MobileRead Forums - View Single Post - PRS-T1 PRS-T1 run from SD card / UART recovery from broken internal flash

jpa · 04-26-2020, 03:21 PM

Here is the SD card image. It has adb enabled, but otherwise stock firmware 1.0.07. Install to SD card (minimum 4 GB card, at least up to 16 GB works) using dd on a Linux PC:

Code:

unxz sd_card_PRS-T1_1.0.07_adb_enabled.bin.xz
dd if=sd_card_PRS-T1_1.0.07_adb_enabled.bin of=/dev/mmcblk0 bs=1M status=progress

You can resize the partitions quite freely with gparted. Just don't touch the unallocated space before the first partition, as that contains the kernel.

04-26-2020, 03:21 PM	#2
jpa Junior Member Posts: 3 Karma: 53192 Join Date: Apr 2020 Device: Sony PRS-T1	Here is the SD card image. It has adb enabled, but otherwise stock firmware 1.0.07. Install to SD card (minimum 4 GB card, at least up to 16 GB works) using dd on a Linux PC: Code: unxz sd_card_PRS-T1_1.0.07_adb_enabled.bin.xz dd if=sd_card_PRS-T1_1.0.07_adb_enabled.bin of=/dev/mmcblk0 bs=1M status=progress You can resize the partitions quite freely with gparted. Just don't touch the unallocated space before the first partition, as that contains the kernel.