[twobob]

*cough*

k4 non-touch and K4 black version, depending on the version of the original system, the installation method is not the same. View the version number of the original system: click menu to select the settings, and click again to the menu, the bottom right corner of the version can be seen at the original system version number in the original system. The original system was 4.00 and 4.01 with the following two-step installation method, the original system 4.10 Please use the following the DDQ installation method. Duokan2012 two-step installation method (4.00 and 4.01) installation "2012" to the Kindle 4 see more, just need to manually restart the Kindle once do not need to use the installer does not need to enter debug mode. 1. copy DK_System and data.tar.gz (in the windows system, data.tar.gz may hide the default format display only data.tar, this is normal) 1.1 Connect the USB cable the copy DK_System folder to the Kindle disk. 1.2 copy "K4_4.0.0_to_4.0.1 _ version "folder under the data.tar.gz of Kindle disk. 1.3 popup Kindle disk. 1.4 Unplug the USB cable . manually restart the Kindle 2.1 buttons Menu -> select Settings -> click OK -> button again Menu -> Restart 2.2 Restart is selected , will automatically release and run the install script after the installation is completed the Kindle automatically enter to see more, please be patient, the installation process takes about five minutes (the installation process will install interface) Description: must be strictly in accordance with the previously described steps, the first pop-up Kindle disk, and then pull the USB cable. If unsuccessful, again copy data.tar.gz and repeat step 2 can. Duokan2012 the DDQ installation method (4.10) 1 Copy the installation files, restart the Kindle 1.1 connection USB cable, copy the installation files to the Kindle disk; pop-up Kindle disk Unplug the USB cable. Copies of the file list is as follows : folder DK_System, diagnostic_logs files: ENABLE_DIAGS, data.tar.gz Note: In addition to the DK_System folder, the rest of the folders and files stored path is the "K4_4.1.0_ version 1.2 Restart Kindle folder . If you do not know how to restart the Kindle, follow the steps to confirm the Restart menu. The restart the characteristic picture: trees, lightning: (1) Press the HOME key to reach the main page (2), selected Settings pop-up menu (3) Press the MENU key , press the button 5-WAY determine (4) Press the MENU key, pop-up menu (5) selected Restart, sure . diagnostic mode selection the DDQ menu, installation to see more ( Note, the third step is the left button !) 2.1 5-WAY button to select D) Exit, Reboot or Disable Diags press 2.2 Select D) the Disable Diagnostics five to key the button to confirm the five recognized to key in key 2.3 select Q) To continue, press five to the key of the left button to confirm DDQ, K4 will restart to enter automatically install interface, approximately 2 minute installed. Installation interface is shown in Figure 9-14. After installation automatically restart, enter to look at the system.

*cough*