Hi, SD card should be formatted FAT32, but I think you have that, as it's sometimes seen by the device.
What you have sems to be either a hardware problem, or -more likely- a firmware problem with not recognized drivers.
My suggestion would be to reflash the firmware from scratch, i.e. beginnig with
dealerupdate091210_EU.zip
then 2.0.6,
finally 2.1.1 (if you like)
the dealerupdate will clean the system completely, and 2.0.6 is necessary as a base for 2.1.0 / 1
All three versions can be found on PB support-page
Regards,Troll
Last edited by troll05; 07-19-2011 at 12:00 PM.
|