MobileRead Forums - View Single Post - Bebook dead

Kleki · 09-11-2009, 05:19 AM

I have the same problem sometimes. Here's what to do:

1) Take out the battery
2) Boot with USB cable plugged in
3) Replace the battery (cable still plugged in)
4) Wait 10 minutes

Now you should be able to boot without cable again. If not, wait longer in step 4) or try booting with both battery and cable in place.

A similar solution is described on the jinke web site.

While I always get the book working again it is very annoying when this happens out of reach of my laptop. This is really what keeps me from recommending the Hanlin V3.

hth

09-11-2009, 05:19 AM	#2
Kleki Connoisseur Posts: 58 Karma: 192 Join Date: Mar 2009 Location: Cologne area, Germany Device: Pocketbook Touch HD3 (+ an old Hanlin V3)	I have the same problem sometimes. Here's what to do: 1) Take out the battery 2) Boot with USB cable plugged in 3) Replace the battery (cable still plugged in) 4) Wait 10 minutes Now you should be able to boot without cable again. If not, wait longer in step 4) or try booting with both battery and cable in place. A similar solution is described on the jinke web site. While I always get the book working again it is very annoying when this happens out of reach of my laptop. This is really what keeps me from recommending the Hanlin V3. hth