.167354] the wakeup pdata is 0xce104400
<6>[ 0.168095] IMX usb wakeup probe
<7>[ 0.168115] the wakeup pdata is 0xce104200
<6>[ 0.168288] cpu regulator mode:ldo_bypass
<6>[ 0.168698] i.MXC CPU frequency driver
<6>[ 0.185479] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 0.186588] msgmni has been set to 495
<6>[ 0.187066] io scheduler noop registered
<6>[ 0.187152] io scheduler cfq registered (default)
<6>[ 0.187725] MAX77696 Backlight Driver 1.0.0 Installed
<6>[ 0.188586] imx-sdma imx-sdma: loaded firmware 1.1
<6>[ 0.193563] imx-sdma imx-sdma: initialized
<6>[ 0.195660] Serial: IMX driver
<6>[ 0.195774] imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
<6>[ 0.195803] console [ttymxc0] enabled, bootconsole disabled
<6>[ 0.200768] loop: module loaded
<6>[ 0.201038] MAX77696 32kHz Oscillator Driver 1.0.0 Installed
<6>[ 0.201667] input: max77696-onkey as /devices/platform/imx-i2c.0/i2c-0/0-003c/max77696-onkey.0/input/input0
<6>[ 0.204940] MAX77696 ONKEY Driver 1.0.0 Installed
<7>[ 0.218214] max77696-rtc max77696-rtc.0: read time:
<7>[ 0.218230] max77696-rtc max77696-rtc.0: YEAR 00 MONTH 01 DOM 02 DOW 02 HOUR 01 MIN 2F SEC 33
<7>[ 0.218244] max77696-rtc max77696-rtc.0: --> 2000-01-02 Mon 01:47:51
<7>[ 0.218680] max77696-rtc max77696-rtc.0: read alarm0:
<7>[ 0.218692] max77696-rtc max77696-rtc.0: YEAR 00 MONTH 01 DOM 01 HOUR 00 MIN 00 SEC 00
<7>[ 0.218704] max77696-rtc max77696-rtc.0: --> 2000-01-01 00:00:00
<6>[ 0.218953] max77696-rtc max77696-rtc.0: rtc core: registered max77696-rtc.0 as rtc0
<7>[ 0.238090] max77696-rtc max77696-rtc.0: read time:
<7>[ 0.238104] max77696-rtc max77696-rtc.0: YEAR 00 MONTH 01 DOM 02 DOW 02 HOUR 01 MIN 2F SEC 33
<7>[ 0.238117] max77696-rtc max77696-rtc.0: --> 2000-01-02 Mon 01:47:51
<7>[ 0.238551] max77696-rtc max77696-rtc.0: read alarm1:
<7>[ 0.238563] max77696-rtc max77696-rtc.0: YEAR 00 MONTH 01 DOM 01 HOUR 00 MIN 00 SEC 00
<7>[ 0.238575] max77696-rtc max77696-rtc.0: --> 2000-01-01 00:00:00
<6>[ 0.238778] max77696-rtc max77696-rtc.0: rtc core: registered max77696-rtc.1 as rtc1
<7>[ 0.240302] max77696-rtc max77696-rtc.0: 1 minute interrupt: off
<7>[ 0.240312] max77696-rtc max77696-rtc.0: 1 second interrupt: off
<7>[ 0.258104] max77696-rtc max77696-rtc.0: read time:
<7>[ 0.258118] max77696-rtc max77696-rtc.0: YEAR 00 MONTH 01 DOM 02 DOW 02 HOUR 01 MIN 2F SEC 33
<7>[ 0.258131] max77696-rtc max77696-rtc.0: --> 2000-01-02 Mon 01:47:51
<7>[ 0.258144] max77696-rtc max77696-rtc.0: current time *** 2000-01-02 Mon 01:47:51
<6>[ 0.258151] MAX77696 RTC Driver 1.0.2 Installed
<6>[ 0.258904] snvs_rtc snvs_rtc.0: rtc core: registered snvs_rtc as rtc2
<6>[ 0.259101] i2c /dev entries driver
<6>[ 0.263273] max77696-battery max77696-battery.0: Voltage alert 3400mV ... 4260mV
<6>[ 0.263697] max77696-battery max77696-battery.0: SOC alert (disabled)
<6>[ 0.264633] MAX77696 Fuel Gauge Driver 1.0.0 Installed
<6>[ 0.266848] MAX77696 USB Interface Circuit Driver 1.0.0 Installed
<6>[ 0.268639] max77696-adc max77696-adc.0: ADC average rate: 32 sample(s)
<6>[ 0.268650] max77696-adc max77696-adc.0: ADC delay: 0 nsec
<6>[ 0.268659] max77696-adc max77696-adc.0: ADC cur src: 50 uA
<6>[ 0.268671] MAX77696 ADC Driver 1.0.1 Installed
<6>[ 0.269286] imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=1)
<6>[ 0.270130] sdhci: Secure Digital Host Controller Interface driver
<6>[ 0.270145] sdhci: Copyright(c) Pierre Ossman
<6>[ 0.270272] mmc0: no vmmc regulator found
<7>[ 0.271291] sdhci: =========== REGISTER DUMP (mmc0)===========
<4>[ 0.271301]
<4>[ 0.271304] 0xd0858000: 00000000 00010200 00000000 083a0000
<4>[ 0.271316] 0xd0858010: 00000900 a7ffffff 320f5a03 00000b00
<4>[ 0.271328] 0xd0858020: 00000000 ff888088 08800024 008e0118
<4>[ 0.271339] 0xd0858030: 00000000 007f0003 007f0003 00000000
<4>[ 0.271350] 0xd0858040: 07f3b407 08000880 00000011 00000000
<4>[ 0.271361] 0xd0858050: 00000000 00000000 00000000 00000000
<4>[ 0.271371] 0xd0858060: 00000000 00000200 00000000 0800ff00
<4>[ 0.271382] 0xd0858070: 00000000 00000000 00000000 00000000
<4>[ 0.271393] 0xd0858080: 00000000 00000000 00000000 00000000
<4>[ 0.271403] 0xd0858090: 00000000 00000000 00000000 00000000
<4>[ 0.271414] 0xd08580a0: 00000000 00000000 00000000 00000000
<4>[ 0.271424] 0xd08580b0: 00000000 00000000 00000000 00000000
<4>[ 0.271434] 0xd08580c0: 2000780b 00000000 00000006 00212800
<7>[ 0.271449] CCM: CSCMR1(0x00900040), CSCDR1(0x00490b40)
<7>[ 0.271457] CCM: CCOSR(0x000a000c), CCGR6(0x00000030)
<7>[ 0.271463] CCM: CMEOR(0x7fffffff)
<7>[ 0.271470] sdhci: ===========================================
<6>[ 0.271828] mmc0: SDHCI controller on platform [sdhci-esdhc-imx.1] using DMA
<6>[ 0.272903] mmc1: no vmmc regulator found
<7>[ 0.273918] sdhci: =========== REGISTER DUMP (mmc1)===========
<4>[ 0.273926]
<4>[ 0.273929] 0xd0860000: 00000000 00010000 00000000 00000000
<4>[ 0.273940] 0xd0860010: 00000000 00000000 00000000 00000000
<4>[ 0.273951] 0xd0860020: 00000000 ff888088 08800020 0080800f
<4>[ 0.273963] 0xd0860030: 00000000 007f0003 007f0003 00000000
<4>[ 0.273974] 0xd0860040: 07f3b407 08100810 80000000 00000000
<4>[ 0.273986] 0xd0860050: 00000000 00000000 00000000 00000000
<4>[ 0.273996] 0xd0860060: 00000000 00000200 00000000 0800ff00
<4>[ 0.274008] 0xd0860070: 00000000 00000000 00000000 00000000
<4>[ 0.274019] 0xd0860080: 00000000 00000000 00000000 00000000
<4>[ 0.274029] 0xd0860090: 00000000 00000000 00000000 00000000
<4>[ 0.274040] 0xd08600a0: 00000000 00000000 00000000 00000000
<4>[ 0.274051] 0xd08600b0: 00000000 00000000 00000000 00000000
<4>[ 0.274061] 0xd08600c0: 2000780b 00000000 00000006 00212800
<7>[ 0.274075] CCM: CSCMR1(0x00900040), CSCDR1(0x00490b40)
<7>[ 0.274083] CCM: CCOSR(0x000a000c), CCGR6(0x000000c0)
<7>[ 0.274089] CCM: CMEOR(0x7fffffff)
<7>[ 0.274094] sdhci: ===========================================
<6>[ 0.274197] mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz
<6>[ 0.275569] mmc1: SDHCI controller on platform [sdhci-esdhc-imx.2] using DMA
<7>[ 0.276283] Registered led device: max77696-leds.0
<6>[ 0.276293] MAX77696 LED Driver #0 1.0.0 Installed
<7>[ 0.276471] Registered led device: max77696-leds.1
<6>[ 0.276481] MAX77696 LED Driver #1 1.0.0 Installed
<6>[ 0.277010] usbcore: registered new interface driver snd-usb-audio
<6>[ 0.277021] ALSA device list:
<6>[ 0.277027] No soundcards found.
<6>[ 0.277364] nf_conntrack version 0.5.0 (3964 buckets, 15856 max)
<6>[ 0.278388] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 0.278454] TCP cubic registered
<6>[ 0.278464] NET: Registered protocol family 17
<6>[ 0.278487] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
<3>[ 0.278624] LPDDR2 MfgId: 0x1 [Samsung]
<3>[ 0.282490]
<3>[ 0.282493] just text: vaddr c0171814, va 0xc0171200 pa 0x801000c3 attr 0x6
<3>[ 0.294953]
<3>[ 0.294956] nmx6sl_wfi_iram: vaddr d084e000, va 0xd084e200 pa 0x904043 attr 0x2
<3>[ 0.303816]
<3>[ 0.303819] mx6sl_ddr: vaddr d0856000, va 0xd0856200 pa 0x905043 attr 0x2
<3>[ 0.312154]
<3>[ 0.312158] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
<3>[ 0.322995]
<3>[ 0.322998] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
<3>[ 0.337332]
<3>[ 0.337335] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
<3>[ 0.349466]
<3>[ 0.349469] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
<3>[ 0.359874]
<3>[ 0.359877] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
<3>[ 0.369772]
<3>[ 0.369775] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
<6>[ 0.382605] Bus freq driver module loaded
<6>[ 0.382618] Bus freq driver Enabled
<6>[ 0.389102] mxc_dvfs_core_probe
<6>[ 0.389377] DVFS driver module loaded
<4>[ 0.391311] regulator_init_complete: max77696_ldo10: incomplete constraints, leaving on
<4>[ 0.391962] regulator_init_complete: max77696_ldo7: incomplete constraints, leaving on
<4>[ 0.392188] regulator_init_complete: max77696_ldo6: incomplete constraints, leaving on
<4>[ 0.393474] regulator_init_complete: max77696_buck6: incomplete constraints, leaving on
<4>[ 0.393698] regulator_init_complete: max77696_buck5: incomplete constraints, leaving on
<4>[ 0.394190] regulator_init_complete: max77696_buck2dvs: incomplete constraints, leaving on
<4>[ 0.396451] regulator_init_complete: max77696_buck1dvs: incomplete constraints, leaving on
<7>[ 0.418089] max77696-rtc max77696-rtc.0: read time:
<7>[ 0.418103] max77696-rtc max77696-rtc.0: YEAR 00 MONTH 01 DOM 02 DOW 02 HOUR 01 MIN 2F SEC 33
<7>[ 0.418117] max77696-rtc max77696-rtc.0: --> 2000-01-02 Mon 01:47:51
<6>[ 0.418140] max77696-rtc max77696-rtc.0: setting system clock to 2000-01-02 01:47:51 UTC (946777671)
<6>[ 0.428171] KERNEL: I pmic:charger chgina::charger connected
<6>[ 0.428484] emmc: I def:mmcpartinfo:vendor=toshiba, host=mmc0:
<6>[ 0.436789] MAX77696 Main Charger Driver 1.0.0 Installed
<6>[ 0.440182] MAX77696 Energy Harvester Driver 1.0.0 Installed
<6>[ 0.440813] Freeing init memory: 1368K
<6>[ 0.463103] mmc0: new high speed DDR MMC card at address 0001
<6>[ 0.463417] mmcblk0: mmc0:0001 002G49 1.82 GiB
<6>[ 0.463548] mmcblk0boot0: mmc0:0001 002G49 partition 1 1.00 MiB
<6>[ 0.463675] mmcblk0boot1: mmc0:0001 002G49 partition 2 1.00 MiB
<6>[ 0.464524] mmcblk0: p1 p2 p3 p4
<6>[ 0.467206] mmcblk0boot1: unknown partition table
<6>[ 0.469585] mmcblk0boot0: unknown partition table
<6>[ 0.469789] mmc1: mmc_rescan_try_freq: trying to init card at 400000 Hz
<6>[ 0.546063] mmc1: mmc_rescan_try_freq: trying to init card at 300000 Hz
<4>[ 0.552821] INFO:find_file:118 Found 320_G095_AAE302_ED060XD4T1_TC.wrf.gz
<4>[ 0.552886] ERROR:wfm_count=1
<4>[ 0.553108] mxc_epdc_eink: module license 'proprietary' taints kernel.
<4>[ 0.553119] Disabling lock debugging due to kernel taint
<4>[ 0.553483] INFO:Loaded module /lib/modules/mxc_epdc_eink.ko (10644 bytes)
<6>[ 0.617171] mmc1: mmc_rescan_try_freq: trying to init card at 200000 Hz
<6>[ 0.689782] mmc1: mmc_rescan_try_freq: trying to init card at 100000 Hz
<6>[ 1.187455] add wake up source irq 104
<6>[ 1.703271] Retrieved voltage control information
<6>[ 2.257486] KERNEL: I pmic:fg battery id check::wario_battery_valid=1
<4>[ 3.918395] INFO:Loaded module /lib/modules/mxc_epdc_fb.ko (119260 bytes)
<4>[ 4.248496] INFO:eink initialized... (786432 bytes)
<4>[ 5.257216] INFO:!!! Checking MBR /dev/mmcblk0 !!!!
<4>[ 5.262575] INFOartition 2, start sector is 782336
<4>[ 5.262744] INFOartition 3, start sector is 913408
<4>[ 5.262912] INFOartition 4, start sector is 1044480
<4>[ 5.263048] INFO:maximizing partition 2789376 sectors
<4>[ 5.263103] INFO:*** Partition table verified for /dev/mmcblk0 ***
<4>[ 5.265606] INFO:Setup loop device /dev/loop0 for /dev/mmcblk0p4 + 8192
<4>[ 5.269293] INFO:Checking for updates... (auto-pilot mode)
<4>[ 5.269669] INFO:find_file:118 Found update_kindle_paperwhite_v2_5.8.9.2.bin
<4>[ 5.270270]
<4>[ 5.271650] INFO:Found bundle /mnt-us/update_kindle_paperwhite_v2_5.8.9.2.bin
<4>[ 5.271687] INFO:*** NORMAL MODE
<4>[ 5.356387] *** CHECKING /mnt-us/update_kindle_paperwhite_v2_5.8.9.2.bin ***
<4>[ 6.466182] INFO:do_unbundle: filename=/mnt-us/update_kindle_paperwhite_v2_5.8.9.2.bin, new_file=0x0001516c
<4>[ 6.479953] INFOevice code matched (D4).
<6>[ 6.488891] EXT3-fs: barriers not enabled
<4>[ 6.489409] JBD: no valid journal superblock found
<3>[ 6.489438] EXT3-fs (mmcblk0p1): error loading journal
<4>[ 6.507542] ERROR:/dev/mmcblk0p1:error 22(22)
<4>[ 6.507574] ERROR:Not able to read software version, problem with mounting rootfsINFO:Signed with official 2K cert.
<4>[ 6.507664] INFO:Verifying signature (len: 256)
<4>[ 29.545990] ERROR: signature is not the correct length (128 bytes versus 256 bytes)
<4>[ 29.552340] INFO:Signature check succeeded.
<4>[ 29.594484] IGNORING FILE: update-payload.dat
<4>[ 29.647501] INFO:Total progress is 1%
<4>[ 29.647597] CHK: imx60_wario/u-boot.bin hash for UBoot:
<4>[ 29.647663] MD5: 74134c62f6aaf81dfbc754650b0d7a54
<4>[ 29.648233] SHA256: 3c185e6397d94bc33099db1948feaf421bb13017abe3421680 612199e438dac0
<4>[ 29.649469] SIGNATURE FILE: imx60_wario/u-boot.bin.sig
<4>[ 29.649553] INFO:Total progress is 1%
<4>[ 29.649646] INFO:imx60_wario/u-boot.bin.sig:sig_len=256
<4>[ 30.177260] INFO:Total progress is 3%
<4>[ 30.177355] CHK: imx60_wario/uImage hash for UImage:
<4>[ 30.177489] MD5: cae986f772345c539419f42acdaac6b1
<4>[ 30.178091] SHA256: 28d012cd860a383ca80ecad8a43783fe23a9cd41a8f4aa970c d2371d89e1d5c9
<4>[ 30.179279] SIGNATURE FILE: imx60_wario/uImage.sig
<4>[ 30.179361] INFO:Total progress is 3%
<4>[ 30.179455] INFO:imx60_wario/uImage.sig:sig_len=256
<4>[ 67.382660] INFO:Total progress is 13%
<4>[ 67.382756] CHK: rootfs.img.gz hash for RootFS:
<4>[ 67.382820] MD5: 052a280e62187a82ed419844250da9d1
<4>[ 67.383370] SHA256: 8bb396e4dfd3ed28434318f175270f8f7c2afee761e55a8cb9 7857203b9e8ab1
<4>[ 67.384577] SIGNATURE FILE: rootfs.img.gz.sig
<4>[ 67.384672] INFO:Total progress is 13%
<4>[ 67.384762] INFO:rootfs.img.gz.sig:sig_len=256
<4>[ 67.384851] SIGNATURE FILE: update-payload.dat.sig
<4>[ 67.384879] IGNORING SIGNATURE FILE: update-payload.dat.sig
<4>[ 67.386493] INFO:*** bundle sizes: UImage[2912892 / 14680064], RootFS[366739456 / 367001600], UBoot[293828 / 458752], DiagsFS[0 / 67108864], Diags Kernel[0 / 14680064], Userdata[0 / 1148960768], fbios[0 / 0], sbios[0 / 0]
<4>[ 67.386655] ERROR: signature is not the correct length (128 bytes versus 256 bytes)
<4>[ 67.393121] INFO:UImage:Present siglen=256 sigpassed=Yes
<4>[ 67.393262] ERROR: signature is not the correct length (128 bytes versus 256 bytes)
<4>[ 67.399521] INFO:RootFS:Present siglen=256 sigpassed=Yes
<4>[ 67.399654] ERROR: signature is not the correct length (128 bytes versus 256 bytes)
<4>[ 67.406945] INFO:UBoot:Present siglen=256 sigpassed=Yes
<4>[ 67.406976] INFOiagsFS:missing
<4>[ 67.406996] INFOiags Kernel:missing
<4>[ 67.407017] INFO:Userdata:missing
<4>[ 67.407036] INFO:fbios:missing
<4>[ 67.407054] INFO:sbios:missing
<4>[ 67.407093] *** UPDATING /mnt-us/update_kindle_paperwhite_v2_5.8.9.2.bin (Attempt #1) ***
<4>[ 67.407228] INFO:do_unbundle: filename=/mnt-us/update_kindle_paperwhite_v2_5.8.9.2.bin, new_file=0x0001621c
<4>[ 67.450201] INFO:Updating imx60_wario/u-boot.bin
<4>[ 67.509854] INFO:Total progress is 16%
<4>[ 67.509951] INFO:imx60_wario/u-boot.bin update successful
<4>[ 67.510038] INFO:Updating imx60_wario/uImage
<4>[ 68.057003] INFO:Total progress is 18%
<4>[ 68.057101] INFO:imx60_wario/uImage update successful
<4>[ 317.702465] INFO:Total progress is 85%
<4>[ 317.891459] INFO:rootfs.img.gz update successful
<4>[ 317.892500] INFO:Installation had uImage. Installing it.
<4>[ 317.892538] INFO:Copying /uImage to /dev/mmcblk0 ...
<4>[ 318.733947] INFO:Copying /uboot to /dev/mmcblk0boot0 ...
<4>[ 318.807912] INFO:removing /mnt-us/update_kindle_paperwhite_v2_5.8.9.2.bin
<4>[ 318.906433] INFO:bundle /mnt-us/update_kindle_paperwhite_v2_5.8.9.2.bin was successful
<4>[ 321.016734] INFO:Rebooting ...
<6>[ 322.142419] Device spi0.0 removed

=== END ===
[ 330.123664] imx2-wdt imx2-wdt.0: Device shutdown: Expect reboot!
[ 330.131060] Restarting system.